Can a C1 driver's license drive a right-hand drive car in Hong Kong?

1 Answers
LaJayla
07/29/25 9:03pm
C1 driver's license can drive a right-hand drive car in Hong Kong, but it cannot be driven directly. You need to apply for a Hong Kong driver's license before you can drive. Applying for a driver's license is also relatively convenient. You need to obtain an application form from the Hong Kong Transport Department and then pay the relevant fees to drive a vehicle in Hong Kong. You can also apply through an agent. C1 motor vehicle driver's license is one of the codes for motor vehicle driver's licenses. The driving level of a C1 motor vehicle driver's license includes all the permitted driving models of C2, C3, and C4. It can drive mini passenger cars, light and mini trucks, light, small, and mini special operation vehicles, and other related models. Age requirements for applying for a driver's license: Applicants for small cars, small automatic transmission cars, and light motorcycles must be between 18 and 70 years old; applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old; applicants for city buses, medium-sized buses, large trucks, trolleybuses, or trams must be between 21 and 50 years old; applicants for tractor driving models must be between 24 and 50 years old; applicants for large passenger car driving models must be between 26 and 50 years old.
Was this review help?
10
5
Share
More Forum Discussions

What Components Make Up the Automotive Transmission System?

The components of an automotive transmission system include the gearbox, main drive shaft, intermediate support bearing, front and rear axles, and wheel differential. The primary function of the transmission system is to transfer the power generated by the engine to the vehicle's driving wheels, thereby generating driving force and enabling the vehicle to travel at a certain speed. Off-road vehicles typically employ four-wheel drive, which necessitates the addition of a transfer case in the transmission system. The gearbox is responsible for changing the direction, speed, and torque of the vehicle. The main drive shaft transmits the force from the drive shaft to the left and right wheels via the differential. The intermediate support bearing serves as a support point for the drive shaft, cushioning the impact of uneven road surfaces. The front and rear axles convert the mechanical energy from the engine into kinetic energy to propel the vehicle. The wheel differential distributes power to both half-shafts while allowing them to rotate at different speeds, ensuring that the wheels can travel unequal distances in a pure rolling motion. The transfer case is a gear transmission system whose input shaft is directly or indirectly connected to the second shaft of the gearbox via a universal drive device, with multiple output shafts connected to each drive axle through respective drive mechanisms.
20
2
Share

What are the differences between the Mercedes-Benz A180 and A200?

The differences between the Mercedes-Benz A180 and A200 are reflected in three aspects: exterior lighting, tires, and engine. The Mercedes-Benz A-Class is a compact sedan under the Mercedes-Benz brand, also serving as the entry-level model in the lineup. The dimensions of the A-Class are 4622 mm in length, 1796 mm in width, and 1454 mm in height, with a wheelbase of 2789 mm. Below are the detailed differences: 1. Exterior Lighting: The Mercedes-Benz A200 features additional Xenon headlights, daytime running lights, and ambient interior lighting compared to the A180. 2. Tires: The A200 comes with 17-inch alloy wheels and tires that are 225 mm wide with an aspect ratio of 45; the A180 uses 16-inch alloy wheels with 205/55R16 tires. 3. Engine: The A180 is equipped with a low-power version of the 1.3-liter turbocharged engine, while the A200 uses a high-power version of the same 1.3-liter turbocharged engine.
16
2
Share

How to install the rear seat cushion of Haval H6?

The installation method for the rear seat cushion of Haval H6 is as follows: 1. Remove the rear seat headrest, place the seat back cover over the backrest, secure the top of the seat cover with hooks, and fix the bottom by inserting the seat cushion clamp into the gap between the backrest and the seat cushion; 2. Place the seat cushion cover over the rear seat cushion and secure it again by inserting the seat cushion clamp into the gap between the backrest and the seat cushion; 3. Reinstall the rear seat headrest and cover it with the headrest cover, securing it with buckles. Taking the 2021 Haval H6 as an example, it is a compact SUV with body dimensions of 4653mm in length, 1886mm in width, 1730mm in height, a wheelbase of 2738mm, and a body weight of 1675kg.
17
3
Share

Where is the cabin air filter located in the Renault Fluence?

The cabin air filter in the Renault Fluence is located inside the glove compartment on the passenger side. The cabin air filter tends to accumulate a lot of dust, and you can use tools like a blower or high-pressure air gun to remove the loose dust. Taking the 2015 Renault Fluence as an example, it belongs to the compact car category with body dimensions of 4618mm in length, 1813mm in width, and 1488mm in height, a wheelbase of 2702mm, a fuel tank capacity of 60 liters, and a curb weight of 1402kg. The 2015 Renault Fluence features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 137 PS, a maximum power of 101 kW, and a maximum torque of 191 Nm, paired with a continuously variable transmission (CVT).
8
0
Share

How to adjust the time on the Lavida dashboard?

The method to adjust the time on the Lavida dashboard is as follows: 1. Insert the key and start the car; 2. Press the time button, and when the time on the trip computer flashes, press the set button; 3. Press the set button once to adjust the time, or hold the set button to make the time digits jump quickly. Stop the jumping to complete the adjustment. Taking the 2019 Lavida as an example, it is a compact car with body dimensions of length 4613mm, width 1765mm, height 1460mm, a wheelbase of 2610mm, and a curb weight of 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, paired with a 5-speed manual transmission.
17
2
Share

What is Brake Maintenance?

Automotive brake maintenance refers to the regular inspection and upkeep of the braking system. Brake system maintenance can be performed in the following aspects: 1. High-temperature protection for brake pads: Prevents corrosion of the braking system, avoids brake pads from seizing due to high temperatures, eliminates brake squeal, and maintains good lubrication durability. Products containing ceramic components that can withstand temperatures above 1400°C are required. Therefore, it is essential to regularly check the thickness of the brake pads or shoes. Replace them immediately when their thickness approaches or falls below the manufacturer's specified minimum thickness. 2. Brake caliper lubrication maintenance: Lubricates the moving shafts and rubber cups of the brake calipers, keeps the caliper bushings soft, and extends the caliper's service life. Fully synthetic brake caliper lubricant is required. 3. Brake disc cleaning: Quickly cleans oil stains, dirt, and friction dust from brake discs, drums, and any components, ensuring good heat dissipation of the brake discs; eliminates harsh braking noises and promotes even braking. 4. Brake fluid replacement: Brake fluid has water-absorbing properties. If not replaced for a long time, it can corrode the braking system, posing a hazard to driving. It is generally recommended that owners replace the brake fluid every 20,000 kilometers, mainly to ensure the cleanliness of the brake fluid. 5. Anti-rust lubrication for tire screws, brake discs, and wheel contact surfaces: Prevents corrosion, avoids screws and surfaces from seizing due to heat, and facilitates disassembly. Products containing aluminum components that can withstand temperatures above 1100°C are required to ensure contact area with the brake pads and improve braking force.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.