Can a broken sunroof be closed manually?

What is the reason for diesel engine idling vibration but no vibration when accelerating?

Diesel engine idling vibration but no vibration when accelerating is caused by: the engine's idle excitation frequency couples with the natural frequency of the steering system or vehicle body, generating idle resonance which leads to vibration. When accelerating, the engine's excitation frequency changes and increases, avoiding the natural frequency points of the transmission system or certain vehicle body components, thus eliminating the vibration. It is quite normal for an engine to have slight vibration during idling, as all engines exhibit this phenomenon. Under normal circumstances, it does not affect the driving and riding experience of vehicle owners, and no treatment is required. Only when the engine's idling vibration is excessive can it be considered a fault.

18

5

Share

How to Turn Off the Lights on a Toyota Camry?

Toyota Camry's light turning off method: Place the switch in the AUTO position, and the automatic headlight sensor will activate the headlights accordingly. When adjusted to AUTO mode, the headlights will automatically turn on when the driving environment becomes dark and turn off when it brightens. The Camry is a model under GAC Toyota, with the luxury version featuring a large trapezoidal horizontal grille, a streamlined body posture, a lower waistline, and an extended roof rear section that increases rear headroom. In terms of body dimensions, the Toyota Camry measures 4825mm in length, 1820mm in width, and 1485mm in height.

4

1

Share

How often should the brake fluid be changed for an Audi A4L?

Audi A4L brake fluid should generally be replaced every 20,000 kilometers or every two years. Over time, the rubber cups and pistons in the brake pump may wear out, causing the brake fluid to become contaminated, so it should be replaced promptly. The Audi A4L features a completely new exterior and chassis design, with the front and rear resembling the Audi A5. The interior of the Audi A4L continues the Audi family design, with exquisite craftsmanship and high-quality materials. A large number of parts shared with the A6L can be found on the dashboard. In terms of body dimensions, the Audi A4L measures 4761mm in length, 1826mm in width, and 1439mm in height.

3

Share

How to Turn Off the Engine Start-Stop Function in the Verano?

The Verano's automatic start-stop function has a dedicated switch button. Press it once to turn it off, and press it again to turn it on. The specific location of the button is next to the gear lever, where there are four small buttons. One of these buttons has the letter 'A' with 'OFF' beneath it—this is the switch to adjust the automatic start-stop function, with 'OFF' indicating the function is turned off. The engine start-stop technology automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and automatically restarts the engine when it's time to move forward again. The Verano is a compact car with body dimensions of 4718mm in length, 1802mm in width, and 1466mm in height.

19

2

Share

Is the headlight height of BYD Tang automatically adjustable?

The headlight height of BYD Tang is not automatically adjustable and requires manual adjustment. It can be adjusted using the adjustment knob located on the left side of the driver's dashboard. The BYD Tang is a dual-mode hybrid SUV, available in five models (Luxury, Elite, Prestige, Flagship, and Speed Edition). The BYD Tang comes standard with LED daytime running lights, HID xenon headlights, dual exhaust pipes, 18-inch two-tone alloy wheels, roof rack, and smart induction welcome lights. In terms of dimensions, the BYD Tang measures 4815mm in length, 1855mm in width, and 1720mm in height.

13

3

Share

Can ETC be transferred to another car?

ETC cannot be transferred to another car: ETC is dedicated to a specific vehicle. If both the vehicle and license plate are changed, the owner should first go to the bank to unbind the original ETC-linked bank card. If the new car needs to use ETC, a new ETC pass must be applied for. When passing through the highway, if the license plate number does not match the information in the card or the tag, passage will not be allowed; and the ETC will be added to the issuing bank's blacklist. The owner must bring their original ID card and vehicle registration certificate to the issuing bank's ETC service point to remove the ETC from the blacklist. If the car is changed but the license plate remains the same, simply take the ETC device to the service point, update the license plate number, engine number, and other information at the bank, and then reinstall it. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the owner must provide their valid ID card and vehicle registration certificate (original and photocopy). If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed. Applicants must be between 18 and 60 years old, and the car must be registered under their name. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rear windshield angle, which can reduce the driver's field of vision. If ETC is installed without considering this, it may increase blind spots. Install it behind the rearview mirror on the right side to avoid blocking the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, avoid installing it on the blackened area of the windshield or where the solar panel might be blocked. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple cars from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid paying for the car in front due to its faulty ETC device, maintain a distance of more than 10 meters from the car ahead. The ETC lane recognizes vehicles at a speed of 20 km/h. Driving too fast may result in failure to read the vehicle's device information, leading to failed toll deduction. If a debit card is linked to ETC, insufficient balance will also cause toll deduction to fail.

10

2

Share

Can a broken sunroof be closed manually?

What is the reason for diesel engine idling vibration but no vibration when accelerating?

How to Turn Off the Lights on a Toyota Camry?

How often should the brake fluid be changed for an Audi A4L?

How to Turn Off the Engine Start-Stop Function in the Verano?

Is the headlight height of BYD Tang automatically adjustable?

Can ETC be transferred to another car?

Does the Honda Civic Have a Hybrid Version?

What are the color options for the Volkswagen Sagitar?

Do Scooter Motorcycles Have a Clutch?

Is a Rearview Camera Enough Without a Parking Sensor?