Can a 16-year-old get a motorcycle license?

2 Answers
Queiroz
07/29/25 8:21am
16-year-olds cannot obtain a motorcycle license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the minimum age requirement for applying for a driving license is 18 years or older. Driving a motorcycle under the age of 18 will be treated as unlicensed driving, and if it causes serious traffic accidents, the corresponding compensation liability must be borne. There are three types of motorcycle licenses, with specific age requirements as follows: Light motorcycles: Applicants must be 18 years or older, with no upper age limit. Regular three-wheeled motorcycles: Applicants must be between 18 and 60 years old. Regular two-wheeled motorcycles: Applicants must be between 18 and 60 years old.
Was this review help?
4
2
Share
AshleyAnn
08/12/25 11:32am
I'm already in my thirties this year, and looking back, I also longed to ride a motorcycle when I was young. But at 16, it's basically impossible to get a regular motorcycle license—you usually have to be at least 18. The reason is simple: young people's reflexes and judgment aren't fully mature yet, and riding a motorcycle is too risky. If you're really interested, I suggest starting with an electric bicycle or a moped to get a feel for it and gain some road experience. At the same time, you can sign up for some traffic safety training courses to learn the rules and protective skills. Once you're old enough, you can enroll in a driving school for systematic training—that’s safer and more reliable. Don’t rush; be patient and build a solid foundation. That’s the key to riding confidently on the road in the future.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Can ECVT be driven aggressively?

ECVT cannot be driven aggressively under the premise of low fuel consumption. Here is some relevant information about ECVT: 1. ECVT is a continuously variable transmission, which refers to a transmission system that can continuously obtain any transmission ratio within the transmission range. The difference from a stepped transmission is that the transmission ratio is not an intermittent point but a series of continuous values, thereby achieving good economy, power, and smooth driving, while also reducing emissions and costs. 2. In the ECVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt.
15
4
Share

What is the SR motorcycle?

SR refers to the CFMoto 250SR motorcycle. Here are the relevant details about the 250SR motorcycle: 1. Body Dimensions: The motorcycle measures 2010mm in length, 750mm in width, and 1080mm in height, with a wheelbase of 1360mm. 2. Engine: It is equipped with a single-cylinder, four-stroke, liquid-cooled 250cc engine, delivering a maximum horsepower of 27.9ps, a maximum power of 20.5kw, and a maximum torque of 22nm. The valve configuration is DOHC with four valves per cylinder, and it operates on a four-stroke cycle. 3. Configuration: The CFMoto 250SR has a seat height of 780mm, is matched with an international 6-speed transmission, has a curb weight of 165kg, a fuel tank capacity of 12L, liquid cooling, electronic fuel injection, and requires 95-octane fuel.
14
2
Share

What is the Difference Between a Rearview Mirror and a Side Mirror?

There is no difference between a rearview mirror and a side mirror. Rearview mirrors are divided into the central rearview mirror, the left side mirror, and the right side mirror. The term "side mirror" is a general name for rearview mirrors in different positions. Below is a related introduction to rearview mirrors: 1. Central rearview mirror: Position it horizontally in the middle and align it with the left ear. 2. Left side mirror: When adjusting the up and down positions, place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's surface. 3. Right side mirror: When adjusting the up and down positions, leave a larger area for the ground, occupying about 2/3 of the mirror's surface.
6
4
Share

Where is the spare tire for the 2008 BMW X5?

2008 BMW X5's spare tire is located under the trunk floor. Here is some related knowledge about the spare tire of the 2008 BMW X5: Spare tire size: The spare tire of the 2008 BMW X5 is a non-full-size tire, with slightly smaller diameter and width compared to regular tires. Speed limit for spare tire: The maximum speed should not exceed 80 km/h. It can only be used as a temporary replacement and should only be installed on non-drive wheels. Spare tire inspection: Mainly check the tire pressure and look for any wear or cracks. Spare tire replacement time: Generally, tires have an aging period of about 4 years, so the spare tire should be replaced after 4 years.
6
2
Share

What Decibel Level of Car Noise is Considered Disturbing?

Car noise above 60 decibels is considered disturbing. Noise is the sound produced by irregular vibrations of an object, which can cause irritability and pose health risks when the volume is too high. Methods to Improve Car Noise: Engine noise, road noise, and tire noise are all structural noises primarily caused by vibrations. The most effective solution is vibration damping. Adding damping plates combined with sound-absorbing pads can effectively reduce road noise and tire noise. Road noise and tire noise result from friction between the tires and the road surface, generating vibrations and noise. Therefore, vibration damping is the best approach. Comprehensive application of damping plates or specialized damping plates, sound-absorbing pads, and door seals on the fenders, floor, and doors can address tire and road noise at three sources: vibration damping, sound absorption, and sound insulation. Wind noise occurs when wind pressure exceeds the sealing resistance of the doors. Thus, enhancing sealing resistance is the most direct and fundamental solution. Door seals and inner seals can effectively resolve this issue.
5
4
Share

What is the reason for engine noise disappearing when the oil dipstick is removed?

It may be due to a damaged valve cover. The excessive crankcase exhaust gas caused by the vacuum valve inside the valve cover leads to the noise disappearing when the oil dipstick is removed. Below is a detailed introduction about automobile engines: 1. Automobile engine: The automobile engine is the device that provides power for the car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental performance. Depending on the power source, automobile engines can be divided into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid systems. 2. Advantages: Common gasoline and diesel engines are both reciprocating piston-type internal combustion engines, converting the chemical energy of fuel into the mechanical energy of piston movement and outputting power. Gasoline engines have high rotational speed, light weight, low noise, easy starting, and low manufacturing costs; diesel engines have a high compression ratio, high thermal efficiency, and better fuel economy and emission performance compared to gasoline engines.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.