···
Log in / Register

Can a 4S shop repaint the car?

3 Answers
AngelinaLynn
09/01/25 5:24am
Yes, and the 4S shop has the original paint formula, and the operation process is more standardized. The repainting effect of the 4S shop is better than most repair shops. Additional information is as follows: The effect of painting: The quality of the painting effect is influenced by several factors, such as the color of the paint, the painting environment, and the technical level of the staff. In addition, using the original paint does not necessarily match the original car paint color, as the paint will oxidize after being used for a period of time. Notes on repainting: The base material must be completely dry before spraying the clear coat, otherwise, the paint surface may lose its gloss. The newly sprayed paint surface cannot reach 100% curing, so polishing a single area should not take too long. Excessive polishing time may cause the paint surface to overheat, leading to loss of gloss. The grinding agent should not contain silicon or wax, otherwise, pits may appear on the surface when spraying the clear coat. In mild cases, it may require polishing, while in severe cases, it may require rework.
Was this review help?
2
1
Share
DiChristian
09/13/25 8:05am
Yes, you can definitely get a paint touch-up at a 4S dealership. I remember last week when my car was scratched by a tree branch while parked on the roadside, and the paint was completely peeled off—I was quite anxious. At the 4S dealership, the technician told me they have a dedicated paint shop with advanced equipment and use the original manufacturer-recommended paint formula, ensuring the new paint perfectly matches the car body color. If you don't look closely, you can't even tell it was repaired. The process is quite straightforward: first, they clean the damaged area, sand off any rust and old paint, then use masking tape to protect the surrounding areas, apply primer, spray the topcoat, and finally cure it in the baking room. In terms of cost, minor scratch repairs typically range from 300 to 500 RMB, while larger area repainting might cost over 1,000 RMB. However, the results are much more durable compared to roadside shops. I chose the 4S dealership mainly because it prevents secondary damage, protects the paint from rust, and maintains the car's resale value—especially important for new cars.
Was this review help?
13
3
Share
Expand All
DelSebastian
10/28/25 2:05am
Last time I got a small dent on the front of my car with paint damage, I immediately went to the 4S shop to ask. They arranged the paint repair service without hesitation, and it took just over two hours to complete. The result exceeded my expectations. The cost was 400 yuan, and the technician mentioned they use high-tech color matching machines to accurately restore the original factory paint color. The paint layer they applied is thick and durable, resistant to bubbling or yellowing. I also checked prices at roadside shops, which were cheaper but the paint quality was inferior, leading to issues within a few months. My advice is: although 4S shops are a bit more expensive, they are definitely worth prioritizing for the health and appearance maintenance of your car's paint. Especially for small scratches, if not treated promptly, rainwater can seep in, causing rust and expanding the damaged area.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What is the RPM during clutch semi-engagement?

During semi-engagement, the RPM is equivalent to idle speed, typically ranging from 800 to 1000 RPM. If the accelerator is not pressed, this RPM will increase when the accelerator is applied. Clutch semi-engagement refers to the unstable connection state of the clutch, where the driver gradually reduces the pressure on the clutch pedal, causing the driving plate and driven plate to slip while rotating. Manual transmission vehicles often require semi-engagement for various operations, but prolonged use can lead to clutch wear. During driving tests, semi-engagement is used in the field test but is prohibited in the road test. The shorter the duration of semi-engagement, the better. Prolonged semi-engagement accelerates clutch disc wear. If frequent semi-engagement is necessary, ensure proper cooling by alternating between semi-engagement and disengagement. Avoid resting your left foot on the clutch pedal, as this keeps the clutch in semi-engagement and increases wear. Regular clutch maintenance is essential. If you notice a burning smell or difficulty shifting gears, the clutch disc may be damaged and requires immediate repair. When lifting the clutch pedal to the semi-engagement point, pause for 2-3 seconds before fully releasing it to prevent jerking or lurching.
6
1
Share

What are the length, width, and height dimensions of the XRV trunk?

The dimensions of the Honda XRV trunk are as follows: height 830mm, width 1000mm, standard depth 780mm, maximum extended depth 1720mm, with a trunk capacity ranging from 437 to 1456 liters. Below is an introduction to the Honda XRV related content: 1. Powertrain: The Honda XRV is equipped with a 1.5T turbocharged engine that meets the National VI emission standards, delivering a maximum power of 177 horsepower. The transmission system continues to be paired with a 6-speed manual and CVT gearbox. 2. Design: The rear bumper of the Honda XRV is adorned with chrome trim, enhancing its refined appearance. In terms of the exhaust system, the new model will offer either dual exhaust outlets or a single exhaust outlet, depending on the variant. The interior design of the Honda XRV continues the current model's style, featuring a clean and simple dashboard layout with reasonably arranged functional areas.
15
4
Share

Where is the largest used car market in China?

The Beijing Used Vehicle Trading Market is the largest used car trading market in China, also known as the Beijing Used Car Market. Established in 1985, it is commonly referred to as the Huaxiang Used Car Market due to its location near the Huaxiang Bridge on the South Fourth Ring Road in Beijing. Related information: 1. Introduction: A used car market is a place for the secondary circulation of motor vehicle commodities, possessing the dual attributes of intermediary service providers and commodity operators. Specifically, the functions of a used car trading market include: used car appraisal, purchase, sale, consignment, replacement, auction, transfer, registration, licensing, insurance, and other services. 2. Expansion: Additionally, used car trading markets should strictly review the legality of used car transactions in accordance with relevant national laws and regulations, resolutely preventing the trading of stolen vehicles, smuggled vehicles, illegally assembled vehicles, and vehicles with incomplete documentation and fee certificates.
1
0
Share

Is it better to use 92 or 95 octane gasoline for a turbocharged CR-V?

It is better to use 95 octane gasoline for a turbocharged CR-V. Currently, 92 octane gasoline is mostly ethanol-blended, which is not very suitable for turbocharged engines. Here is some relevant information about engine gasoline: Gasoline Anti-Knock Properties: The higher the octane rating of gasoline, the better its anti-knock properties. Generally, turbocharged engines operate under high pressure and temperature inside the cylinders, so most turbocharged engines require 95 octane gasoline to prevent knocking. Compression Ratio: The compression ratio of a car engine refers to the degree to which the air-fuel mixture is compressed. Generally, engines with a compression ratio greater than 9.5:1 are best suited for 92 octane or higher gasoline, while those with a compression ratio greater than 10:1 are best suited for 95 octane or higher gasoline. High-Octane Gasoline: Using high-octane gasoline ensures stable engine operation, excellent combustion conditions, reduces carbon deposits, and protects the oxygen sensors by minimizing collisions between moving parts. In practice, high-octane gasoline is more fuel-efficient and allows for faster driving at constant speeds in high-compression-ratio engines, whereas low-octane gasoline can be used but is not optimal.
18
4
Share

What Are the Consequences of Not Scrapping a Car?

It will affect the renewal of the driver's license or annual inspection; if an accident occurs while driving a scrapped vehicle, even if the other party is fully at fault, you will still be responsible for the compulsory traffic insurance compensation limit in case of personal injury or death. Vehicle scrapping process: The car owner applying for scrapping and renewal must fill out and submit the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate, stamped with the owner's seal. The registration office will then issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age. For vehicles that have not yet reached the scrapping age, the vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice" if applicable. The owner can then choose a qualified recycling company to dismantle the vehicle. The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the chassis must be cut. The owner must then submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed after approval according to regulations.
19
4
Share

What are the reasons for the lack of acceleration in Jinbei Haise?

Jinbei Haise engine acceleration weakness reasons are as follows: 1. Carbon deposits: Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, intake carbon deposits, etc. These locations are closely related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power, resulting in sluggish acceleration and muffled sounds. 2. Fuel system: Adding incompatible fuel grades can cause a decrease in the vehicle's output power and reduced performance. Or, due to a blocked fuel tank vent, clogged fuel tank switch, fuel filter, or fuel line between the tank and carburetor, the required fuel supply cannot be met, leading to an overly lean air-fuel mixture and weak engine acceleration. 3. Intake: If the air filter is not cleaned in time after long-term use and becomes clogged, insufficient air volume will result in an overly rich combustible mixture, causing a drop in engine power. For vehicles equipped with turbochargers, if the turbocharging device malfunctions, even when the throttle is applied, the engine will remain sluggish and fail to deliver power. 4. Engine overheating: Engine overheating can lead to poor lubrication, increased mechanical wear, reduced engine power, and weak acceleration.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.