
118-liter refrigerator cannot fit into a small car. Here is the relevant introduction about car refrigerators: Concept: A car refrigerator refers to a portable cooling box that can be carried in a car. There are mainly two types of car refrigerators on the market: one is a semiconductor car refrigerator, which works by electronic chip cooling; the other is a compressor car refrigerator, which uses traditional compressor technology from conventional refrigerators and can achieve lower cooling temperatures. Working principle: The compressor car refrigerator consists of components such as a compressor, condenser, dry filter, capillary tube, and evaporator. Its power comes from the compressor, the dry filter is used to filter dirt and dry moisture, the capillary tube is used for throttling and pressure reduction, and the heat exchangers are the condenser and evaporator.

Last time I helped a friend move, I transported a 118-liter refrigerator in my compact car without any issues. My car is an ordinary small vehicle with limited trunk space. After measuring, the fridge dimensions were approximately 50cm tall, 50cm wide, and 60cm deep. The trunk opening height was 45cm, so I loaded it diagonally and padded it with an old shirt to prevent shaking. The key is to accurately measure both the refrigerator's external dimensions and the car's trunk space - don't force it to avoid scratching the paint. Many modern compact cars have trunk heights between 40-60cm with sufficient depth, making them perfectly capable of handling small refrigerators. Before transport, it's best to remove the fridge door to reduce volume, and secure it firmly with foam padding to prevent damage from road bumps. My experience shows that as long as the dimensions match, transporting with a regular car is quite convenient - don't overcomplicate it.

Hey, let me share my experience on this. My compact sedan has moved several 118-liter refrigerators. Typically, they measure around 55cm in height, 55cm in width, and 55cm in depth. Most compact car trunks are wide enough, but height can be a limitation—like that one time I only had 48cm of clearance. In that case, I placed it diagonally on the back seat and secured it with seat belts. Always measure both the fridge and trunk dimensions first—accurate measurements are crucial. If it doesn’t fit, consider removing the fridge door or padding with soft cloth to prevent scratches. Most mini-fridges can fit, but handle with care to avoid damaging the interior. From daily experience, small cars often have more space than you’d think—don’t overthink it, just give it a try. Easy and stress-free!

Transporting a 118L refrigerator into a car mainly depends on size compatibility. The refrigerator's height, width, and depth usually range between 50-60cm, while the car trunk opening height is typically 40-55cm with a depth of 80-100cm. If the height is insufficient, try placing it in the rear seats—measure the dimensions first to avoid wasted effort. I recommend using anti-slip mats to secure it for safety and driving smoothly to prevent collisions. In most cases, it's feasible, but some smaller cars might not accommodate it—don't force it to avoid damaging the car or refrigerator; consider alternative methods for better safety.

Be cautious when placing a refrigerator in a small car. A 118-liter refrigerator is not large in size, and most small cars can accommodate it, but the height of the trunk may easily get stuck. Like last time, I measured a refrigerator that was 50cm tall, but the car's trunk opening was only 45cm high, so I couldn't close the door and had to give up. Instead, I used ropes to tie it to the roof, but that was risky. It's best to first measure the refrigerator and the interior dimensions of the car to ensure a proper fit. If they don't match, don't force it. During transportation, prevent electric shocks and handle it gently. If you're unsure, renting a small truck is safer, more professional, and worry-free, avoiding unexpected losses.


