Can a C2 license be upgraded to a C1 license?

1 Answers
MacLandon
07/30/25 9:18am
C2 can be upgraded to C1. The conditions for upgrading from a C2 driver's license to a C1 license are as follows: You need to hold a C2 driver's license, an ID card, and a health certificate, and apply at the vehicle management office that issued the C2 driver's license. You will need to study and take exams. After passing, you can exchange it for a C1 driver's license. If you already hold a motor vehicle driver's license and apply to add a permitted driving model, you should not have a record of 12 or more penalty points in this scoring cycle and the most recent scoring cycle before applying. C1 driver's license test: The test subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing standards: Traffic regulations and related knowledge (Subject 1) — written test, full score is 100 points, 90 points or above is a pass. Field driving (Subject 2) — on-site, actual vehicle. The minimum requirement is 80 points, below 80 points is a fail. Road driving (Subject 3) — highway or simulated field, actual vehicle. Full score is 100 points, must achieve 90 points or above to pass. Safe and civilized driving knowledge — written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single-choice, and multiple-choice, totaling 50 questions, full score is 100 points, 90 points is a pass.
Was this review help?
10
3
Share
More Forum Discussions

What are the symptoms of a faulty ECU in a Haval H3?

If there is an issue with the vehicle's ECU, the malfunction indicator light will illuminate. Persistent Malfunction Light: The engine malfunction light stays on continuously. If other engine hardware checks out fine but the light remains on, it may indicate a faulty ECU. Difficulty Starting the Vehicle: During startup, the ECU is responsible for increasing the fuel injection volume. If the ECU is damaged, the concentration of the combustible air-fuel mixture may be too low, making it difficult to start the vehicle. Internal Program Disruption: Fuel injection volume, ignition timing, transmission shift logic, and other functions may be affected. If the vehicle experiences poor performance or fails to start, it's advisable to check the ECU for potential damage.
1
5
Share

What Causes One Side of the Jaguar Brake Light Not to Work?

One side of the Jaguar brake light not working is due to a burnt-out bulb or a blown brake light fuse. Below are the specific reasons why the brake light may stay on: Damaged Brake Switch: This is usually caused by poor contact between the brake pedal and the brake sensor switch or a faulty sensor switch. Worn or Aged Brake Pads: Worn or aged brake pads can also cause the brake light to stay on. It is necessary to check the thickness of the brake pads. If the thickness is below the specified value, typically 0.8cm, there is a high risk of the pads cracking while driving, which can be dangerous. Low Brake Fluid: Low brake fluid is often accompanied by noticeably reduced braking power, and in severe cases, a complete loss of braking force. This issue can be resolved by promptly refilling the brake fluid. Insufficient brake fluid causes the brake pedal to sink, keeping the brake switch continuously powered, which results in the brake light staying on.
2
5
Share

What is the original headlight bulb for the 2016 Emgrand GS?

Geely Emgrand GS uses HB3 dual-function bulbs for its high and low beams, with a power rating of 60W. Automotive headlights: Also known as car headlamps or LED daytime running lights, they serve as the "eyes" of a vehicle. They not only affect the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. Halogen headlights: Among automotive headlights, laser headlights are the brightest, followed by xenon and LED lights, with halogen being the dimmest. A 55W halogen bulb produces about 1000 lumens, and despite being a mature technology, there's little room for improvement in brightness. A typical 35W xenon lamp produces around 3500 lumens, approximately 100 lumens per watt. A standard 35W LED light produces about 3200 lumens, roughly 91 lumens per watt. Laser headlights, with 170 lumens per watt, are the brightest car lights available. The above figures represent general industry standards.
8
0
Share

What is the suitable tire pressure for Audi A6 in summer?

Audi A6's summer tire pressure is more suitable at 2.2bar. For roads with large bumps: On roads with large bumps, it is appropriate to reduce the tire pressure by 0.1-0.2bar from the standard tire pressure. For long-distance high-speed driving, the tire pressure should not be too low. It is advisable to increase the tire pressure by about 0.2bar from the lower limit of the standard tire pressure. New and old tires: For new tires, the pressure can be increased by about 0.2bar from the standard tire pressure. For old tires, it is appropriate to reduce the tire pressure according to the standard. If the wear is severe, follow the lower limit of the standard tire pressure. Summer and winter: In winter, the tire pressure can be increased by about 0.2bar based on the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.
11
3
Share

Can You Still Drive If the Transmission Is Broken?

If the transmission is broken, you should not continue driving. The function of the transmission is to change the speed of the vehicle and the torque on the driving wheels, as well as to enable reverse driving. The transmission is equipped with input and output shaft sensors, which are primarily responsible for gear shifting. If the transmission malfunctions, it will affect the normal shifting process. Continuing to drive with a faulty transmission may result in the gears slipping into neutral, sudden jamming, or the locking of the driving wheels, leading to accidents and severe damage. Inside the transmission, there are gears and bearing components in motion. Even a small damaged part can trigger a serious chain reaction, potentially causing the entire transmission to fail or even break the transmission housing.
3
0
Share

What kind of oil is used in the Honda K24Z1 engine?

Honda K24Z1 engine uses 5W-20 oil. The specific functions of the oil are as follows: Shock absorption: When the pressure at the cylinder port of the engine rises sharply, the load on the piston, piston pin, connecting rod, and crankshaft bearings suddenly increases. This load is transmitted and lubricated through the bearings, providing a cushioning effect against the impact load. Rust and corrosion prevention: The lubricating oil can adhere to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. Lubrication and friction reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear on the parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, reducing wear. Cooling: The oil can carry heat back to the oil tank and then dissipate it into the air, helping the radiator to cool the engine.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.