Can 9 points deducted from a driver's license be reduced through legal learning?

1 Answers
EllianaLee
07/28/25 10:57pm
Yes, 9 points deducted from a driver's license can be reduced through legal learning, with no restrictions on the type of driver's license or the permitted vehicle categories. According to Article 5 of the Notice issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), titled "Work Standards for Reducing Points of Road Traffic Safety Violations by Accepting Traffic Safety Education (Trial)": Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities based on their highest permitted vehicle category and meet relevant requirements to apply for point reduction. Legal learning for point reduction is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. By participating in online traffic safety learning and passing the examination, they can have their points reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific considerations are as follows: Applicable individuals: Motor vehicle drivers who hold a driver's license issued by the People's Republic of China, regardless of the permitted vehicle category or whether they are commercial vehicle drivers, can participate in legal learning for point reduction. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations based on their highest permitted vehicle category. Specific rules: For online learning of road traffic laws, regulations, and related content, each session requires continuous learning for 5 minutes. Within 3 days, the cumulative learning time must reach 30 minutes. Then, within 7 days, the driver can register for an examination. Passing the examination reduces 1 point. Drivers can also attend on-site learning sessions, with each session lasting no less than 1 hour. After completing the required learning hours, they can apply for an examination. Passing the examination reduces 2 points. Drivers can also participate in offline traffic safety public welfare activities, with each session lasting 1 hour, reducing 1 point per session. Within 3 days, the cumulative learning time must reach 30 minutes, with each session lasting no less than 5 minutes. Passing the examination reduces 1 point per session. The maximum point reduction in one scoring cycle is 6 points. Article 5 of the Notice issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), titled "Work Standards for Reducing Points of Road Traffic Safety Violations by Accepting Traffic Safety Education (Trial)" also states: Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities based on their highest permitted vehicle category and meet relevant requirements to apply for point reduction. Legal learning for point reduction is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. By participating in online traffic safety learning and passing the examination, they can have their points reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific considerations are as follows: Applicable individuals: Motor vehicle drivers who hold a driver's license issued by the People's Republic of China, regardless of the permitted vehicle category or whether they are commercial vehicle drivers, can participate in legal learning for point reduction. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations based on their highest permitted vehicle category. Specific rules: For online learning of road traffic laws, regulations, and related content, each session requires continuous learning for 5 minutes. Within 3 days, the cumulative learning time must reach 30 minutes. Then, within 7 days, the driver can register for an examination. Passing the examination reduces 1 point. Drivers can also attend on-site learning sessions, with each session lasting no less than 1 hour. After completing the required learning hours, they can apply for an examination. Passing the examination reduces 2 points. Non-acceptance cases: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more full-point records. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the use of forged or altered documents or license plates. The driver's license is in the probationary period or has not been reviewed on time. The driver has unresolved traffic violation records. The driver has a vehicle with an expired safety technical inspection or not deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.
Was this review help?
4
2
Share
More Forum Discussions

How many points can an A2 driver's license deduct without requiring study?

a2 driver's license requires study as long as it has points deducted. The specific situation is as follows: According to the new regulations: Starting from May 1, 2012, holders of A1, A2, B1, and B2 driver's licenses must participate in traffic safety study as long as there are point records. Annual review participation: Holders of A1, A2, B1, and B2 driver's licenses, in addition to submitting a physical condition certificate every two years, must also participate in an annual review every year. Different point deductions on the driver's license result in different study requirements. The specific situations are as follows: Less than 5 points: If there is a record of less than 5 points within one year, no less than 3 hours of traffic safety study is required. 6 to 11 points: No less than 12 hours of traffic safety study is required. Full 12 points: The driver's license will be confiscated on the spot, and the holder will be ordered to participate in a 7-day traffic safety study.
12
0
Share

Can I renew my A2 license on 12123 with 9 points deducted?

A2 license with 9 points deducted cannot be renewed on 12123. The specific situation is as follows: Reason: Deductions of 1-8 points can be processed for review on 12123, while 9-11 points require handling at the vehicle management office. Study requirement: If an A2 driver's license accumulates 9 points within the same cycle, the holder must complete a study session before the review. Information about A2 driver's license: Permitted vehicle types for A2 license: Tractor vehicles. A valid A2 license issued by China's public security traffic police vehicle management authority allows driving heavy and medium-sized full trailers and semi-trailer motor vehicle combinations. Other permitted vehicle types: Also allows driving vehicles permitted by B1, B2, C1, C2, C3, C4, and M licenses.
15
1
Share

Where is the car engine number located?

The engine number is generally found on the outer surface of the engine block, or on the vehicle's nameplate, the nameplate inside the engine compartment. You can also check the engine number on the car purchase invoice; the factory certificate includes the engine number; for commercial vehicles, the operation permit can be used to query the engine number; the vehicle purchase tax payment certificate contains the engine number; the public security authority's registration records have the engine number; the vehicle insurance card lists the engine number; it can also be found below the windshield directly in front of the driver's seat. The simplest and most direct method is to check the vehicle's administrative green book or the vehicle registration certificate. The engine number is like a person's ID number, representing each individual vehicle. It stores very important information about the vehicle. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or enterprise practices, and the engine's attributes, for a batch of identical products. It indicates information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including details like fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose passenger vehicles are marked with the professional manufacturer's name, model, and production number as required. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production number of the engine, with each engine having a unique number that cannot be duplicated. Composition of the car engine number: Front section: Includes the product series code, generation symbol, and regional or enterprise code, which the manufacturer can choose as needed, but must be approved and recorded by the industry standard's regulatory body. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Comprises symbols for structural features and usage characteristics. Tail section: Distinguishing symbols. When differentiation is needed within the same series due to improvements or other reasons, the manufacturer selects appropriate symbols to indicate this, with the rear and tail sections possibly separated by a hyphen.
10
0
Share

Where is the camshaft signal disc located on the 274 engine?

274 camshaft signal disc is located on the crankshaft flywheel. Below are the specific functions of the camshaft sensor: Ensure normal cylinder operation: Based on the cylinder's operating condition, the signal is transmitted to the ECU electronic control unit to perform sequential fuel injection control, ignition timing control, and knock control. Ensure accuracy of fuel injection and ignition: During startup, the engine ECU identifies the position and stroke of each cylinder piston based on signals from the camshaft position sensor and crankshaft position sensor, controlling the fuel injection sequence and ignition sequence for precise fuel injection and ignition control.
5
3
Share

Why does an electric car not move in rainy days despite having power?

The reasons why an electric car does not move in rainy days despite having power are as follows: Water ingress or poor contact in the controller: When the controller gets wet, it cannot receive power, causing the electric vehicle to fail to move or the rear wheel to lock; if the controller gets wet, it is necessary to promptly open the controller, dry it with paper or a cloth, wipe the circuit board with alcohol, and finally let it dry before sealing and testing it. If it still does not work, replace the controller immediately. Poor line contact: Loose battery connection wires or poor contact in the power lines. Check whether the battery terminals are corroded or loose. Water ingress in the battery: Insufficient power in the electric vehicle, water ingress in the battery can lead to insufficient discharge output current.
6
1
Share

What is the right-of-way sequence for vehicles at an uncontrolled intersection without traffic signals?

At intersections without traffic signs or markings, turning motor vehicles must yield to vehicles going straight. For vehicles approaching from opposite directions, those turning right must yield to those turning left. Vehicles facing traffic signs or markings should yield to the party with the right-of-way. Vehicles without traffic signs or markings must stop and look before entering the intersection, yielding to vehicles coming from the right. Additional relevant information is as follows: Straight-moving vehicles have priority: Turning motor vehicles must yield to straight-moving vehicles. Left-turning vehicles have priority: Right-turning vehicles from opposite directions must yield to left-turning vehicles.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.