Can a C1 License Drive an RV?

2 Answers
ColemanLee
07/24/25 11:32pm
Whether a C1 license can drive an RV depends on the situation: 1. If the RV is less than 6 meters in length and seats fewer than 9 people, a C1 license is sufficient; 2. If the RV exceeds 6 meters in length, a C1 license is not permitted. The vehicle types permitted under a C1 license include: 1. Small and mini passenger vehicles; 2. Light and mini cargo vehicles; 3. Light, small, and mini special-purpose vehicles. Requirements for vehicles driven with a C1 license: light general cargo vehicles with a length not less than 5 meters, small general passenger vehicles with a length not less than 4 meters, or cars with a length not less than 4 meters. The full name of the driver's license is the motor vehicle driving license, and the permission to drive a vehicle is granted through the issuance of the license, indicating that obtaining a driver's license is a formal procedure that must be issued by a specialized authority.
Was this review help?
6
5
Share
SanBrantley
08/10/25 3:25pm
The C1 driver's license is primarily for small vehicles, and whether you can drive an RV depends on the specific type. If you have a C1 license, driving a small motorhome is usually fine, as long as the total weight is under 4.5 tons and the seating capacity doesn't exceed 9, including the driver. I've driven such vehicles many times, and they feel quite similar to sedans, with easy handling. However, if the RV is too heavy or has too many seats, you'll need a B1 or higher license, or you risk being penalized by traffic police. Additionally, towable RVs are entirely different—they require an additional C6 license or training and testing. Before buying, check the parameters on the vehicle registration certificate, and consult the dealer or local DMV if unsure, to avoid fines from uninformed driving. In short, most small RVs are C1-compatible, but verifying size and safety beforehand is essential.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the ground clearance of the Jetta VS5?

The ground clearance of the Jetta VS5 is 155mm under full load and 185mm under no load. The following is a description of the chassis: 1. It consists of four parts: the transmission system, the running system, the steering system, and the braking system. 2. It supports and installs the car engine and its various components and assemblies, forming the overall shape of the car and bearing the engine power. The following is an introduction to the Jetta VS5's body: 1. Dimensions: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm. 2. Exterior: The Jetta has a strong Volkswagen family style. 3. Interior: Hard plastic materials are mostly used, and the layout of the center console is neat and tidy, exuding a strong Volkswagen vibe. 4. Features: The Jetta VS5 is also equipped with front seat heating, a central control LCD screen, an 8-inch central control LCD screen, Apple CarPlay, and other configurations. 5. Power: The Jetta VS5 is equipped with the EA211 series 1.4T turbocharged engine, with a maximum power of 110kW (150PS) and a peak torque of 250Nm.
18
4
Share

Where is the Ford Ecosport fuse box located?

The Ford Ecosport fuse box is located on the right side of the front passenger seat. You can access it by prying off the cover panel, and the fuse box cover has markings. The vehicle's manual provides a detailed description of the purpose of each fuse inside the box. A fuse box, also known as a fuse holder, is designed for easy installation of fuses and may feature properties like waterproofing, fire resistance, and high-temperature resistance. The Ford Ecosport is the first compact SUV under Changan Ford, with dimensions of 4345mm in length, 1785mm in width, and 1659mm in height. It is equipped with either a 1.5L naturally aspirated engine or a 1.0T turbocharged engine, and a total of six models have been released.
1
2
Share

How to disassemble the Kia K5 key?

Kia K5 key disassembly steps are as follows: 1. Remove the mechanical key. 2. Use a flat-head screwdriver to pry open a small gap from the side seam of the key, then gradually open the seam along the initial gap. Insert your fingernail into the middle seam of the remote, gently squeeze and pry outward with slight force. Note: Once one side is slightly opened, proceed to pry from the other side until it's fully opened. 3. Use the flat-head screwdriver to remove the old battery and insert the new one. Note: The positive (+) side of the battery should face downward. Then reinstall the circuit board into place, align the key cover correctly, and press firmly with your hand. After securing, check the seam size to ensure it's not too wide, and the process is complete.
2
3
Share

Where is the Car Battery Switch Located?

There is no switch for the car battery. The car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. It is primarily made of lead and its oxides, with a sulfuric acid solution as the electrolyte. The normal service life of a car battery generally ranges from 1 to 8 years, depending largely on the condition of the vehicle. The battery is sensitive to low temperatures; in cold environments, its capacity is much lower than at room temperature, so timely inspection and maintenance are necessary. In daily life, it is advisable to avoid parking the car in open parking lots for extended periods. If long-term parking is unavoidable, the battery should be removed and taken away to prevent freezing and damage.
3
0
Share

Where to Add Windshield Washer Fluid for the Levin?

For the Levin, the windshield washer fluid is added through a black cap located next to the expansion tank. The cap for adding windshield washer fluid features a logo—a fan shape with water spraying out from below. If you see this logo on the cap, it indicates the windshield washer fluid filler port. Windshield washer fluid is commonly used by many car owners for cleaning the windshield. The Levin is a compact sedan under Toyota, available in both gasoline and hybrid versions, with body dimensions of 4640mm in length, 1780mm in width, 1455mm in height, and a wheelbase of 2700mm.
8
4
Share

How to Prevent Car Battery from Dying When Not Driving for a Long Time?

Methods to prevent car battery from dying when not driving for a long time: You can remove the car battery and store it in a cool, dry place. If you don't want to remove the entire battery, at least disconnect the negative terminal. It is recommended to start the car once every two weeks or let it idle in place. If the vehicle is parked for more than five days, the negative terminal of the battery should be disconnected. In principle, a car parked for more than 15 days is considered long-term parking. A completely dead battery not only prevents the engine from starting but may also cause the loss or reset of the car computer data, failure of window lifters, and locking of the anti-theft system. If conditions allow, try to let the car idle in place for 10 to 20 minutes to ensure the battery does not lose charge.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.