Can a C2 driver's license drive a car with manual-automatic transmission?

Will insufficient spare tire pressure trigger a tire pressure warning?

Insufficient spare tire pressure can trigger a tire pressure warning. Generally, the system will alert when the pressure falls below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Solutions for insufficient tire pressure: If no visible damage is detected, simply inflate the tire to the normal pressure and reset the tire pressure system; If inspection reveals a puncture, drive to a tire shop promptly for repair, then reinflate the tire; If the low-pressure warning reappears after inflation without any puncture, it might be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and replace it if necessary.

11

1

Share

Are 22 to 25 the Same Model of Thread Rolling Wheel?

22 to 25 are the same model of thread rolling wheel, and you just need to adjust the stripping gear. 1. Differences in Thread Rolling Wheels: The main distinctions among construction thread rolling wheels are the pitch, the thread angle, and whether they are numbered wheels or single-piece wheels. Numbered wheels have numbers 1, 2, 3 or one dot, two dots, three dots engraved on the three wheels respectively. For 16-22 rebar couplers, the national standard requires thread rolling wheels with a 2.5 pitch, while for rebar couplers above 25, a 3.0 pitch thread rolling wheel is needed. 2. Precautions: The thread rolling machine has poor precision, significant vibration, or operates abnormally; the thread rolling dies are misaligned, causing axial displacement of the rolled part, subjecting the threads to both shear and compressive stresses; the dimensions of the rolled thread blanks are uneven, and the surface is not cleaned properly, containing grinding dust, oxide scale, and dirt.

19

0

Share

How many cylinders does the Dongfeng Fengshen Yixuan use?

Dongfeng Fengshen Yixuan is equipped with a turbocharged engine independently developed by Dongfeng Fengshen, available in two displacements: 1.5T and 1.0T. The 1.0T turbocharged three-cylinder engine has a maximum power of 92 kW, a maximum horsepower of 125 PS, and a peak torque of 196 Nm. Here is the relevant introduction of Dongfeng Fengshen Yixuan: 1. Exterior: The Yixuan's design adopts Dongfeng's past family-style front face, while the rear features a more aggressive full-width taillight design. Both the front and rear are decorated with large, sharp chrome trim strips, which appear slightly abrupt. The Yixuan's styling is very similar to that of the Dongfeng Honda Civic, especially the recessed part of the front grille and the window line design of the C-pillar, which closely resemble those of the Civic. 2. Dimensions: The new car measures 4660/1812/1490 mm in length, width, and height, with a wheelbase of 2680 mm.

4

3

Share

How to Clear the Tire Pressure Abnormal Indicator Light on Volkswagen Tiguan?

Methods to clear the tire pressure abnormal indicator light on Volkswagen Tiguan: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the fault light on the dashboard will go out, completing the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It uses a wireless transmitter to send pressure information from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the speed differences between the tires, the purpose of monitoring tire pressure is achieved. Tire Pressure Monitoring System (TPMS) Introduction: It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and a 4-wheel indirect system.

15

2

Share

Where is the audio adjustment button for the 10th-generation Accord?

The audio adjustment button for the 10th-generation Accord is the 'Sound' button located on the center control panel. Below are the detailed specifications of the Accord: 1. Vehicle Positioning: The Honda Accord is a mid-size sedan under GAC Honda, available in both gasoline and hybrid versions. It has a length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. 2. Configuration: The Accord emphasizes safety performance, featuring a standard VSA system and front seat side airbags. 3. Powertrain: The Accord is equipped with i-VTEC and VTEC engines. The i-VTEC engine combines Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology with VTC (Variable Timing Control) technology, which continuously adjusts the valve timing across different engine speeds. This results in strong torque output and sharp acceleration performance. Through the ECU (Electronic Control Unit), the opening and closing of the intake and exhaust valves are precisely controlled to maintain optimal combustion, achieving an ideal balance of high power output, low fuel consumption, and clean emissions.

10

2

Share

Do I Need to Pay for Car Repairs Out of Pocket When Using Insurance?

Vehicle owners are required to make an advance payment for repairs and then settle with the insurance company. Below are the specific details for filing an insurance claim: 1. Important Notes: After an accident occurs, immediately call your insurance company. If the accident involves injuries, it is also necessary to notify the traffic police department to determine liability on-site; otherwise, the insurance company will not provide compensation. When the insurance company personnel arrive at the scene, the vehicle owner should present the insurance policy, driver's license, vehicle registration, and ID card. 2. Photographic Evidence: Whether photographs are required for car insurance claims depends mainly on the type of coverage purchased by the owner. For example, for claims involving vehicle damage, scratches, or glass coverage, photographic proof is necessary to show that the vehicle had no pre-existing damage before the policy was in effect. Six photos are required: one from each of the four 45° angles (front left, rear left, front right, rear right), one of the vehicle identification number (VIN), and one with the owner standing next to the vehicle. Each photo must include that day's newspaper, clearly showing the date.

18

0

Share

Can a C2 driver's license drive a car with manual-automatic transmission?

Will insufficient spare tire pressure trigger a tire pressure warning?

Are 22 to 25 the Same Model of Thread Rolling Wheel?

How many cylinders does the Dongfeng Fengshen Yixuan use?

How to Clear the Tire Pressure Abnormal Indicator Light on Volkswagen Tiguan?

Where is the audio adjustment button for the 10th-generation Accord?

Do I Need to Pay for Car Repairs Out of Pocket When Using Insurance?

Why is there a delay in starting the Cadillac CT6?

What Causes a BMW Steering Wheel to Become Hard to Turn?

Which country is the George Patton off-road vehicle from?

Where is the button to set the horn sound when locking the 14th-generation Sylphy?