···
Log in / Register

Can a Bulging Tire Sidewall Still Be Used?

4 Answers
SanLevi
09/03/25 4:21am

If the sidewall of a vehicle's tire is bulging, it can no longer be used and must be replaced as soon as possible. High-speed driving should also be avoided. The bulging of a tire sidewall is primarily related to individual driving habits, such as taking corners too fast or parking at an angle with excessive speed, which can cause the tire sidewall to impact curbs or other obstacles. Below are some precautions for tire usage: 1. Increase awareness of tire safety. Regularly inspect tires, especially before highway driving, ensuring thorough and detailed checks. In addition to tire pressure, observe the sidewalls for cracks and check the tread wear condition. Address any potential hazards promptly. 2. Regularly adjust wheel balance. If wheel balance exceeds standards, high-frequency vibrations will occur during high-speed driving, leading to uneven tire wear and compromising driving safety. After tire repairs, dynamic balance testing and adjustments should be performed. The dynamic balance test value for a single side of the tire should be less than or equal to 40 grams. 3. Rotate tires periodically. To ensure even wear across all tires on the same vehicle, perform tire rotation every 5,000 kilometers and wheel alignment every 5,000 to 10,000 kilometers to prevent abnormal or excessive wear. Do not install tires of different models or with significant differences in wear on the same axle.

Was this review help?
11
0
Share
McKinsley
09/15/25 5:57am

I've experienced tire bulging before. During a road trip last year, a bulge appeared on the left front tire. I didn't pay attention to it at the time, but it resulted in a blowout three days later, nearly causing an accident. Bulging is a sign of broken internal tire cords, where air seeps in to form a bubble. This weak spot can rupture at any moment, especially during high-speed driving. A blowout can easily cause loss of vehicle control, particularly in rainy conditions or on highways, posing an extremely high risk of serious accidents. I strongly advise against taking the risk of continuing to use such tires—safety comes first. Cars can be repaired, but you can't gamble with lives. Additionally, regularly checking tire pressure and maintaining recommended levels can help reduce the frequency of bulging occurrences.

Was this review help?
2
5
Share
Expand All
TheoAnn
10/29/25 6:37am

If your tire has a bulge, throw it away and don't use it. Saving a small amount of money could cost you dearly. The internal damage from a bulge cannot be repaired, and continuing to drive on it may lead to a sudden blowout. If it really blows out, not only will you need to replace the tire, but it could also damage the wheel rim and suspension, doubling the repair costs. If it causes a crash, the losses will be even greater, not to mention the trouble of physical injuries. Spending money on a new tire will give you peace of mind, especially before long-distance drives—always check the tire sidewalls for any abnormalities. Since I often drive on bumpy roads, I opt for higher-quality tires that are more durable and worry-free.

Was this review help?
19
0
Share
Expand All
DiRachel
12/12/25 6:49am

Tire bulging is caused by internal cord breakage leading to structural damage, where the sidewall becomes too thin to restore strength. Air seeping in forms bubbles that are prone to rupture under pressure, especially during high-speed driving where heat buildup drastically increases the risk of a blowout. It is absolutely unsafe to continue using such tires and immediate replacement is strongly recommended. For maintenance, ensure stable tire pressure and avoid impacts from potholes or rough roads to minimize damage risks.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

How to distinguish imported Honda Free 50?

Domestic models are the cheapest; followed by parallel imported cars; the most expensive are regular imported cars. Parallel imported cars and imported cars have good quality and very complete configurations. Domestic cars, in order to cater to the tastes of domestic consumers and ensure cost, may have some reduced configurations.
19
2
Share

How to adjust the high and low beams of a motorcycle?

Loosen the two screws on the left and right sides of the headlight, then move the headlight up and down. The adjustment can also be made using the adjustment screws behind the headlight. There are usually two screws, one for adjusting the height and the other for adjusting the left-right position.
1
0
Share

How to Disassemble and Repair the Front Brake Pump of a Motorcycle?

Remove the half-shaft bolt, take out the half-shaft, lift the wheel, remove the hollow shaft bolt, and take out the half bearing together with the wheel; Remove the brake pads, disconnect the brake caliper hose, remove the brake pump, and then you can start the repair.
1
4
Share

How to Wire Additional Lights on a Motorcycle?

Take the charging wire (red/black), trigger wire (green/white), high-voltage coil input wire (yellow), or any one of the engine kill wires (black/white) and connect them in series with a switch. Connect in series with the positive battery input wire (red wire).
14
1
Share

How to Install a Chain?

Replace the worn-out old chain and cut the new chain to the same length as the old one. Place the chain on the largest chainring and the largest sprocket. For frames with rear suspension, position the rear suspension at the setting that requires the longest chain length.
5
5
Share

How to Check the Expiration Date of Motorcycle Insurance?

You can visit the official website of the insurance company and click on the corresponding link to check the relevant information about your motorcycle insurance. Alternatively, you can call the official customer service hotline of the insurance company, provide the necessary identity information for verification, and then proceed with the inquiry.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.