Can 12123 Check If a Vehicle Is Mortgaged?

What are the new requirements for tires in annual inspections?

2021 annual inspection requirements for tires include checking the tread depth during the inspection. Below is an introduction to the latest 2021 annual inspection regulations: 1. Cancelled items: Power performance test, interior noise test, electronic parking brake test, headlight deviation test, suspension test, and speedometer error test. Among these, the exhaust emission test was basically done by the inspector flooring the accelerator. However, starting next year, the vehicle power test will be replaced with an OBD test, which is more convenient and less harmful to the vehicle. Tests like the suspension test and speedometer error test have been cancelled because, with industrial progress and improved vehicle quality, these tests are no longer deemed necessary. 2. Newly added items: Tire tread depth test, vehicle wheelbase test, and vehicle lifting device. The tire tread depth test has a relatively significant impact on car owners, as many do not develop the habit of regularly changing tires and continue to use aged tires, which reduces the friction between the tires and the road, increasing the risk of skidding and other dangerous situations.

17

0

Share

Where is the tire pressure reset button for the Arrizo 5?

Arrizo 5 does not have a tire pressure reset button and can only be reset manually. Here is the relevant information: 1. Power: The Arrizo is equipped with a straight-four engine with the model number SQRE4T15B, a displacement of 1498cc, a maximum power of 108kW/5500rpm, and a maximum torque of 210Nm/1750-4000rpm. This engine is also used in many other Chery models. 2. Body dimensions: The Emgrand measures 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. The Arrizo measures 4572mm in length, 1825mm in width, and 1482mm in height, with a wheelbase of 2670mm.

7

5

Share

What RPM is considered aggressive driving for a CVT transmission?

Generally, if the RPM exceeds 4000, it should be considered aggressive driving. Aggressive driving refers to operating a vehicle in a manner that does not follow standard procedures, such as driving at high speeds in low gear, driving at low speeds in high gear for extended periods, sudden braking and acceleration, not slowing down when turning, and performing stationary drifts, all of which fall under aggressive driving. Below are the hazards of aggressive driving: 1. Sudden acceleration: This can directly impact the engine, transmission, and vehicle body, especially during startup when a sudden press of the accelerator raises the engine RPM while the temperature and lubrication are insufficient, leading to increased engine wear and potential risks of engine seizure or cylinder scoring. 2. Sudden braking: This affects the braking system, accelerating the wear of brake pads and discs, as well as tire wear, which can result in reduced braking performance, longer stopping distances, and a higher likelihood of traffic accidents.

10

1

Share

What brand is rock-blade tires?

rockblade, known as Rock Blade in Chinese. The tire size is 225/50R/18. Qingdao Rock Blade Tire Co., Ltd. was established with investment and holding by Weifang Huadong Rubber Tire Co., Ltd., located in the beautiful coastal city of Qingdao, Laoshan District. When using rock-blade tires in daily life, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread pattern grooves of the tires gradually become shallow. If the patterns are worn flat, the tires will lose their drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be hidden dangers for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park the car near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this operation will accelerate tire wear. Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure will increase. At this time, you should stop to dissipate heat. It is strictly forbidden to release air for pressure reduction or splash water for cooling to prevent abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tires and the ground.

15

4

Share

How long can the BAIC EU300 last on a single charge?

The actual range of the BAIC EU300 can reach approximately 300km. The overall design of this vehicle hasn't changed much compared to the current model. The silver grille bars are connected to the central logo and accented with blue, representing its identity as a new energy vehicle. Relevant information about the vehicle's range is as follows: 1. Introduction: Vehicle range refers to the maximum distance that can be traveled with the remaining fuel in the tank at a fuel-efficient speed, mainly calculated by the car's computer based on current fuel consumption. 2. Influencing factors: The vehicle's range is affected by four factors: charging equipment, tire pressure, whether the vehicle is overtaking, and whether it frequently stops and starts abruptly.

8

4

Share

What is the sequence of the C2 Subject 2 driving test?

The sequence of the C2 Subject 2 test items is: reversing into a garage, parallel parking, driving through curves, and making a right-angle turn. Compared to the C1 manual transmission test, the hill start is omitted. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess the hill start and stop. Reversing into a garage is one of the more challenging items in the Subject 2 test, so many test centers place it as the first item. The key points for reversing into a garage are: the steering wheel's full-lock point, the 30 cm correction point, and the stopping point inside the garage. You must follow the prescribed route and sequence. The vehicle must be fully inside the garage without crossing any lines. Parallel parking focuses on aligning the front line of the garage with the rear wheel, spotting the rear corner in the side mirror, and maintaining the distance between the wheel and the left dashed line. There's no need to straighten the wheels after parking, but don't forget to use the turn signal when exiting. After parking, the vehicle body must not cross any lines, and the tires must not touch the lane boundaries during movement. Driving through curves, commonly known as the S-bend, is relatively easy for many students with good driving sense, as they can complete it intuitively. However, some students misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-bend is observing the position of the front hood's reference point relative to the edge lines. The wheels must not touch the road edges. The right-angle turn is even simpler, essentially a simplified version of exiting the garage in the reversing test. The method for finding the reference point is the same as exiting the garage—aligning the front hood's horizontal line with the front line (either exactly on the line or slightly delayed). Ensure the wheels do not touch the road edges. Generally, the C1 Subject 2 requires 16 hours of training, while the C2 Subject 2 requires 14 hours. Completing the required training hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not reduced. Additional test items require corresponding extra training hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail the Subject 2 test, you can retake it once. If you fail again, the test is terminated, and you must reschedule the test after 10 days. If you fail five consecutive test attempts (including retakes, totaling 10 attempts), all previously passed subjects will be invalidated, and you must start over from Subject 1.

4

3

Share

Can 12123 Check If a Vehicle Is Mortgaged?

What are the new requirements for tires in annual inspections?

Where is the tire pressure reset button for the Arrizo 5?

What RPM is considered aggressive driving for a CVT transmission?

What brand is rock-blade tires?

How long can the BAIC EU300 last on a single charge?

What is the sequence of the C2 Subject 2 driving test?

What does SJ10W-30 engine oil represent?

Are CVT Transmission Fluid and AT Transmission Fluid Interchangeable?

Where Can I Professionally Modify Car Seats?

What is the fuel consumption of the ES350?