Can a C1 License Drive Automatic Transmission Vehicles?

1 Answers
Lucille
07/30/25 12:22am
C1 license holders can drive automatic transmission vehicles. The vehicle types permitted under a C1 license include small and mini automatic transmission passenger vehicles, as well as light and mini automatic transmission cargo vehicles. Additionally, they can operate specialized mini, small, and light-duty vehicles. A C2 license allows driving small and mini automatic transmission passenger vehicles, and light and mini automatic transmission cargo vehicles. A C3 license permits driving low-speed cargo vehicles, while a C4 license is for three-wheeled vehicles. A C1 license covers all vehicle types permitted under C2, C3, C4, and C5 licenses, meaning obtaining a C1 license essentially grants permission to drive all vehicle categories under class C. A motor vehicle driving license is a legal document issued by the administrative authorities, certifying that the holder has learned and mastered traffic regulations and driving skills, passed the required tests, and is legally permitted to drive specific types of motor vehicles.
Was this review help?
13
3
Share
More Forum Discussions

How many seconds does the Volkswagen Lavida take to accelerate from 0 to 100 km/h?

The Volkswagen Lavida takes 13 seconds to accelerate from 0 to 100 km/h. Specific times: The manual transmission 1.5L model takes 12.1 seconds to accelerate from 0 to 100 km/h, while the automatic transmission 1.5L model takes 14 seconds. The 1.2T model takes 11.6 seconds, and the 1.4T model takes 8.3 seconds. New Lavida engines: They are a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine. The 1.2-liter turbocharged engine has 116 horsepower and a maximum torque of 200 Nm, with maximum power output at 5000 rpm and maximum torque output between 2000 and 3500 rpm. The 1.4-liter turbocharged engine has 150 horsepower and a maximum torque of 250 Nm, with maximum power output at 5000 rpm and maximum torque output between 1750 and 3000 rpm. The 1.5-liter naturally aspirated engine has 113 horsepower and a maximum torque of 145 Nm, with maximum power output at 6000 rpm and maximum torque output at 3900 rpm.
16
1
Share

What to Do When the Cruze Trunk Lock Won't Open?

There is an emergency escape switch above the trunk lock; pulling it down will open the trunk. Here are some details about the Cruze trunk: 1. The Cruze trunk door is remotely controlled. Press and hold the trunk unlock button on the remote to open the trunk. If the remote doesn't work, it might be due to a dead battery in the remote key; replacing the battery should solve the issue. 2. If the remote can open the trunk but manual operation fails, this is likely because the trunk door lock switch is damaged. 3. The issue might also be caused by rainwater entering and corroding the trunk switch. You can visit a 4S store to replace the door lock, which is free of charge during the warranty period.
2
4
Share

What Causes Water Leakage in the Car Trunk?

Water leakage in the car trunk may be due to trunk deformation or damaged seals. Here is information about trunk water leakage: 1. Drainage and Inspection: After water enters the trunk, it should be drained as soon as possible. Then locate the leak, inspect the trunk lid for deformation, check if the surrounding seals are intact, or observe where light passes through, and mark the spots. 2. Common Causes of Leakage: Whether there is an issue with the tail light seal, if there is leakage at the rear windshield seal, if the seals are cracked, if there are blocked drainage holes near the seals, or if there is aging or cracked sheet metal, etc.
19
3
Share

What Causes a Short Circuit in the High-Pressure End of the BMW N55 Fuel Injector?

BMW N55 fuel injector high-pressure end short circuit is caused by carbon deposits. Fuel Injector: Modern automotive fuel injectors are essentially simple solenoid valves. When the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection port. Fuel is then sprayed at high speed through the annular gap between the needle valve's tip and the injection port, forming a fine mist that facilitates complete combustion. Troubleshooting: If the injection port is clogged, it can be cleared using a cleaning needle, followed by thorough cleaning. Poor contact between the large flat surface of the needle valve body and the injector body, or significant wear on the needle valve's cylindrical surface. If the large flat surface of the needle valve body does not contact the injector body properly, apply chromium oxide to a flat plate and perform figure-8 grinding. If the needle valve's cylindrical surface is heavily worn, replace the needle valve assembly in pairs. Poor sealing between the needle valve and its body can lead to poor atomization or dripping. If air is present, simply purge the air from the fuel line. For poor fuel supply, inspect and repair the fuel transfer pump. If the fuel line connector leaks, ensure it is properly sealed. Insufficient spring tension or a broken piston spring requires spring replacement. If piston wear affects fuel supply, replace the piston.
20
5
Share

Can I Use Tap Water for Windshield Wipers?

Here is a brief introduction to the functions of windshield wipers: 1. Help the vehicle maintain a safe distance from the centerline of the left lane. 2. Assist the driver in determining the position of the left wheels. 3. Aid in judging the position of the right wheels. The following is an introduction to windshield wipers: 1: The principle of windshield wipers is that the motor drives the output shaft through the worm gear on the armature shaft, controlling the idler gear and idler shaft to drive the output gear, thereby achieving the effect of the output shaft operating the wiper linkage output arm. When the motor rotates, the output arm and linkage are driven to move back and forth. 2: Windshield wipers are blade structures installed in front of the windshield, consisting of a motor, reducer, four-bar linkage mechanism, wiper arm spindle, and wiper blade assembly.
12
2
Share

What is the ground clearance of the Volkswagen Lamando?

" The ground clearance of the Lamando is 114 millimeters. The ground clearance of the Lamando refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Lamando, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The design of the Lamando began in 2009. Its dimensions are 4615 mm in length, 1826 mm in width, and 1425 mm in height, with a wheelbase of 2656 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Lamando is not static; it depends on the load condition. Therefore, changes in ground clearance should be considered based on the Lamando's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage. "
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.