Can 0w20 Engine Oil Be Used in Summer?

1 Answers
LaHenry
07/29/25 5:04pm
0w20 engine oil can be used in summer. 0w20 engine oil has high fluidity under both low and high temperatures, allowing it to circulate well within the engine. However, it is not suitable for all vehicle models, and due to its relatively low high-temperature viscosity, it is not recommended for aggressive driving as it may accelerate wear and tear on internal engine components and reduce engine performance. Below is some relevant information about engine oil: 1. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption within the engine. 2. Engine oil consists of base oil and additives. The base oil is the main component of the lubricant, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, imparting new characteristics and making them an essential part of the lubricant.
Was this review help?
3
0
Share
More Forum Discussions

How to Remove and Install the Turn Signal Light on the Teana Side Mirror?

Adjust the side mirror angle to the innermost position, leaving the maximum gap on the outermost side. Then use a plastic pry tool to gently pry the mirror. Apply slightly more force to the mirror. Continue prying until you see the clips behind the mirror. Use a flathead screwdriver to gently pry the clips. Start with the outermost clip, and the gap will widen. Then proceed to pry the remaining clips one by one. After prying all the clips, only two heating wires remain connected. Once the mirror is removed, you also need to take off the black outer shell, which is secured by several screws. After removing the black outer shell, there are two more screws inside. Then, detach the white shell of the side mirror and unplug the turn signal connector to replace it with a new turn signal light.
20
3
Share

How to Fix a Car Trunk That Won't Open?

First, remove the interior trim panel of the trunk, which is secured by clips. Simply release the clips to remove it. Next, dismantle the trunk door switch trim panel. Start by removing the screws and clips on the back metal panel of the trunk. Then proceed to remove the middle two screws, followed by the right side. Once the fastening method of the trunk door switch trim panel is undone, you may notice that the switch core has become detached. This prevents the switch handle from opening the trunk. Reinstall and secure the switch core to resolve the issue. Additionally, you can fold down the rear seats, enter the trunk, and manually open the interior trim panel. Then, pull the unlocking lever by hand to unlock the trunk manually.
6
0
Share

How to Switch to Chinese in Volkswagen CC?

Press the one-touch start button located in the center console armrest area to power on the system for adjustments. Press the SET button on the left side of the multifunction steering wheel to access the setup menu. Press the "+" button on the left multifunction keypad to display multiple function options. When the Chinese/English language switch option appears on the instrument cluster, select the Chinese option. Finally, press the OK button on the left side of the multifunction steering wheel to confirm the operation and complete the process.
1
0
Share

What to Do When the ABS Light Comes On in a Car?

Confirm the fault condition and symptoms, conduct a visual inspection of the system to check for brake fluid leaks, damaged wires, loose connectors, etc. Read the fault codes, which can be done directly with a decoder or by reading the fault codes through the warning light and then referring to the repair manual. Use necessary tools and instruments to conduct an in-depth inspection of the faulty area, diagnose the exact location and cause of the fault, and clear the fault codes. Check if the warning light remains on. If the warning light continues to stay on, it may indicate that there is still a fault in the system that requires timely repair.
8
4
Share

How to Adjust a Car Speed Limiter?

Press the "Speed" button for 1 second to enter the speed limit setting, displaying "C000", then press "C080" or "C060" to increase or decrease. Use the CH1 and CH2 buttons on the remote control to adjust the speed, with corresponding voice prompts. Use the CH3 and CH4 buttons on the remote control to adjust the 10-meter pulse speed. For automatic learning, press the CH3 button to enter the pulse speed setting, and the vehicle will start running 10 meters from the starting point. The car speed limiter uses microcomputer program control, effectively controlling the vehicle's maximum driving speed without affecting the original car power.
15
5
Share

How to Handle Regular Vehicle Inspection Services?

For the annual inspection, you need to prepare the vehicle license, the original copy of the valid compulsory traffic accident liability insurance policy for the current year, and the original ID card of the owner. To apply for the annual inspection, you must make an appointment in advance, and the earliest you can go is the next day. There are two ways to make an appointment: by phone or online. According to the scheduled time, go to the designated vehicle management office, fill out the vehicle inspection mark application form, take a number, and then proceed with the inspection. The vehicle must pass regular inspections such as exterior appearance and exhaust emission tests, and only with no violation records can the inspection pass mark be issued.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.