Can a 75d23 car battery be replaced with a 55d23?

1 Answers
AdrianaDella
07/29/25 9:33pm
It cannot be replaced; do not change the battery arbitrarily. Extended information about car batteries is as follows: Definition: The normal service life varies from 1 to 8 years, largely depending on the condition of the vehicle. If the vehicle's alternator charges normally and there is no electrical leakage or grounding issue, the battery can generally last more than 3 years. Working principle: It uses lead plates filled with spongy lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead acts as the negative electrode, undergoing oxidation and being converted into lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction and being converted into lead sulfate.
Was this review help?
9
4
Share
More Forum Discussions

Is it necessary to install an automatic fire extinguishing device in a car?

Installing an automatic fire extinguishing device in a car is necessary as it helps prevent fire hazards. Below is relevant information about vehicle automatic fire extinguishing devices: 1. Introduction: Vehicle automatic fire extinguishing devices are firefighting installations mounted in the engine compartments of various vehicles, designed to extinguish vehicle fires. Common types include aerosol automatic fire extinguishing devices and dry powder automatic fire extinguishing devices. 2. Product comparison: Compared to dry powder devices that rely on powder coverage for fire suppression, aerosol devices offer unparalleled advantages. Typically, dry powder fire extinguishers have a shelf life of about 3 years and require annual maintenance. In contrast, aerosol automatic fire extinguishing devices are gas-based systems that can rapidly disperse and cover the entire space when activated. Within the complex structure of a vehicle's engine compartment, dry powder devices may struggle to effectively extinguish fires due to interference from electric fans during simulated fire scenarios.
7
1
Share

Can Clutch Fluid and Brake Fluid Be Shared?

Clutch fluid and brake fluid can be shared. Function: The clutch controls the engagement and disengagement between the engine and the wheel transmission. The clutch uses fluid as the transmission medium, leveraging the principle that fluids cannot be compressed to provide assistance. Its working principle is essentially the same as that of brake fluid. Brake Fluid: In most cases, brake fluid (hydraulic fluid) and clutch fluid are interchangeable. Commonly available "brake and clutch fluid" can be found on the market. For household vehicles, DOT3 or DOT4 standard fluids are generally used. Vehicles originally using DOT3 standard can switch to DOT4, but those originally using DOT4 standard should not use DOT3 as a substitute.
12
2
Share

Can I Go Straight in a Left-Turn Lane?

When both left-turn and straight-ahead signals are green, vehicles in the left-turn lane cannot proceed straight directly, otherwise they will incur penalty points and fines. Some lanes have both left-turn and straight-ahead markings, in which case drivers may turn left or go straight while obeying the traffic signals. Below is an introduction to common road signage knowledge: One-way street: Indicates that the entire road only permits vehicles to travel in one direction. For example, if a certain road section only allows travel from south to north, but a driver proceeds from north to south, this constitutes driving against traffic and will result in penalty points and fines. No long-term parking: Indicates that temporary parking is permitted, such as for passenger pick-up/drop-off or loading/unloading goods.
13
2
Share

Where is the fuel tank button in Volkswagen?

The fuel tank switch in Volkswagen is located on the left side below the steering wheel on the dashboard. From left to right, the first lever is the trunk control button, and the second lever is the fuel tank cover control button. Method to check fuel tank capacity: Drive the car until the fuel gauge shows only one or two bars remaining. If there is a gas station nearby, you can drive until the fuel indicator light comes on, then tell the staff at the gas station to fill it up. This way, you can estimate the approximate capacity of the fuel tank. Method to check remaining fuel: Check the fuel gauge, which indicates the amount of fuel remaining in the car's fuel tank. It can be either a pointer or a digital display. The low fuel warning light alerts when the fuel in the tank falls below a certain level, indicating that you should refuel promptly.
6
4
Share

What are the differences between a Vehicle Identification Number and a chassis number?

Here are the specific differences between a Vehicle Identification Number and a chassis number: 1. Different meanings: (1) The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis number, and other specifications of the vehicle. (2) The automobile identifier refers to the trademark that distinguishes a car from other manufacturers and indicates the car's manufacturer, model, engine power, load capacity, engine and vehicle serial numbers, etc. 2. Different functions: (1) The function of the automobile identifier is to facilitate sellers, users, maintenance personnel, and traffic management departments in identifying the vehicle's "identity." According to national regulations, these marks are checked during new vehicle registration and annual inspections. (2) Vehicle Identification Number: To avoid confusion with the numbers 1, 0, and 9, the letters I, O, and Q are not used. The 10th digit, representing the model year, does not use I, O, Q, U, Z, or 0.
12
4
Share

Should a section be left uncovered for the rearview mirror when applying car window film?

Should a section be left uncovered for the rearview mirror when applying car window film? It is unnecessary. Below are the detailed explanations: 1. Principle: During the film application process, the glass needs to be cleaned, and water is used as a lubricant to position the film. Therefore, it is impossible to completely remove all water at that time. Small water droplets may accumulate after a few hours, which is a normal phenomenon. These droplets will disappear automatically after some time. 2. Precautions: After the car window film is applied, the windows should not be rolled down. This is mainly to prevent the edges of the film from loosening when the windows are rolled up or down, as the edges may not have completely dried. If the film does not adhere tightly, it will affect the lifespan of the film and its effectiveness in heat insulation and filtering strong or glaring light. Therefore, special attention should be paid to the edges of the windows during the film application process.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.