Can a Bulging Tire Sidewall Still Be Used?

1 Answers
LeSophia
07/29/25 8:56pm
Tires with bulging sidewalls should not continue to be used. Below are the functions of tires and precautions for their use: Functions of tires: Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power performance, braking performance, and passability; Work together with the vehicle suspension to cushion impacts during driving and dampen resulting vibrations. Precautions for tire use: Avoid rapid acceleration, emergency braking, or sharp turns; Avoid hitting curbs; Avoid parking on curbs; Avoid driving quickly on unpaved roads or surfaces with significant elevation differences.
Was this review help?
8
3
Share
More Forum Discussions

What to Do If Unable to Find Expired License for Renewal?

It does not affect the renewal process of an expired driver's license. As long as you can submit the required documents to the vehicle management office of the public security traffic police, you can obtain a new driver's license. If both the driver's license and the vehicle are lost, you can apply to the vehicle management authority of the public security traffic police where the driver's license was issued for both a replacement of the lost driver's license and a renewal of the driver's license.
4
1
Share

What to Do When the Engine Suddenly Stalls and Cannot Restart

When the engine suddenly stalls while driving and cannot be restarted, promptly pull over to check the cause of the stall. Immediately turn on the right turn signal, gradually slow down, and pull over to the side of the road. Retrieve the warning triangle and place it 50 meters behind the vehicle. Call for roadside assistance and wait for help.
3
0
Share

What is the appropriate position for adjusting the right side mirror?

When adjusting the right side mirror, it is important to minimize the visible space occupied by the sky. The horizon should be positioned at two-thirds of the mirror's height, and the edge of the car body should occupy one-fourth of the mirror's image. The specific adjustment method is as follows: First, sit in the driver's seat in your usual driving posture. Use the mirror control button to adjust the left mirror vertically until the sky and ground each occupy about half of the mirror. Then, adjust the mirror horizontally. Ensure that the rear of the car occupies about one-fourth of the mirror (try not to exceed one-fourth). The right side mirror can be adjusted using the same method as the left. This allows you to observe the driving path of distant vehicles behind you while also keeping track of the rear of your car when reversing. If you cannot see the rear wheels when reversing, you can purchase a pair of small convex mirrors and attach them to a suitable position on the side mirrors.
9
0
Share

What are the techniques and methods for practicing Subject 3?

The test uses in-car voice prompts for each step, and you must respond within ten seconds after hearing the instruction. When the speedometer needle points to 10, shift to 2nd gear; at 20, shift to 3rd gear; at 30, shift to 4th gear. Always remember to upshift when accelerating and downshift when decelerating. Immediately release the accelerator, fully depress the clutch pedal, and shift to second gear.
7
5
Share

How to Reset the Maintenance Light on a 2021 Geely Emgrand?

In idle state, press and hold the odometer reset button on the instrument panel for 2-3 seconds to turn off the maintenance reminder. After servicing, the maintenance technician at the service station will use a computer to access the vehicle system settings, and the maintenance reminder light will be turned off.
5
3
Share

How to Control the Clutch Well During Subject 2 Practice?

First, adjust the seat and rearview mirror, then fasten the seatbelt after getting into the car. Adjust the seat forward and backward. Press the clutch pedal all the way down with your left foot. When pressing the clutch, use the heel of your left foot as a pivot and press the clutch pedal with the ball of your foot. For the semi-engaged clutch operation, follow three steps: fast at first, then slow, and finally engage. The car body will shake, and the engine sound will become low and decrease.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.