Can a Base Model Car Be Upgraded to a High-End Model?

1 Answers
MaddoxRose
07/29/25 2:26pm
Upgrading a base model car to a high-end model often requires spending more money than purchasing the high-end model directly. Below is relevant information about cars: 1. Definition of a car: According to the latest Chinese national standard "Terms and Definitions of Motor Vehicles and Trailers" (GB/T 3730.1-2001), a car is defined as a non-track vehicle powered by an engine, with four or more wheels, primarily used for transporting people and/or goods; towing vehicles that carry people and/or goods; or for special purposes. 2. Introduction to domestic car brands: Domestic car brands include Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc.
Was this review help?
1
2
Share
More Forum Discussions

Can I still get a license plate if my temporary license plate has expired?

Temporary license plate expiration does not prevent you from obtaining a permanent license plate. As long as all the required procedures and documents are complete and legal, you can still get a license plate regardless of whether the temporary plate has expired. However, driving with an expired temporary license plate will be penalized as driving without a license, resulting in a fine of 200 yuan and 12 demerit points. New vehicles should not use temporary license plates for more than 15 days, and owners should promptly apply for official license plates from the vehicle management authority. Relevant regulations on vehicle license plates: 1. The "Road Traffic Safety Law" stipulates that if a motor vehicle driven on the road does not display a license plate, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license plate, and impose a fine of 200 yuan and 12 demerit points in accordance with Article 90. 2. Temporary license plates clearly indicate their validity period, so owners must pay attention to the expiration date and not drive on the road with an expired temporary plate. Once caught, they will face penalties such as demerit points, vehicle impoundment, and fines, with varying enforcement methods in different regions.
5
2
Share

What is the maximum speed limit on urban roads without speed restrictions?

According to Article 45 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: Motor vehicles driving on roads must not exceed the speed indicated by speed limit signs or markings. On roads without a central dividing line, the speed limit for urban roads is 30 kilometers per hour, and for highways, it is 40 kilometers per hour. On roads with only one motor vehicle lane in the same direction, the speed limit for urban roads is 50 kilometers per hour, and for highways, it is 70 kilometers per hour. The following are the relevant speed limit regulations: 1. Vehicle type speed limits: The maximum speed for small passenger vehicles must not exceed 120 km/h, for other motor vehicles, it must not exceed 100 km/h, and for motorcycles, it must not exceed 80 km/h. The minimum speed must not be lower than 60 km/h. 2. Lane speed limits: On roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. On roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h. The minimum speed for the middle lane is 90 km/h. Vehicles traveling at speeds above 60 km/h but below 90 km/h should drive in the rightmost lane.
14
5
Share

How to Identify a Flood-Damaged Vehicle?

Here are methods to identify a flood-damaged vehicle: 1. Open the engine compartment. If the vehicle has been submerged in water, even after cleaning, some wiring harnesses in the engine compartment may still retain mud or water stains. 2. If the interior has been flooded, the vehicle would have been dried out. Seats that have been soaked and then dried will still show some traces, so examine them carefully. If there are many wrinkles, be cautious. 3. Check the metal parts under the interior, such as under the seats. If there is rust on the springs or support rods, it might be a flood-damaged vehicle, though it could also be due to poor rust prevention by the manufacturer. 4. Inspect the seat belts. Pull them out completely and check for mold or dampness. If several seat belts show these signs, it’s highly likely a flood-damaged vehicle. 5. Examine the sealed areas of components. Since the interior is tightly assembled from various parts, the presence of mud could indicate a flood-damaged vehicle. 6. Check the chassis, which directly reflects the vehicle’s condition. Look for obvious rust. If the chassis has been submerged in water for a long time, the rust marks will be quite noticeable.
18
3
Share

Are 4WD Vehicles More Stable in Rainy Weather?

4WD vehicles are more stable on slippery roads. Four-wheel drive refers to a vehicle maintaining a four-wheel drive form throughout the entire driving process. The following are specific introductions to the 4WD system modes: 1. Full-time drive: The front and rear wheels always maintain a 4-wheel drive mode, with the engine output torque set at a 50:50 ratio between the front and rear wheels during driving. Full-time drive offers excellent driving control and tracking performance, but it consumes more fuel and has poor fuel economy. 2. Part-time drive: The driver can switch between 2-wheel drive or 4-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for general off-road vehicles or 4WD SUVs. 3. On-demand drive: The drive mode is controlled by the computer. Normally, (front) rear-wheel drive is used on regular road surfaces. If the road conditions are poor or the drive wheels slip, the computer will automatically detect and immediately distribute the engine output torque to the other two wheels, switching to 4-wheel drive mode. This mode is simple to operate.
4
2
Share

What is the pH value of waste engine oil

The pH value of waste engine oil is 4.5-6. Waste engine oil refers to oil that has been contaminated with water, dust, other oils, and metal particles from component wear during use, leading to darkening in color and increased viscosity. It also refers to oil that has gradually deteriorated, forming organic acids, colloids, and asphalt-like substances. The regeneration of waste engine oil involves removing impurities through methods such as sedimentation, distillation, acid washing, alkali washing, and filtration. It is a toxic substance and classified as a nationally designated solid hazardous waste. The unauthorized trading of waste engine oil is strictly prohibited, and it should be handed over to qualified waste oil treatment companies for proper disposal. According to regulations such as the 'Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste,' 'Administrative Measures for the Licensing of Hazardous Waste Operations,' and 'Administrative Measures for the Manifest System of Hazardous Waste Transfer,' waste engine oil, diesel, heavy oil, etc., are classified as hazardous wastes under national regulations. Individuals and entities generating hazardous wastes must report the types, quantities, flow directions, storage, and disposal of such wastes to the environmental protection authorities and handle them in accordance with national regulations. Units engaged in the collection, storage, and disposal of hazardous wastes must apply for an operation license from the environmental protection authorities, which is processed by provincial-level environmental protection departments.
2
3
Share

Where is the chassis number of Foday brand vehicles located?

Foday brand vehicle chassis numbers can be found under the front windshield on the driver's side, as well as on the motor vehicle license. New licenses usually print the VIN code in the "Chassis Number" column. Other locations include insurance policies, various plates in the engine compartment, and the driver's side door pillar. The vehicle frame number is a unique set of seventeen English letters used to identify the car's manufacturer, engine, chassis serial number, and other specifications. On most vehicles, the frame number can be found on the driver's side dashboard and is visible from outside through the windshield. This marking is typically located on a sticker or plate inside the driver's side door or on the door frame base. Sometimes, the frame number may be printed inside the glove compartment. It also appears on the vehicle title certificate and insurance documents.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.