Can a B1 Driver's License Be Upgraded to an A2?

1 Answers
BryceAnn
07/29/25 4:20pm
Currently holding a B1 driver's license, you can directly upgrade to an A2, but you must have held the B1 license for more than three years or have held a large passenger vehicle driving qualification for more than one year. Additionally, you must not have accumulated 12 penalty points in any of the last three scoring cycles before applying. To upgrade from a B1 to an A2 driver's license, the following conditions must be met: 1. You must already hold a motor vehicle driver's license, and when applying to add a new vehicle class, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying. 2. You must have held a medium or large passenger vehicle driving qualification for more than three years or a large passenger vehicle driving qualification for more than one year, and you must not have accumulated 12 penalty points in any of the last three consecutive scoring cycles before applying.
Was this review help?
7
1
Share
More Forum Discussions

Which is better, direct injection or multi-point electronic injection?

Multi-point electronic injection and direct injection are not on the same dimension; direct injection is a type of multi-point electronic injection. Power output: A car's engine uses a mixture of fuel and air as its fuel source. If the fuel supply system malfunctions, it can affect the engine's power output and even prevent the engine from starting. There are three types of fuel injection systems for car engines: multi-point electronic injection, direct injection, and hybrid injection. Fuel injection: In a multi-point electronic injection engine, the fuel injector is installed in the intake manifold. In a direct injection engine, the fuel injector is installed on the cylinder head. A hybrid injection engine features both direct injection and multi-point electronic injection, allowing it to choose different fuel injection methods under different conditions, thereby improving engine efficiency and power.
1
0
Share

What gear should an automatic transmission car be in when towing?

Use the N gear. However, the towing speed should not exceed 50 kilometers per hour, and the towing distance in neutral should not be too long. Introduction: Automatic transmission, as the name suggests, means that the driver does not need to shift gears manually. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. Principle of automatic transmission: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, the more gears there are, the more fuel-efficient the transmission is.
18
5
Share

Why Can't the Key Be Pulled Out in an Automatic Transmission Car?

Automatic transmission cars may fail to release the key because the gearshift is not properly returned to the P (Park) position. After turning off the engine, if the gearshift does not fully return to the P position and fails to trigger the electronic sensor, the owner should check for any obstructions in the gear slot. After removing any obstructions, start the car and shift the gear again to ensure it is fully returned to the P position, allowing the key to be pulled out. Automatic transmission cars may also experience situations where the key cannot be turned. This is due to the car's steering wheel auto-lock feature, a security function. It usually occurs when the steering wheel is inadvertently turned left or right while parking and turning off the engine, or if the wheels are not aligned properly. Force applied to the steering wheel can activate the auto-lock, causing the steering lock pin to engage with the steering column, making the steering wheel immovable and the key unable to turn. In this case, while gently turning the key with the right hand, use the left hand to wiggle the steering wheel left and right, which should allow the key to turn.
5
5
Share

Does Lower Fuel Consumption per 100 km Mean More Fuel Efficiency?

The lower the fuel consumption per 100 kilometers, the more fuel-efficient the car is. The fuel consumption per 100 kilometers is a key indicator to measure whether a car is fuel-efficient, and it is usually displayed on the car's dashboard. The comprehensive fuel consumption per 100 kilometers is not fixed; in addition to being affected by the car's engine displacement, it is also influenced by other factors, resulting in some fluctuations. Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a car traveling 100 kilometers, which is an important parameter of a car. The fuel consumption per 100 kilometers published by the Ministry of Industry and Information Technology is a comprehensive data obtained under certain conditions and at a certain speed. The fuel consumption per 100 kilometers published by the Ministry of Industry and Information Technology is an ideal value, and the actual fuel consumption is often higher than this value. Fuel consumption per 100 kilometers = fuel consumption (liters) ÷ distance traveled (kilometers) × 100. The usual calculation method is to fill up the fuel tank when the fuel gauge light comes on, reset the trip odometer to zero, and then record the trip odometer when the fuel gauge light comes on again. The number of liters of fuel added divided by the distance traveled and then multiplied by 100 gives the fuel consumption per 100 kilometers. Fuel consumption per 100 kilometers is an indicator of a vehicle, while working condition fuel consumption is a standardized statistical specification. The slower the vehicle travels within the economic speed range, the higher the fuel consumption per 100 kilometers. Beyond the economic speed, the opposite is true. If the engine speed is controlled within the same safe speed range, regardless of the vehicle's speed, the hourly fuel consumption is the same. When calculating fuel consumption for highways and engineering transportation, the first two specifications are not suitable, and calculating by hourly fuel consumption is more accurate. The formula for hourly fuel consumption is: fuel consumption per 100 kilometers / 100 * limit * 0.8 (the limit speed is the highest safe speed).
7
1
Share

What is Engine Compression Ratio?

Engine compression ratio is the ratio of the volume of the cylinder before compression to the volume of the compressed air-fuel mixture, which is the ratio of the maximum volume of the cylinder when the piston is at the bottom dead center to the volume of the cylinder when the piston is at the top dead center. Engine operation process: Engines operate on a four-stroke cycle, consisting of intake, compression, power, and exhaust strokes. During the intake and power strokes, the piston is at the bottom dead center position, while during the compression and exhaust strokes, the piston is at the top dead center position. For example, if the cylinder volume is 10 when the piston is at the bottom dead center and the compressed mixture volume is 1 when the piston is at the top dead center, the engine compression ratio is 10:1. Impact of compression ratio on engine performance: Higher engine compression ratio: If the engine has a higher compression ratio, the air-fuel mixture is compressed under greater pressure and at a relatively higher temperature. The gasoline in the mixture vaporizes more completely and is easier to ignite. When the spark plug fires after full compression, more energy is released in a very short time. This energy is then transmitted to the wheels through the piston, crankshaft, and other mechanisms, becoming the driving force for the car. Lower engine compression ratio: In engines with a lower compression ratio, gasoline molecules do not vaporize completely. Therefore, after the spark plug fires, the combustion speed is relatively slower, and some energy is converted into heat, causing the engine temperature to rise instead of being fully converted into the car's kinetic energy. Thus, for the same cylinder volume, a higher compression ratio results in greater power output. The engine compression ratio is not the higher the better, but should be appropriate. An excessively high compression ratio can reduce stability and shorten the engine's lifespan.
17
4
Share

Will points be deducted for the driver touching the passenger's chest?

Points will be deducted. During driving, using the right hand to touch the thigh or chest of the passenger in the front passenger seat is an extremely dangerous driving behavior. Frequent vehicle inspection: To ensure driving safety, it is best to conduct a general inspection around the vehicle before each trip, checking for any tire deflation, obstructions on the license plate, whether the rearview mirrors are properly adjusted, and testing the brakes for any issues. Also, periodically check the water level in the radiator over longer intervals. Pay attention to road conditions: While driving, always maintain a clear mind and stay alert to road conditions, prioritizing safety above all. Remember not to show off, overtake recklessly, and adopt the attitude of "preferring to wait three minutes rather than rush a second."
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.