Can 92 octane unleaded gasoline be used if the requirement is above 92 octane?

Is the Tenth Generation Accord China 6 Compliant?

The tenth generation Accord is China 6 compliant. China 6 refers to the National Sixth Stage Emission Standards for Motor Vehicles, which are established to implement the Environmental Protection Law and the Air Pollution Prevention and Control Law, aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The tenth generation Honda Accord is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter naturally aspirated engine. The model equipped with the 2.0-liter naturally aspirated engine is a hybrid variant, featuring a 184-horsepower electric motor. The high-power version 1.5-liter turbocharged engine has a maximum power output of 143 kW, while the low-power version 1.5-liter turbocharged engine delivers 130 kW. The 2.0-liter naturally aspirated engine produces a maximum power of 107 kW. All three engines are equipped with i-VTEC technology and utilize aluminum alloy cylinder heads and blocks.

11

1

Share

What does it mean when the tire pressure yellow light on the dashboard comes on?

The illumination of the tire pressure yellow light on the dashboard indicates abnormal tire pressure. The tire pressure monitoring indicator is a yellow symbol, resembling an irregular circle without a seal, with four small spikes at the bottom and an exclamation mark inside. There are generally three reasons for the tire pressure warning light to come on: Abnormal tire pressure: It usually triggers an alarm when the pressure is below 1.8 bar or exceeds 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed directly inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, it can also cause the tire pressure warning light to come on. For sensor damage issues, the only solution is to replace it with a new component.

10

5

Share

How to Check if Brake Pads Need Replacement

Here are specific methods to determine whether brake pads need replacement: 1. Check the thickness. Generally, new brake pads are about 1.5 cm thick. If they are worn down to one-third of their original thickness, or less than 5 mm, it is recommended to replace them promptly. 2. Listen for sounds. If you hear a metallic scraping noise when braking, this may indicate that the brake pads have worn down to their minimum thickness, causing the wear indicators on the sides of the pads to scrape against the brake disc, producing noise. Immediate replacement is necessary. 3. Look for warnings. Some vehicle models have brake wear indicators. If the brake pads are excessively worn, the sensor wire will come into contact with the brake disc, causing a change in resistance and generating an electrical current. This triggers a signal, and a brake pad warning light will appear on the dashboard. 4. Rely on feel. If the brake pedal feels lighter than usual, or if braking feels difficult or ineffective, this indicates severe wear and insufficient thickness of the brake pads, requiring prompt replacement.

5

Share

What does the TC with a slash on the dashboard mean?

When the dashboard displays TC with a slash, it indicates that the traction control is turned off. Here are the reasons why the TC with a slash indicator light comes on and the corresponding solutions: 1. Reasons: ① The traction control switch is turned off ② Driving too fast in rain or mud ③ Issues with the traction control system ④ Solenoid valve malfunction ⑤ Dirty engine oil clogging the solenoid valve filter ⑥ Oil pressure leakage due to wear of actuator gears and impellers, triggering the warning ⑦ Dirty throttle body with opening reaching 20%, causing the engine computer to misjudge a TC fault 2. Solutions: ① Press the button again (hold for more than 5 seconds) ② Restart the vehicle

15

2

Share

Does sleeping in the car with the air conditioning on affect the car?

Sleeping in the car with the air conditioning on in summer has little impact on the car except for increasing fuel consumption. However, it may pose certain dangers to the people inside the car, as sleeping in a car with the engine running can lead to carbon monoxide poisoning. Here are some relevant details: 1. Whether the car air conditioning is suitable directly affects the comfort of the driver and passengers. If the air conditioning is kept at a low temperature for a long time, the endocrine system of the people inside may not adapt immediately, affecting their health and potentially leading to colds, fevers, and various symptoms; 2. Moreover, low temperatures can also damage the compressor of the air conditioning unit. Normally, the optimal temperature is around 24-27°C. The car air conditioning actually has many functions, not only regulating the temperature inside the car but also heating or cooling to keep the interior temperature within a certain range; 3. Additionally, the air conditioning can also disperse moisture, humidify dry air, and create a more comfortable environment. It can also intake fresh air, providing ventilation. When using the air conditioning for extended periods, it is essential to clean it regularly to prevent excessive dust buildup, which can lead to dirt accumulation and mold formation.

15

2

Share

Is CVT or AT More Durable?

AT transmissions are generally more durable than CVT transmissions. The differences between AT and CVT are as follows: 1. Principle: AT operates by using a torque converter whose automatic torque conversion range is limited. Therefore, multiple planetary gear sets are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears according to changes in engine operation, achieving automatic torque conversion. The construction of CVT's transmission pulley is quite unique, consisting of movable left and right halves that can move closer together or apart. The conical discs can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical discs move inward to tighten, the steel belt is pushed outward from the center by the discs, and vice versa. This changes the diameter of the disc driven by the steel belt, altering the gear ratio. 2. Usage: AT does not require a clutch for shifting, has fewer gears with significant changes, and provides smooth connections, making it easy to operate. This not only offers convenience to the driver but also ensures comfort for passengers. CVT lacks the transmission gears found in conventional automatic transmissions, eliminating the shifting process and the associated jerky sensation. As a result, CVT transmissions deliver linear power output, providing an exceptionally smooth driving experience.

7

0

Share

Can 92 octane unleaded gasoline be used if the requirement is above 92 octane?

Is the Tenth Generation Accord China 6 Compliant?

What does it mean when the tire pressure yellow light on the dashboard comes on?

How to Check if Brake Pads Need Replacement

What does the TC with a slash on the dashboard mean?

Does sleeping in the car with the air conditioning on affect the car?

Is CVT or AT More Durable?

Is the Alphard a Toyota-branded vehicle?

How to Remove Bubbles from Window Film?

How to Unmute the Audio System in the Tiguan L?

How to View 360-Degree Panoramic Images?