···
Log in / Register

Can a BJ80 Modified to Resemble a G-Class Be Registered?

1 Answers
DeSkylar
07/28/25 8:12am

BJ80 modified to resemble a G-Class cannot undergo the registration modification process. Vehicle modifications must not alter the registered structure of the vehicle or change the vehicle model type. The following circumstances will not be approved for modification registration: Changing the vehicle brand, etc.: Altering the brand, model, or engine type of the motor vehicle, except for engines that are optionally installed with permission from the competent department of motor vehicle products under the State Council. Changing the registered appearance of the vehicle: Modifying the registered appearance and technical data of the motor vehicle, unless otherwise stipulated by laws, regulations, or national mandatory standards.

Was this review help?
18
5
Share
More Forum Discussions

What is the function of engine mounts?

The function of engine mounts is to eliminate resonance generated during engine operation and reduce hydraulic oil pressure. Method for replacing automobile engine mounts: Use a jack to support the engine; open the hood, remove the air filter cover and pipes; remove the filter base; take out the old engine mounts and replace them with new ones. Functions of engine mounts: Eliminate resonance generated during engine operation; reduce hydraulic oil pressure. Once the mounts are damaged, significant resonance will occur between the engine and the frame, causing the vehicle body to shake and produce various abnormal noises. Generally, automobile engine mounts should be replaced every 6 years, but they must be replaced immediately once damaged.
16
3
Share

Are Old Tires Toxic When Stored Indoors?

Old tires stored indoors can be toxic. Aging of waste tires accelerates, and during the aging process, they release irritating gases that can irritate the respiratory tract, potentially leading to respiratory diseases. They also tend to breed mosquitoes and insects, spread diseases, and are prone to causing fires. Methods for disposing of old tires: Tire retreading is a technology that repairs and processes worn or otherwise damaged tires to restore their usability. Tire lifespan: The wear life of a tire is between 30,000 to 50,000 kilometers. If a tire hasn't reached the wear limit or mileage but has been in use for 5 years or has developed numerous cracks on the sidewall, it should be replaced.
20
3
Share

Is an Insurance Policy Required for Annual Vehicle Inspection?

An insurance policy is required for annual vehicle inspection. In regions where electronic insurance policies are implemented, there is no need to carry a paper policy as the inspection agency can verify the electronic insurance policy of the vehicle. Requirements for vehicle annual inspection: Before the inspection, ensure the vehicle's braking performance is in good condition, and replace the brake pads if necessary. The braking performance is one of the most critical indicators of vehicle safety and is a mandatory check during the inspection. Prior to the inspection, the braking system should be thoroughly checked. Brake fluid and brake pads are two key areas to focus on. Dirty brake fluid or high moisture content can result in soft braking, while excessively worn brake pads can lead to reduced braking force and unusual noises. After inspection, perform necessary maintenance on relevant parts to ensure the vehicle passes the inspection smoothly. Regulations related to vehicle annual inspection: Before applying, the vehicle owner must resolve all traffic violations and accidents involving the vehicle. When applying, the owner must fill out an application form and submit the vehicle registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and the vehicle safety technical inspection certificate.
14
4
Share

Where is the rearview mirror heating switch for the Roewe RX5 Plus?

The rearview mirror heating switch for the Roewe RX5 Plus is located in the button area below the central control screen. Control key for the rearview mirror heating function: The control key is a rotatable button with three positions corresponding to L, O, and R. There is a pattern of rising heat at the bottom. Rotate the button to this position to activate the rearview mirror heating function. This function helps keep the rearview mirrors clear when they fog up after rain, allowing the driver to indirectly see the rear and surrounding conditions clearly. It acts as a second pair of eyes, expanding the driver's field of vision and improving driving safety. Some cars have a knob on the driver's side door that adjusts the angles of the left and right rearview mirrors. Turning the knob to the left adjusts the left mirror, and turning it to the right adjusts the right mirror. When the knob is in the middle position, it activates the rearview mirror heating function automatically. Therefore, it is important to turn the knob to the left or right to prevent the heating function from staying on continuously, which could affect the lifespan of the heater. Notes: Not all cars are equipped with a rearview mirror heating function, so check whether your vehicle has this feature. Before using the rearview mirror heating, ensure the vehicle is in the ignition-on state or turn the key to the ON position to power the function. Importantly, do not use this function when the car battery is low on charge or malfunctioning. When the exterior rearview mirror heating is on, avoid touching the mirror surface.
2
3
Share

What Causes Transmission Fluid to Turn Yellow?

Transmission fluid, also known as gear oil, may turn yellow after some time of use due to the presence of worn metal particles and high temperatures. This is a normal phenomenon. The functions of transmission fluid are as follows: Reduce friction and wear, control clutch friction and synchronizer performance. Bear loads (low speed with high torque, vibration loads), dissipate heat, reduce vibration and noise, and remove contaminants from gear meshing areas (cleaning function). Prevent corrosion, pitting, and surface metal tearing, isolate metal surfaces to prevent direct contact between metal parts. The methods for changing transmission fluid are as follows: Drain the fluid by loosening the drain plug at the bottom of the transmission and then refill it. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to change automatic transmission fluid: Dynamic fluid exchange with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
1
1
Share

Why does the fuel gauge of a new car fluctuate up and down?

The main reason for the inaccurate fuel gauge is an issue with the fuel level sensor. Composition of the fuel gauge: Pointer-type fuel gauges are divided into combined and separate types. Combined gauges are more common in sit-in motorcycles, consisting of a fuel gauge combined with a tachometer, odometer, water temperature gauge, charging ammeter, etc., forming a large instrument cluster. Separate fuel gauges, on the other hand, consist of a single fuel gauge and are more common in retro-style and cruiser motorcycles. Working principle of the fuel gauge: When the current from the battery XG flows through coils L1, L2, and L3, the magnetic fields generated by these three coils exert force on the disc-shaped permanent magnet of the pointer-type gauge head. The magnetic field directions generated by coils L1 and L3 are perpendicular to the magnetic field direction generated by coil L2.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.