Can a C1 License Drive Agricultural Vehicles?

1 Answers
OLevi
07/29/25 11:11pm
Holding a C1 driver's license allows you to drive agricultural vehicles. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," a C1 license permits driving the following vehicles: small and micro passenger vehicles, as well as light and micro trucks; light, small, and micro special-purpose vehicles; small passenger vehicles with 9 or fewer seats. A C1 license can also drive vehicles classified under C2, C3, and C4 models. Permitted vehicle types for C1 license: The scope of a C1 driver's license includes small and micro passenger vehicles, light and micro trucks; light, small, and micro special operation vehicles; small passenger vehicles with 9 or fewer occupants. Vehicles that a C1 license cannot drive: Large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
14
4
Share
More Forum Discussions

Where to Inspect a Motorcycle?

Motorcycles should undergo annual inspection at the vehicle management office in the registration location, which is where the license plate was issued. The motorcycle inspection process is as follows: Go to the nearest inspection station: Drive the vehicle to the nearest inspection station. Appearance inspection: Undergo a vehicle appearance inspection, cooperate with staff to fill out the motor vehicle appearance registration form, and take photos. Fee payment and information registration: Proceed with fee payment and information logging. Online inspection: Undergo motor vehicle online inspection. Receive inspection pass sticker: Collect the inspection pass sticker. The vehicle management office should confirm the motor vehicle, review submitted documents and certificates, and issue the inspection pass sticker within one day from the date of acceptance.
2
0
Share

Why can't the motorcycle go faster than 60 km/h?

Here are the reasons why a motorcycle cannot reach high speeds: Exhaust pipe blockage: The exhaust pipe is clogged with carbon deposits and dirt, or the front bend of the exhaust pipe is dented. Such motorcycles perform fine at low speeds but cannot reach high speeds. Repair method: Disassemble the exhaust pipe and use a drain cleaning auger or a drill with a steel wire rope to scrape off the internal carbon deposits. Alternatively, burn off the carbon deposits with high-temperature fire. Air filter blockage: The rubber pipe is bent and obstructs airflow, or the foam inside the air filter is clogged with dust, leading to severe fuel-rich conditions due to restricted air intake. Repair method: Adjust the intake pipe and clean the foam inside the air filter. If the air filter is functioning properly, adjust the carburetor to prevent excessive fuel richness.
17
3
Share

How to Drive a Manual Transmission Car During the Break-in Period?

When driving a new manual transmission car during the break-in period, avoid frequently depressing the clutch, do not blindly pursue high gears, and ensure swift gear shifting and clutch operation. Below are relevant details: 1. For the first 100 kilometers, the new brake pads have not yet achieved 100% braking efficiency. Allow extra braking distance, especially within the first 200 kilometers, as tire friction is insufficient, requiring more force than usual when braking. Within the first 500 kilometers, new tires have not reached optimal traction, so avoid emergency braking during sharp turns whenever possible. 2. During the first 2,500 kilometers, drive gently, keeping speed below 100 km/h and engine RPM under 2,500. Between 2,500-3,500 kilometers, once the engine reaches operating temperature (coolant temperature gauge at mid-scale), you may gradually increase to maximum speed or engine RPM.
18
1
Share

How long after expiration can a motorcycle still pass its annual inspection?

Motorcycle annual inspections expire after four years. Motor vehicles are required to undergo safety technical inspections according to the following periods: Commercial passenger vehicles: Within 5 years: annual inspection once per year. After 5 years: inspection every 6 months. Trucks and large/medium non-commercial passenger vehicles: Within 10 years: annual inspection once per year. After 10 years: inspection every 6 months. Small/mini non-commercial passenger vehicles: Within 6 years: inspection every 2 years. After 6 years: annual inspection once per year. After 15 years: inspection every 6 months. Motorcycles: Within 4 years: inspection every 2 years. After 4 years: annual inspection once per year.
14
2
Share

Can Points Be Deducted Again After Clearing 23 Points?

Points cannot be deducted again within the current scoring cycle. Precautions regarding driver's license point deductions are as follows: Points less than 12 will be cleared in the next scoring cycle: If the points deducted within a scoring cycle (12 months from the initial issuance date of the driver's license) are less than 12, only payment is required without further processing. At the start of the next scoring cycle, the vehicle management computer system will clear all points from the previous cycle. If points reach 12, study and passing an exam are required before the license can be used again: If the points deducted within a scoring cycle reach 12, the driver must go to the issuing vehicle management office or the office where the violation occurred to study and pass the subject one exam. Only then can the full-point record be cleared and the normal use of the driver's license be restored.
7
0
Share

Does applying a motorcycle wrap require registration?

Applying a transparent wrap film does not require registration. However, if you are applying a color-changing wrap film, you need to register it at the vehicle management office. Here is some relevant information about wraps: Functions of wraps: The main functions of wraps are to protect against dust, intense sunlight, rain, and corrosion. Wraps provide excellent protection for vehicles. They effectively prevent harsh weather conditions from damaging the car's paint. Another benefit is preventing scratches from others. Precautions: When covering your vehicle with a wrap, it is best to wait until the vehicle has completely cooled down before proceeding. After driving, the vehicle's temperature does not drop instantly. Covering it with a wrap can cause localized temperature increases, leading to higher humidity and restricted air circulation inside the wrap.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.