···
Log in / Register

Can a 9-point deduction on the driver's license be handled through Traffic Management 12123?

4 Answers
McBella
07/28/25 6:54pm

Can a 9-point deduction on the driver's license be handled through Traffic Management 12123? The following is a detailed introduction to Traffic Management 12123: Overview: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, with technical support provided by the Traffic Management Research Institute of the Ministry of Public Security. Functions: It provides comprehensive traffic safety services for vehicle owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance and handling of services such as motor vehicle/driver's license/illegal handling, traffic safety information inquiry, service notification and reminder, service guidance, and road access services.

Was this review help?
16
1
Share
VonJune
08/11/25 10:48pm

My driver's license was deducted 9 points. I've handled similar situations on the Traffic Management 12123 APP, and the whole process was quite smooth. You need to download the APP, register and log in, find the violation records, confirm the point deduction details, and then pay the fine. The deducted points cannot be directly eliminated, but after paying the fine, the points will be automatically recorded in the system. Last time after my points were deducted, I also attended a safety learning course at the vehicle management office, which offset some of the points—this is a common practice. If you have few points left, be careful not to make new mistakes, because accumulating to 12 points means you'll have to retake the theoretical exam. It's advisable to regularly check violation records on the APP and handle them promptly to avoid delays. I also learned some safe driving habits, like not using my phone while driving, which helped me reduce the risk of violations. In short, the 12123 APP makes point deduction handling much more convenient, but don't forget to attend the follow-up learning courses.

Was this review help?
14
4
Share
Expand All
McMaya
09/30/25 4:37am

With 9 points deducted from my driver's license, I can handle it on the Traffic Management 12123 app. I've used this app several times, and the process is simple and intuitive. Open the app, select violation processing, confirm the electronic ticket information, and click to pay. The fee is directly deducted from the bank card, and the points are recorded immediately. The app can also remind you of your points status and opportunities for reduction. I often recommend it to friends to save them the trouble of visiting the vehicle management office. Don't panic after getting points deducted—you can reduce them through online safety courses or local learning. I've encountered minor glitches with the app, but restarting usually fixes them, and it's efficient and reliable most of the time. Developing good driving habits, like wearing seat belts and controlling speed, can help reduce point accumulation. The 12123 app is constantly updating its features, making it even more convenient to check and handle points, especially for new drivers.

Was this review help?
15
5
Share
Expand All
OQuinn
11/13/25 6:29am

If your driver's license is deducted 9 points, you can handle it directly on the 12123 APP. Last time I had points deducted, I logged into the APP and resolved it in just a few minutes—checking violations, accepting penalties and making payments, with points automatically recorded. It’s quite convenient, no need to queue. Don’t panic after points are deducted; the APP will guide you to participate in learning or exams, such as watching videos and answering questions, which can offset points. I noticed the points rule: accumulating up to 12 points is dangerous, and you must retake the test. Regularly check APP notifications and set reminders to prevent new violations. Safe driving tips, like stopping and waiting for the green light, can also reduce risks. The APP interface is user-friendly, and I find it hassle-free. After handling it, don’t forget to review the rules periodically.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the horsepower of the Geely Boyue?

Geely Boyue has a maximum horsepower of 163ps. Taking the 2021 Geely Boyue as an example, it is a 5-door, 5-seater compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1575kg. The 2021 Geely Boyue is equipped with a 1.8t turbocharged engine, with a maximum power of 120kw, maximum power speed of 5500rpm, maximum torque speed ranging from 1500rpm to 4500rpm, and is paired with a 6-speed manual transmission.
3
3
Share

How is a car battery charged?

Car battery charging method is: 1. Open the front cover of the car and take out the battery charger; 2. Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Methods to check for insufficient car battery power are: 1. The car horn sound becomes weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging are: 1. Battery voltage below 10% of the rated voltage will cause battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoid removing the battery to prevent data loss.
16
0
Share

What Causes the Rattling Noise When the Atenza Goes Over Bumps?

Atenza's rattling noise when going over bumps is caused by loose component screws. It is necessary to visit a 4S shop to check the loose parts and tighten the screws. Below is a related introduction to the Atenza: 1. Body Dimensions: The Atenza has a body length, width, and height of 4870mm, 1840mm, and 1445mm respectively, with a wheelbase of 2830mm. 2. Powertrain: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine; paired with a 6AT transmission. (1) 2.0-liter naturally aspirated engine: The engine has a maximum power of 158 horsepower and a maximum torque of 202 Nm. The engine's maximum power speed is 6400 rpm, and the maximum torque speed is 4000 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. (2) 2.5-liter naturally aspirated engine: The engine has a maximum power of 192 horsepower and a maximum torque of 252 Nm. The engine's maximum power speed is 6100 rpm, and the maximum torque speed is 3250 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
8
0
Share

When should the original timing belt be replaced?

The original timing belt should be replaced when the vehicle reaches 80,000 kilometers. The functions of the timing belt are: 1. To drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times; 2. To guarantee the engine cylinders can properly intake and exhaust air. The replacement procedure for the timing belt is: 1. Remove the valve cover and the timing belt housing; 2. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with the fixing bolt; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts horizontally; 4. Remove the old belt and install the new one; 5. Ensure there is no gap at the crankshaft position sensor during installation to avoid triggering fault codes.
20
1
Share

How to Install a Belt?

The method for installing a belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and smoothly guide it upwards from the side opposite the tensioner pulley to place it on the camshaft pulley; 3. Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and matching a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the generator belt will be visible; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.
14
0
Share

How to Disassemble the Wuling Hongguang Key?

The method to disassemble the Wuling Hongguang key is: 1. Use a flathead screwdriver to pry open the side opening of the key; 2. Open the key casing along the pried gap. Taking the 2019 Wuling Hongguang S3 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4655mm, width 1735mm, height 1790mm, a wheelbase of 2800mm, a fuel tank capacity of 49 liters, and a curb weight of 1380kg. The 2019 Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, a maximum torque of 140Nm, and is paired with a 6-speed manual transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.