Can a C1 Driver's License be Upgraded to A2?

How Long Can the Original Spark Plugs Last?

There is no fixed standard for how long the original spark plugs can last, and it cannot be determined by years. Generally, the lifespan of spark plugs is judged by the mileage driven. When the car reaches a certain mileage, the spark plugs need to be replaced. Original spark plugs typically last around 30,000 kilometers. The replacement mileage varies depending on the material of the spark plugs: ordinary copper-core spark plugs should be replaced at 30,000 kilometers; yttrium spark plugs at 50,000 kilometers; platinum spark plugs at 80,000 kilometers; iridium spark plugs at 100,000 kilometers; and platinum-iridium alloy spark plugs at 120,000 kilometers.

11

3

Share

What is the difference between the spare tire and the original tire of the Changan CS55?

The spare tire of the Changan CS55 has a slightly smaller diameter and width compared to the four original tires, so it can only be used as a temporary replacement. Additionally, it should only be used on non-driving wheels, with a maximum speed not exceeding 80 km/h and a driving distance not exceeding 100 km. Here are some relevant details about the Changan CS55: 1. In terms of interior design, the Changan CS55 follows a "refined" approach, featuring a three-spoke steering wheel and a symmetrical center console. The air vents, center control area, and red decorative strips on both sides of the center console highlight its "personalized" characteristics. 2. In terms of space, the dimensions of the new Changan CS55 are: length 4500mm, width 1855mm, height 1690mm, with a wheelbase of 2650mm.

5

Share

Is the accelerator on the left or right side in an automatic transmission car?

In an automatic transmission car, the accelerator is on the right side, while the brake is on the left, both controlled by the right foot. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission car has six gear positions, arranged from top to bottom as: P, R, N, D, S, and L. Automatic transmission cars usually employ a hydraulic transmission device to replace the mechanical clutch found in manual transmission cars, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the accelerator is pressed and the engine speed increases, the transmitted torque grows, enabling the car to move forward.

7

3

Share

What are the tips for using the S gear and L gear in the Vezel?

The tips for using the S gear and L gear in the Vezel are as follows: 1. The S gear is the sport mode. When the engine speed reaches 2500 rpm, engaging the S gear can enhance the vehicle's sporty performance, making it convenient for overtaking. 2. The L gear is a high gear ratio mode, suitable for climbing steep slopes or descending long steep slopes, such as underground garage passages leading to the second basement level. Its principle is similar to the first gear in a manual transmission, utilizing engine braking to reduce wear on the brake system. 3. The S gear can be used at any speed, while the L gear is a low-speed mode and can only be used at low speeds. Note: When in L gear, after climbing or descending a slope, promptly shift back to D gear. Otherwise, pressing the accelerator will not increase the vehicle's speed, and the engine may produce abnormal noises.

15

5

Share

What is the function of an oil-gas separator?

The function of an oil-gas separator is to separate the engine oil from the gases expelled by the crankcase, reducing the amount of oil emitted from the crankcase breather to the outside of the engine. When the oil-gas separator is functioning properly, it only draws in exhaust gases and not oil. If the oil-gas separator malfunctions, it loses its ability to separate oil from gas, drawing in oil along with the gases. This can cause oil to enter the intake tract and combustion chamber, leading to oil burning. A faulty oil-gas separator may also prevent the turbocharger from engaging, resulting in poor acceleration due to the turbocharger's inability to function correctly. It is essential to repair a faulty oil-gas separator promptly. If left unrepaired, it may initially only cause oil burning, but prolonged neglect can lead to engine knocking and, in severe cases, complete engine failure.

1

0

Share

What engine does the Swift use?

Swift is equipped with two engines: a 1.3L naturally aspirated engine and a 1.5L naturally aspirated engine. The 1.3L naturally aspirated engine delivers a maximum power of 67kW and a peak torque of 115Nm, with maximum power achieved at 6,000 rpm and peak torque available between 2,500 to 3,500 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Swift is a compact car launched by Changan Suzuki, boasting a stylish and attractive exterior design with smooth and rounded front lines, flowing waistlines, and a fashionable yet sophisticated interior. It offers abundant features and provides excellent front-row and headroom space, ensuring a relatively spacious cabin.

17

5

Share

Can a C1 Driver's License be Upgraded to A2?

How Long Can the Original Spark Plugs Last?

What is the difference between the spare tire and the original tire of the Changan CS55?

Is the accelerator on the left or right side in an automatic transmission car?

What are the tips for using the S gear and L gear in the Vezel?

What is the function of an oil-gas separator?

What engine does the Swift use?

Has the Buick Excelle Been Discontinued?

How to Apply for ETC for Family Cars?

How to Solve the Power Steering Failure of Cruze?

How to Turn Off Auto Start-Stop on the Malibu XL?