Can a B2 license be upgraded to an A1 license?

1 Answers
Melo
07/30/25 5:24am
To upgrade from a B2 license to an A1 license, you must hold a medium-sized bus B1 or large truck B2 license for more than five years, and have no full-point records in the last three consecutive scoring cycles before applying. The upgrade can only be processed at the registered residence. Below is relevant information: B2 License: Permits driving heavy, medium-sized trucks or large, heavy, medium-sized specialized operation vehicles. Heavy and medium-sized trucks mainly include trucks, such as the large dump trucks commonly seen on roads. Large, heavy, medium-sized specialized operation vehicles refer to vehicles equipped with special equipment or devices, such as water sprinklers, concrete mixers, fire trucks, etc. A1 License: The permitted vehicle types include buses with more than 20 passengers, and passenger vehicles with a body length exceeding 6 meters must also use an A1 license. Other vehicle types permitted by the A1 license include: A3 (city buses), B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), M (wheeled self-propelled machinery). Only an A2 license can drive full trailers and semi-trailers, which the A1 license does not permit.
Was this review help?
3
5
Share
More Forum Discussions

Where is the handbrake module located in the Subaru Outback?

Subaru Outback's handbrake module is located at the lower left side of the steering wheel, below the exterior rearview mirror adjustment buttons. Below are the working principle and function of the handbrake. Working principle of the handbrake: Mechanical handbrake: It connects to the rear wheel brake calipers through steel cables or similar mechanisms. When the handbrake is pulled, the calipers press against the brake pads to achieve the parking function. Electronic handbrake: By activating the parking switch, the motor drives the steel cables or similar mechanisms to connect with the rear wheel brake calipers, pressing the brake pads to achieve the parking function. The handbrake is an extremely important component of the vehicle's braking system. Proper use of the handbrake can effectively prevent the vehicle from rolling and reduce the danger caused by rolling when parked. Function of the handbrake: When parking, it provides resistance to the vehicle to prevent it from rolling. The parking brake, also known as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The parking brake has much less force than the service brake, just enough to prevent the vehicle from rolling on a slope. Generally, the parking brake is used when parking is needed. At traffic lights, you can also shift to neutral and use the parking brake, i.e., the handbrake.
1
2
Share

What Causes Incorrect Fuel Tank Ventilation in Volkswagen?

Incorrect fuel tank ventilation in Volkswagen may be caused by a clogged activated charcoal canister or charcoal canister solenoid valve. Introduction to the fuel tank: The fuel tank is a container for storing fuel in aircraft or automobiles, and it is also a specialized container for storing hydraulic oil or hydraulic fluid in hydraulic systems. Fuel tanks can be divided into two types: open tanks and closed tanks. The fuel tank must have a sufficiently large volume. To maintain oil cleanliness, the tank should have a sealed cover with an air filter installed on it. The bottom of the tank should be at least 150mm above the ground, and sufficient attention should be paid to the anti-corrosion treatment of the inner surface of the tank. Calculation of fuel tank volume: The fuel tank volume is calculated using the formula length x width x height. Taking a regular rectangular fuel tank as an example, with a width of 58cm, height of 58cm, and length of 110cm, the tank capacity = 58 x 58 x 110 = 370,040 cubic centimeters. Since 1 liter = 1,000 cubic centimeters, the capacity is approximately 370 liters. The standard fuel tank volume indicated in the vehicle specifications is not the maximum fuel tank capacity. According to international standards, L (liter) is used as the unit of measurement for automobile fuel tank capacity, and different countries and regions also have corresponding standards for automobile fuel tank capacity.
18
4
Share

Where is the BMW 3 Series daytime running light switch?

The BMW 3 Series daytime running light switch is located in the vehicle computer's lighting settings. Here is some related information about daytime running lights: 1. Function: Daytime running lights are installed at the front of the vehicle. Their purpose is to make the vehicle more easily noticeable during daytime driving. Their effect is not to help the driver see the road better, but to let others know that a vehicle is approaching. Therefore, these lights are not illumination lamps but signal lamps. While adding daytime running lights can make a car look cooler and more stylish, their primary benefit lies not in aesthetics but in improving vehicle visibility. 2. Regulations: In foreign countries, using daytime running lights can reduce vehicle accidents by 12.4% and lower the fatality rate in accidents by 26.4%. In short, the purpose of daytime running lights is traffic safety. As a result, many countries have established relevant standards in recent years to ensure that the production and installation of daytime running lights truly enhance safety. The most representative of these is the ECER79 in the ECE Automotive Technical Regulations by the European Economic Commission. China also began implementing the national standard "Photometric Characteristics of Daytime Running Lamps for Motor Vehicles" on January 1, 2010, which was released on March 6, 2009.
6
3
Share

Does the Binyue have a four-cylinder engine?

Geely Binyue does not have a four-cylinder model. This car is equipped with a 1.0t engine and a 1.5t engine, both of which are three-cylinder engines. Three-cylinder engines are the future development trend, and many manufacturers are actively developing small-displacement turbocharged three-cylinder engines. The advantages of three-cylinder engines are as follows: 1. Lighter weight: Compared to four-cylinder engines, three-cylinder engines have one less cylinder, one less piston, one less connecting rod, a shorter crankshaft, one less exhaust manifold, one less intake manifold, one less fuel injector, one less ignition coil, and one less spark plug. The benefit of this is that the overall weight of the three-cylinder engine is lighter. 2. Easier to arrange the motor: The three-cylinder engine has a smaller volume and does not take up too much space in the engine compartment, so car manufacturers can place an electric motor in the engine compartment. 3. More fuel-efficient: Since the three-cylinder engine has one less cylinder than the four-cylinder engine and also has a lower displacement, the three-cylinder engine is more fuel-efficient.
12
5
Share

What is the fuel consumption of the Orlando on the highway?

The average fuel consumption of the Orlando is 8.0L/100km, with a range between 6.5L and 9.0L/100km. Fuel consumption is influenced by various objective factors, such as driving conditions, personal driving habits, whether the air conditioning is on, and the vehicle's load. Therefore, there is no precise or standard answer regarding fuel consumption. Here are some fuel-saving tips for driving: 1. Reduce the vehicle's load: Avoid keeping unnecessary items in the car. Not only do they take up space, but they also increase fuel consumption. A heavier vehicle requires the engine to expend more energy to drive, leading to higher fuel consumption. 2. Avoid sudden braking and accelerating: Especially when starting, sudden braking can significantly increase fuel consumption. 3. Maintain the vehicle within the economical speed range: Every car has an economical speed range, typically between 70KM/h and 90KM/h. Within this range, the car consumes the least fuel. Driving too slowly can also increase fuel consumption. 4. Keep tire pressure at the appropriate level: Tire pressure that is too high or too low increases friction and fuel consumption. Additionally, it can lead to unexpected incidents like tire blowouts, posing safety risks.
6
5
Share

What Does the Motorcycle License Subject 1 Test Cover?

The test content includes the most fundamental knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The total test duration is 45 minutes, with the exam paper consisting of 100 questions in the form of true/false and multiple-choice questions. The full score is 100, and a passing score is 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Standards". Subject 1 Test Process: Follow the staff's arrangements to collect your driving training file in order at the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the test area; No loud noise is allowed in the test area; Regulation textbooks are not allowed in the test area (or must be placed in a bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test will sign under the guidance of the staff at the exit and then leave the test area; Candidates who fail the test can leave the test area immediately and wait for the driving school staff to notify them of the retake time.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.