Can a Brand New Car Drive on the Highway?

1 Answers
StRhett
07/30/25 7:58am
Brand new cars can drive on the highway. Here are some important precautions for driving on the highway: 1. Observe traffic rules and display a novice driver sign: Always follow traffic rules and display a novice driver sign at the rear of your car to alert other drivers. 2. Have an experienced driver accompany you: If it's your first time driving on the highway, it's best to have a driver with at least three years of experience or someone familiar with highway driving accompany you. 3. Inspect your vehicle before entering the highway: Before setting off, thoroughly inspect your vehicle, especially the tires, brakes, spare tire, water, oil, etc. 4. Pay attention to speed limits: Every highway has a minimum speed limit, so make sure not to drive below the minimum speed limit.
Was this review help?
12
2
Share
More Forum Discussions

Is the Start-Stop Function Useful?

The start-stop function is useful. Vehicles equipped with automatic start-stop have this function enabled by default. To turn off the automatic start-stop, simply press the start-stop button, and the dashboard will indicate that the system is off. To use this function again, press the button to reactivate it. Precautions for using automatic start-stop include: 1. When the engine stops, quickly shift to P gear and release the brake; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Allow the engine speed to drop to zero, engage the starter gear, and then restart; 5. Do not activate the automatic start-stop system during low-speed parking or when the air conditioning is on.
4
3
Share

How to Use the Car ESC?

Car ESC is generally a function that is enabled by default. It automatically activates during steering or sharp turns, primarily to make the car more stable and safe when changing lanes or navigating curves. More information about the ESC system is as follows: 1. Prerequisites for ESC system activation: Under normal driving conditions, the ESC system does not function. When the ignition switch is turned on, the ESC is enabled, the warning light illuminates, and when the ESC is turned off, the indicator light comes on and extinguishes after about 4 seconds. 2. Function of the ESC system: The ESC mainly controls the longitudinal and lateral stability of the vehicle to ensure stable driving. For example, when the car oversteers during a left turn on slippery roads (such as when the tail swings to the right or the sensors detect too abrupt a turn), it quickly brakes the right front wheel to restore traction, generating an opposite torque to keep the car in its original lane.
9
3
Share

How to use the M+ and M- in automatic transmission?

Usage methods of M+ and M- in automatic transmission: 1. Highway driving: On highways, drivers can manually shift to higher gears using M+ to maintain speeds between 80-100km/h; 2. Icy/snowy roads: Adjust to gear 2 using M+ to reduce wheel slippage; 3. Overtaking: Use M- to downshift, providing higher torque for instant acceleration; 4. Uphill driving: Employ M- on slopes as lower gears deliver stronger engine power. Automatic transmission refers to a vehicle's gear-shifting mechanism where the transmission control system automatically selects appropriate gears based on engine speed and load, replacing manual gear-shifting decisions.
5
3
Share

How to Refuel a Motorcycle?

To refuel a motorcycle, simply go to a gas station. Note that making phone calls and open flames are prohibited at gas stations. Below are some precautions to take when refueling at a gas station: 1. Remember that making phone calls and open flames are prohibited at gas stations. Fuel is highly flammable, and even a small spark can cause a safety hazard. Not only is smoking prohibited, but the use of matches or lighters is also forbidden. 2. Always turn off the engine at the gas station and wait for the staff to instruct you to refuel. You can also opt for self-service refueling. After paying, you will receive a barcode to scan. Proceed to the fuel dispenser, press the button to select the fuel type, scan the barcode, and then remove the nozzle to start refueling. If it's your first time and it feels complicated, you can ask the staff to demonstrate the process for you.
3
0
Share

What is the best way to clean an oxygen sensor?

Oxygen sensors can be cleaned. For mild dirt, carburetor cleaner can be used, while for severe dirt, a diluted sulfuric acid and ferric chloride solution is recommended. The specific cleaning steps for an oxygen sensor are as follows: 1. Prepare a cleaning solution using 5-10% ferric chloride solution mixed with excess hydrochloric acid. The exact ratio depends on the condition of the sensor's surface. Remove the oxygen sensor and soak it in the solution for 10-15 minutes. After soaking, rinse it thoroughly with water. Ensure that the four surrounding holes are clear, and when viewed from the bottom, the internal substrate should appear white after cleaning. 2. If the cleaning is not satisfactory, repeat the process until the white substrate becomes visible.
19
1
Share

Which is brighter, xenon headlights or halogen headlights?

Xenon headlights are brighter than halogen headlights. The luminous arc of xenon lamps is the same length and diameter as the tungsten filament of halogen lamps, but the brightness of xenon lamps is three times that of halogen lamps. Xenon lamps can produce 3200 lumens, while halogen lamps only produce 1000 lumens. However, in low-visibility weather such as rain or fog, halogen lamps have better penetration. Below is a detailed introduction to both: 1. Xenon lamps (HID), also known as high-intensity discharge lamps, work by increasing the 12V voltage to an ultra-high voltage of 23000V, which excites the xenon gas filled in the quartz tube to emit light. The voltage is then converted to about 85V to stably and continuously supply the xenon bulb with power. Additionally, HID lamps avoid the issue of halogen lamps, which tend to oxidize and dim over time. Xenon lamps provide a wide and long illumination distance. 2. Halogen lamps are essentially a special type of incandescent lamp. Their principle is based on the fact that when current passes through a resistor, it generates heat. When the temperature is high enough, it emits blackbody radiation in the visible light spectrum.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.