···
Log in / Register

BYD Song Tire Specifications?

5 Answers
AxelFitz
07/28/25 1:21pm

The wheel rims are 18 inches, with a tire width of 225 mm, sized at 225/60R18. Tires can also be used in 17-inch and 19-inch sizes. More information about wheel rims is as follows: 1. The wheel rim is the rotating part of the wheel steel inside the tire connected by columns to the wheel hub, which is the metal component mounted on the axle that supports the tire. It is also called the wheel ring, steel ring, wheel, or tire bell. Wheel rims come in various types based on diameter, width, manufacturing method, and material. 2. The surface treatment process of wheel rims can be done in different ways, generally divided into painting and electroplating. For ordinary vehicle models, the appearance of wheel rims is less considered, with good heat dissipation being a basic requirement. The process mostly uses painting treatment, which involves spraying followed by electric baking, offering cost-effectiveness, bright colors, and long-lasting durability. Even when the vehicle is scrapped, the color of the wheel rims remains unchanged. Many popular vehicle models use painted wheel rims. Some fashion-forward and dynamic colored wheel rims also utilize painting technology. These types of wheel rims are moderately priced and come in a full range of specifications. Electroplated wheel rims are further divided into types such as silver electroplating, water electroplating, and pure electroplating.

Was this review help?
16
0
Share
SanGabriella
08/11/25 6:00pm

I quite like the BYD Song. For specific tire parameters, check the model. For example, the standard version of the Song Pro DM-i uses 225/60 R18 tires, where the numbers mean 225mm width, 60% aspect ratio, and 18-inch wheel diameter. The full-size spare tire is also of this specification. However, configurations vary greatly—the high-performance version may come with 235/50 R19 tires, while the Song Plus EV model even uses 255/45 R20 tires. It’s best to check the vehicle manual or official website when purchasing. Tire parameters not only determine aesthetics but also affect comfort and handling—higher aspect ratios offer better cushioning but slower response, while wider tires provide stronger grip but may consume more fuel. Don’t overlook tire pressure: generally, front tires should be 2.2-2.5 bar, with rear tires slightly higher by 0.1 bar. Check weekly to avoid uneven wear, which can save fuel and improve safety. If you often drive on bumpy roads, consider switching to all-terrain tires for better durability.

Was this review help?
8
5
Share
Expand All
DelAubree
09/28/25 8:31am

As someone who frequently works on cars, I'm very familiar with the tire specifications of the BYD Song. The base model typically uses 215/65 R16 tires, while the new Song Pro commonly comes with 225/55 R18 tires. These numbers indicate a width of 215mm, an aspect ratio of 65%, and a wheel diameter of 16 inches. The key is to regularly check the tread depth - replace them immediately if it wears below 1.6mm, otherwise you risk hydroplaning in wet conditions. For tire brands, consider Michelin or Goodyear, preferably with a TREADWEAR index above 400 for better durability. Specifications matter greatly - low-profile tires offer agile handling but are more puncture-prone, while wider tires provide stability at the cost of higher noise. I recommend checking tire pressure every two months and adjusting it when cold to extend lifespan and ensure safety, especially before long trips. When replacing tires, remember to rotate their positions to balance wear. Avoid used tires as incorrect sizing can damage the suspension system.

Was this review help?
20
0
Share
Expand All
LeEllie
11/12/25 3:38am

I've been driving the BYD Song for half a year. The tire parameters of my car are 215/60 R17, clearly stated on the label—215 is the width in millimeters, 60 is the aspect ratio percentage, and 17-inch rims. This specification is practical enough, providing a comfortable daily commute without excessive bumpiness and moderate fuel consumption. However, there are significant differences between different models, as the Song Pro comes with 225/60 R18 tires. Tire selection is crucial, as incorrect sizes can lead to inaccurate speedometer readings or safety issues. I check the tire pressure myself every month, maintaining it around 2.3 bar. Don't wait for the warning light to come on before taking action; developing this habit can prevent blowout accidents. When replacing tires, choose the same specifications and avoid random modifications, as this could affect the warranty and handling. For winter, use snow tires with the same parameters but deeper treads for better traction.

Was this review help?
16
0
Share
Expand All
Jeremiah
01/02/26 5:21am

Hi, what about the tire specifications for the BYD Song? The basic models like the regular Song use 215/65 R16, while the higher-end versions upgrade to 225/60 R18—the numbers represent the width, aspect ratio, and size. For those into modifications like me, I prefer switching to cooler, wider tires like 235/50 R19 to enhance both appearance and performance. Choosing the right parameters isn't just about looking good; it's also about safety. Too narrow, and the tires may skid; too wide, and they consume more fuel but offer better grip. It's recommended to buy tires with the original specifications for your car model. For brands, domestic Chaoyang or joint-venture Bridgestone offer good value for money. Keep an eye on tire pressure with an app reminder, maintaining it within the 2.2-2.4 bar range for longer tire life. During maintenance, have the balance checked to avoid strange noises. Don't upgrade randomly—significant size differences may cause rubbing against the wheel arches.

Was this review help?
10
2
Share
Expand All
More Forum Discussions

can you drive a left hand car in india

Yes, you can legally drive a left-hand drive (LHD) car in India, but it is subject to specific regulations and is generally not practical for daily use. India follows the Right-Hand Traffic (RHT) system, meaning vehicles are designed to be driven on the left side of the road, with the driver's seat on the right-hand side (RHD). LHD vehicles are a rare exception, typically allowed only for diplomatic personnel or as temporary imports by foreign tourists under a Carnet de Passages . The primary challenge is safety. An LHD vehicle's visibility is severely compromised on Indian roads. Overtaking slower vehicles like trucks or auto-rickshaws becomes extremely hazardous because you cannot see oncoming traffic clearly. This significantly increases the risk of head-on collisions. Furthermore, navigating toll booths, making tight turns, and interacting with roadside vendors will be awkward and frustrating. If you are considering this, you must navigate a complex bureaucratic process. For a permanent import, you'll need approval from the appropriate transport authority, which can be difficult to obtain. The vehicle may also need to comply with India's Bharat Stage (BS-VI) emission norms. Insurance companies may charge higher premiums or be reluctant to provide coverage due to the perceived higher risk. For the vast majority of drivers, purchasing or renting a standard RHD vehicle is the safer, more convenient, and legally straightforward choice.
4
5
Share

can you drive with propane tank in car

Yes, you can transport a propane tank in your car, but strict safety rules must be followed to avoid the risk of explosion or fire. The primary concern is propane leaking from the tank and accumulating inside the enclosed vehicle cabin, creating a highly flammable gas mixture. For this reason, transportation is only safe under specific conditions. The most critical rule is to never transport a propane tank inside the passenger compartment of a car, SUV, or van. An enclosed space allows gas to build up to dangerous levels from even a small leak. The tank must be secured upright in the trunk of a car or the cargo area of an SUV, but only if there is a way for vapors to escape, such as by rolling down the windows. The absolute safest method is to place the tank upright in the bed of a pickup truck, away from direct sunlight and heat sources. Transportation Factor Safe Practice Rationale Tank Location Trunk or cargo area with ventilation; pickup truck bed is ideal. Prevents gas accumulation in the passenger cabin. Tank Position Always upright and secured to prevent rolling. Ensures the pressure-relief valve functions correctly. Valve Status Tightly closed, with a protective cap or plug installed. Eliminates the primary source of potential leaks. Trip Duration Directly to and from the point of use; avoid leaving in a hot car. Minimizes exposure to temperature changes that increase internal pressure. Tank Condition DOT-approved cylinder, within its requalification date (typically 12 years). Guarantees the tank meets modern safety standards. Before you leave, double-check that the tank’s service valve is fully closed. Use a strap or bungee cord to secure the tank upright so it doesn’t tip over during transit. For small, disposable 1-pound cylinders used for camping, the same rules apply—transport them upright and secured, not loose in the cabin. The goal is to minimize any risk, no matter how short the trip.
4
1
Share

can you drive a car without a manifold

Yes, you can technically start and drive a car a very short distance without an exhaust manifold, but it is extremely dangerous, damaging to the engine, illegal, and should only be considered a last-resort measure to move a disabled vehicle a few feet, like onto a tow truck. The exhaust manifold is the first component of the exhaust system, bolted directly to the engine's cylinder head. Its primary function is to collect hot, toxic exhaust gases from each engine cylinder and funnel them into a single pipe. Without it, these high-pressure, scorching gases (often exceeding 1,200°F) are expelled directly into the engine bay. This creates immediate and severe risks: a high potential for igniting flammable materials (like brake fluid, wiring, or debris), significant engine performance issues due to the loss of backpressure (a controlled resistance in the exhaust system necessary for optimal engine efficiency at low RPMs), and the release of deadly carbon monoxide into the cabin. The oxygen sensors that provide critical data to the engine's computer ( ECU ) are typically located in the exhaust manifold. Running without it will trigger persistent check engine lights and cause the ECU to default to a "limp mode," resulting in poor fuel economy, rough idling, and a severe lack of power. Furthermore, the uncontrolled escape of exhaust disrupts the function of the catalytic converter, leading to its rapid failure and ensuring your vehicle will fail an emissions test. Legally, driving without a properly functioning exhaust system violates Department of Transportation regulations regarding noise and emissions in all 50 states. Aspect With Functional Manifold Without Manifold Engine Bay Temperature Normal operating range (190-220°F) Extreme heat (600°F+) Cabin Air Quality Safe, sealed system Risk of carbon monoxide poisoning Engine Performance Optimal power and fuel economy Rough idle, loss of power, poor mileage Exhaust Sound Controlled, muffled Extremely loud (110+ decibels) Check Engine Light Off (when no issues) On (O2 sensor errors) Legal Compliance Compliant with DOT/EPA standards Violation of noise and emissions laws Fire Hazard Minimal Severe
5
1
Share

can you drive a car with out a cv axle

No, you should not drive a car without a CV axle. Attempting to do so is extremely dangerous and will cause immediate, severe damage to your vehicle. The CV axle (Constant Velocity axle) is a critical drivetrain component that transfers power from the transmission to the drive wheels. Without it, the vehicle cannot be powered. If an axle breaks while driving, you'll lose power to the wheels, and transmission fluid will leak out, potentially leading to a complete transmission failure. The immediate risks are significant. The wheel on the side of the broken axle will have no control, which can make the vehicle difficult or impossible to steer safely. Furthermore, with the axle removed, the wheel may detach from the vehicle, causing a catastrophic accident. Even moving the car a very short distance, like out of a garage, is not recommended as it can damage the wheel bearing and other suspension components. The only possible exception is for a professional mechanic performing a specific repair that requires briefly rotating the transmission output shaft with the car elevated and off, but this is not "driving" in any sense. For any on-road movement, the car must be towed. Potential Consequence Estimated Repair Cost (Beyond Axle Replacement) Likelihood Transmission Damage from Fluid Loss $1,500 - $4,000+ High Wheel Bearing Failure $300 - $600 High Damage to Suspension Components $500 - $1,500+ Moderate Wheel Detachment & Accident Incalculable (Safety Risk) Low, but catastrophic The safest and most cost-effective action is to have the vehicle towed to a repair shop. Driving without a CV axle turns a relatively inexpensive repair into a very expensive and dangerous situation.
20
5
Share

can you drive a car without a downpipe

Yes, you can technically drive a car without a downpipe, but it is not safe, legal, or advisable for more than a very short distance , such as moving the car a few feet in a repair shop. The downpipe is a critical component that connects the exhaust manifold or turbocharger to the rest of the exhaust system. Driving without it immediately creates several major problems. The most obvious issue is the deafening exhaust noise . With the exhaust gases exiting directly under the engine bay, the sound will be extremely loud, potentially violating local noise ordinances and drawing unwanted attention. More critically, it poses a serious safety hazard. Those hot, toxic gases, including deadly carbon monoxide, can be forced into the passenger cabin through the cabin air intake or open windows, creating a severe health risk. From a mechanical standpoint, your car's engine relies on a complex network of sensors to run efficiently. The primary oxygen (O2) sensors are typically located in the downpipe. Without it, these sensors cannot read exhaust gas composition, causing the engine control unit (ECU) to go into a "limp mode." This results in poor performance, rough idling, significant loss of power, and drastically reduced fuel efficiency. On modern turbocharged engines, the lack of a downpipe can also damage the turbocharger due to improper pressure regulation. Furthermore, driving without a downpipe means your vehicle has no catalytic converter , which is integral to the downpipe in most modern cars. This makes the vehicle illegal to operate on public roads in the U.S. due to EPA emissions standards. You will fail any emissions test, and the check engine light will be permanently illuminated. The only scenario where operating a car without a downpipe is acceptable is during immediate, off-road repair or diagnosis. For any street driving, a properly functioning exhaust system is non-negotiable.
16
3
Share

can you drive a car without a flywheel

No, you cannot drive a standard road-going car without a flywheel. The flywheel is a critical component bolted to the rear of the crankshaft, and its primary function is to store rotational energy, or inertia. This inertia is essential for smoothing out the engine's power pulses, allowing for stable idling and seamless gear changes in a manual transmission. Without it, the engine would likely stall as soon as you engaged the clutch or came to a stop. In a manual transmission vehicle, the flywheel also provides the friction surface for the clutch disc to engage against. Removing it would make it impossible to disengage the engine from the transmission, meaning the car would lurch forward as soon as you started it. In an automatic transmission, a similar but often lighter component called a flexplate serves the same basic purpose of connecting the engine to the torque converter. While some specialized racing engines, like those in top-fuel dragsters or certain formula cars, use extremely lightweight or non-traditional flywheels, these are engineered as complete systems with specific goals (like rapid acceleration) and are not practical or safe for daily driving. For any consumer vehicle, the absence of a flywheel would lead to catastrophic drivability issues and severe engine damage. Engine Performance Aspect With Flywheel Without Flywheel Engine Idle Stability Smooth and consistent Extremely rough, prone to stalling Clutch Engagement (Manual) Gradual and controllable Impossible or violently jarring Low-Speed Drivability Manageable and smooth Nearly impossible to control Crankshaft Stress Dampened and balanced Excessive torsional vibration, risk of failure Overall Vehicle Safety Safe for road use Unsafe and undrivable
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.