Can a 4.2-meter truck be driven with a C-class license?

1 Answers
DelBenjamin
07/29/25 6:48am
A 4.2-meter truck can be driven with a C-class license, as long as it is a blue-plate truck, but the driver must obtain the corresponding freight transport qualification certificate. The C1 driver's license allows driving trucks with a maximum length of less than 6 meters and a total mass of less than 4500 kg. A 4.2-meter box truck can be driven with a C1 license, as box trucks are generally low-speed trucks. However, if it is a large truck, it cannot be driven with a C1 license. The following are the vehicle types permitted for a C1 driver's license: 1. Small and mini passenger vehicles; 2. Light and mini cargo vehicles; 3. Light and mini special-purpose vehicles; 4. C2 automatic transmission, C3 low-speed cargo vehicles, C4 three-wheeled vehicles, etc., but excluding C5 small automatic transmission passenger vehicles for the disabled.
Was this review help?
15
5
Share
More Forum Discussions

Is the Envision's Dual Clutch Dry or Wet?

The Envision's dual clutch is dry. The function of a dry dual clutch is to ensure smooth vehicle starts, reduce the impact load on transmission gears during gear shifts, and prevent transmission system overload. The Envision is a mid-size SUV under SAIC-GM Buick. Taking the 2021 Envision 532T Two-Wheel Drive Leading model as an example, its body dimensions are: length 4694 mm, width 1839 mm, height 1686 mm, with a wheelbase of 2750 mm. The 2021 Envision 532T Two-Wheel Drive Leading model is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 124 kW at 5600 rpm, and a maximum torque of 250 Nm between 1700 to 4400 rpm, paired with a 7-speed dual-clutch transmission.
16
4
Share

What is the weight of the Audi R8?

Audi R8 weighs 1700 kilograms. Introduction to the Audi brand: Audi is one of the oldest car manufacturers in Germany. Since 1932, Audi has adopted the four-ring emblem, which symbolizes the merger of Audi with DKW, Horch, and Wanderer to form the Auto Union. Main Audi models: The main models include Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S and RS performance series.
8
0
Share

Where is the engine number located on a BMW 320li?

The engine number of a BMW 320li is located under the front hood or on the right front door of the vehicle. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license will have the engine number printed, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production number of the engine. Each engine can only have one engine number, and the number for each engine is unique.
20
1
Share

Where is the OBD port located on an older Volkswagen Passat?

Volkswagen's OBD port is located next to the battery in the Passat B5, allowing external diagnostic computers to connect to the Passat B5's electronic control unit for maintenance operations. Common functions of OBD: Continuously monitor the faults of components and systems to ensure that the vehicle's emissions do not exceed OBD regulatory requirements throughout its lifespan. When an emission-related fault is detected, the OBD system can alert via the MIL (Malfunction Indicator Lamp) on the dashboard. This ensures that faulty vehicles are repaired promptly, reducing emissions. How the OBD system works: The OBD system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it immediately issues a warning. When a system fault occurs, the MIL or Check Engine warning light illuminates, and the Powertrain Control Module (PCM) stores the fault information in memory. The fault codes can be retrieved from the PCM using a specific procedure. Based on these fault codes, technicians can quickly and accurately identify the nature and location of the fault.
4
3
Share

What is the fuel consumption of the manual Sagitar 1.6?

The official combined fuel consumption of the Sagitar 1.6 manual model is 6.5L/100km. Due to the numerous uncertain factors in actual road conditions, the obtained data is for reference only. Generally, real-world fuel consumption tends to be higher than the tested values. Summer air conditioning system check: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance can lead to increased fan speed and lower temperature settings to achieve a comfortable cooling effect. Frequent hard braking: Frequent hard braking is a primary reason for persistently high vehicle fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. Small-displacement vehicles should not use air conditioning too aggressively: For vehicles exposed to direct sunlight, it is not advisable to turn on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
1
0
Share

What is the normal tire pressure for the Buick Envision?

The normal tire pressure range for the Buick Envision is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard. The Buick Envision is equipped with an active tire pressure monitoring function, allowing you to view the specific tire pressure values directly on the dashboard. The tire pressure monitoring system automatically monitors the tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear of the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, compromising driving safety; increases movement of tire components, leading to excessive rolling and abnormal heat generation; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system continues to record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.