C-IASI Crash Test Results of Hongqi HS5?

1 Answers
LoganAnn
07/29/25 1:43pm
Hongqi HS5 C-IASI crash test: No test results available. The following is an introduction to the Hongqi HS5: 1. Exterior: The Hongqi HS5 features a vertical waterfall-style grille design, which is very wide. The grille is accented with a red trim in the middle, complemented by the iconic emblem on the hood, giving the front fascia a very imposing presence. 2. Rear: The taillights on both sides are connected by a chrome strip, with the characters "Hongqi" placed above the chrome strip. The rear also features dual exhaust pipes. 3. Interior: The dashboard adopts a large continuous screen design, along with a touch-sensitive air conditioning control panel, an electronic gear shifter, and continuous air vents, creating a strong technological atmosphere overall.
Was this review help?
19
0
Share
More Forum Discussions

What causes the sunroof leakage in the Emgrand GS?

Long-term lack of maintenance leads to aging of the sunroof sealing strip. Common causes of sunroof leakage in cars: Prolonged lack of maintenance causes the sunroof sealing strip to age; driving on bumpy roads with the sunroof fully open can lead to excessive vibration between the sunroof and the sliding rails, causing component deformation; clogged drainage pipes. Maintenance methods: Regularly check the condition of the sunroof rails; reduce the frequency of sunroof use; avoid opening the sunroof when the car is cold in winter; check the drainage status of the sunroof before the rainy season. Replace the sunroof sealing strip; clean small sand particles and dust from the sunroof drainage channel; ensure the sunroof is properly closed; unclog the drainage pipes. The function of a car sunroof is to provide ventilation.
20
3
Share

What is the Heart of a Car?

The heart of a car is the engine. How a car engine works: It generates kinetic energy by burning fuel inside the cylinders, driving the pistons within the engine cylinders to move back and forth. This movement drives the connecting rods attached to the pistons and the crankshaft connected to the rods, performing reciprocating circular motions around the crankshaft center, thereby outputting power. Car engine maintenance tips: Use fuel that meets the specified standards. The quality of the fuel significantly impacts the combustion in the engine. Poor-quality gasoline can cause a large amount of carbon deposits and gum to form in the combustion chamber, fuel injectors, intake passages, and valves, leading to unstable idling and difficulty accelerating, among other issues. When starting the engine in a cold state, it is necessary to warm up the engine appropriately. At normal operating temperatures, the engine's components experience optimal operational resistance, wear, and stability.
7
1
Share

Can You Drive with a Brake Light Malfunction?

If the electronic parking brake system malfunctions, the vehicle should not continue to be driven. Below is a detailed introduction to the electronic parking brake system: 1. Compared to Lever Handbrakes: The electronic parking brake system replaces traditional mechanical levers and tire cables, substituting the conventional lever handbrake with an electronic handbrake button. It is safer than traditional lever handbrakes, as the braking effect is not influenced by the driver's force, turning the traditional lever handbrake into an easily accessible button. 2. Main Applications: The electronic parking brake system is primarily used in tractors and cargo trucks. The electronic parking brake energy-saving system is equivalent to the engine having a three-gear selection button, allowing free selection based on different road conditions and load capacities. This keeps the engine operating within the optimal fuel economy range, achieving fuel-saving effects.
18
1
Share

What is the correct way to use hazard warning lights?

The correct usage of hazard warning lights is as follows: 1. When driving in foggy conditions, due to reduced visibility, you should not only turn on the hazard warning lights but also activate the fog lights to alert other vehicles. 2. In case of vehicle breakdown or traffic accidents on the road, hazard warning lights should be turned on to warn passing vehicles for safety. On highways, failure to use lights and set up warning signs properly after a breakdown or accident will result in a 12-point penalty. 3. When towing a malfunctioning vehicle, both the towing vehicle and the towed vehicle should turn on the hazard warning lights to indicate their abnormal status. 4. When temporarily parked on the road, turn on the hazard warning lights to alert other vehicles. 5. When forming a convoy as permitted by traffic authorities, all vehicles in the convoy should activate their hazard warning lights.
18
4
Share

What are the common transmission faults of Honda CR-V?

Common transmission faults of Honda CR-V include: 1. Accumulation of dirt and impurities inside the valve body, forming blockages that prevent effective regulation of oil pressure; 2. Transmission overheating, which can degrade the quality and friction characteristics of automatic transmission fluid, leading to sludge buildup inside the transmission, causing jerking and impact. If the temperature exceeds 120 degrees, rubber sealing materials may begin to harden or hydraulic pressure may decrease. Below is more information about the 2021 Honda CR-V 240TURBO manual two-wheel-drive classic edition: 1. It is a compact 5-door, 5-seat SUV with dimensions of 4621mm in length, 1855mm in width, and 1679mm in height. 2. It has a wheelbase of 2661mm, equipped with a 6-speed manual transmission, and the engine delivers a maximum torque of 243 Nm and a maximum horsepower of 193 hp.
14
3
Share

Do You Need to Replace the Control Arm When the Control Arm Bushing is Worn Out?

Do You Need to Replace the Control Arm When the Control Arm Bushing is Worn Out. Lift the vehicle: Remove the control arm bushing, then remove both ends of the control arm. Select two corresponding size metal sleeves and install the purchased bushing. The larger ones are left and right specific, marked with (L or R). Remove the old control arm: Then proceed with disassembly to remove the screws. This is the removed bushing, which falls off with a gentle pull, indicating quality issues. It may cause drumming sounds, front and rear tire play, accelerate the wear of the small tie rod, and thus affect the stabilizer bar and shock absorber. Install the new control arm: Apply dish soap to the new control arm bushing for lubrication to facilitate installation. Other lubricants that do not corrode rubber can also be used, but engine oil should not be used.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.