Can a 4.2-meter high-barrier truck carry 25 cubic meters?

2 Answers
SanAlexa
07/28/25 6:37pm
A 4.2-meter high-barrier truck cannot carry 25 cubic meters. Normally, a 4.2-meter high-barrier truck is limited to 5 tons, and when fully loaded, it can carry around 13 cubic meters. The actual capacity depends on the type of cargo being transported. For palletized goods, the height of the pallet must be subtracted. Below is an extended introduction: General Information: Typically, the internal dimensions of a 4.2-meter truck are: length: 4.2 meters, width: 1.6~1.8 meters, height: 1.6~1.8 meters. The height from the ground must not exceed 4 meters, and for vehicles transporting containers, it must not exceed 4.2 meters. Therefore, the general loading height is only about 2.5 meters. Legal Provisions: Article 54 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' states: The load of a motor vehicle must not exceed the approved load capacity specified on the vehicle's license. The loading length and width must not exceed the dimensions of the vehicle, and the following regulations must be observed: For heavy and medium-duty trucks, as well as semi-trailers, the height from the ground must not exceed 4 meters, and for vehicles transporting containers, it must not exceed 4.2 meters. Therefore, the general loading height is only about 2.5 meters.
Was this review help?
1
2
Share
BeckettDella
08/12/25 12:08am
I've studied the dimensions of many trucks. A 4.2-meter high-rail truck is generally about 4.2 meters in length, 1.8 meters in width, and between 1.8 to 2 meters in height. This calculates to a cargo volume of around 15 cubic meters, with 18 cubic meters being the absolute maximum. A 25-cubic-meter load would require a larger 6.8-meter truck, as the space needs to be doubled to accommodate it. Trying to squeeze it in might mean stacking goods beyond the rail height, which is extremely dangerous. Not only could you be fined by traffic police for overloading, but the risk of goods falling and causing injuries is even more concerning. I recommend measuring your truck's exact dimensions first, or simply renting a larger model to avoid wasted effort.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What are the causes of the parking brake system failure in the Audi Q3?

Audi Q3 parking brake system failure may be caused by sensor malfunction or ABS pump failure. Parking brake system failure warning signs: The electronic parking brake light keeps flashing, accompanied by "automatic parking function failure". After parking and restarting, most vehicles no longer display this fault. Causes and related solutions: A switch bus socket is not properly seated. The parking brake sensor may have mud/water contamination during rainy days or metal shavings during the new car break-in period, leading to inaccurate detection. Most 4S shops suggest this is an occasional fault code that can be resolved by clearing it for normal operation.
5
1
Share

What is the reason for the Civic stalling after stepping on the brakes after turbo modification?

The reason for the Civic stalling after stepping on the brakes after turbo modification is a dirty throttle body. Introduction to the throttle body: It is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to perform work. It connects to the air filter at the top and the engine block at the bottom, and is known as the throat of the car engine. Introduction to the Honda Civic: The CIVIC is a legendary model from Honda, born in 1972. Over the past 50 years, it has undergone ten generations of innovation and evolution, earning the recognition and trust of 27 million users worldwide. From its inception, the CIVIC has represented Honda's spirit of continuous challenge and breakthrough, making it Honda's most core and iconic model.
12
1
Share

Which manufacturer produces the battery for the Geely Kung Fu Bull?

Geely Kung Fu Bull's battery is produced by CATL. Battery Introduction: New energy vehicle batteries commonly use ternary lithium batteries, which have the advantages of high capacity and low pollution; lithium-iron batteries can provide discharge times approximately six times that of alkaline manganese batteries; compared to nickel-metal hydride batteries, they offer stable discharge voltage and significantly superior storage time. Battery Lifespan: The lifespan of new energy vehicle batteries is generally around 8 years, with a specific driving range of 150,000 to 200,000 kilometers. Maintaining a steady driving speed can extend the battery's lifespan, while aggressive driving may cause certain damage to the battery.
10
1
Share

How is the body steel strength of the 11th-generation Civic?

11th-generation Civic body steel strength is very good. Steel strength: The vehicle adopts a high-standard, high-strength structural design, with high-strength steel accounting for 75% of the body, and the average steel plate strength of the body is 690MPA. The role of using high-strength materials: The safety of a car can be roughly divided into two categories: active safety and passive safety. Among them, active safety is replaced by various high-tech configurations, such as various radars, cameras, and other sensing devices, which can collect data to facilitate the driver's control of the car. In passive safety, body strength is a very important indicator, according to the division of mechanics.
7
1
Share

What is used to clean the throttle body of Chery E3?

Chery E3 uses a dedicated electronic throttle body cleaner. Introduction to dedicated cleaner usage: If the dedicated cleaner is unavailable and carburetor cleaner is used instead, first spray the cleaner onto a clean soft cloth, then repeatedly wipe with the cloth to remove carbon deposits or sludge. After cleaning, perform the electronic throttle body self-learning procedure. Throttle body cleaning methods and precautions: The throttle body can be cleaned without disassembly, but the intake sealing areas must be thoroughly cleaned, and the idle speed control valve must be removed. The main purpose of throttle body cleaning is to remove carbon deposits, using specialized cleaning fluid or carburetor cleaner. These cleaners are highly harmful to humans, so gloves and masks must be worn during cleaning.
16
2
Share

Can Civic 8J wheels be installed?

They can be installed, but you may need to expand the wheel arches. This specification should fit just right with some adjustments. The 8J size looks great when installed. Civic Powertrain: In the development of the powertrain, the 1.5T turbocharged engine aims to maintain the current advantages in fuel efficiency, environmental performance, and acceleration. To achieve a satisfying acceleration experience for the driver, the matching between engine speed and accelerator pedal has been optimized, creating a more linear acceleration feel. Civic Acceleration Experience: By using a high-efficiency turbocharger, low-pressure loss boost piping, and changes in shift control, inertial losses are reduced, allowing for rapid acceleration when the throttle is pressed. With improvements in engine hardware and increased engine torque, along with refined engine and CVT calibration, faster and stronger acceleration has been achieved, delivering a powerful and delay-free acceleration experience.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.