BYD F6 Tire Model Specifications?

2 Answers
LeAna
07/24/25 7:23pm
The tire model for BYD F6 is 205/65R15. The first number 205 indicates the tire width is 205MM, 65 represents the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 denotes the rim diameter is 15 inches. The middle letters or symbols have special meanings: "X" stands for high-pressure tire; "R" and "Z" indicate radial tires; "-" represents low-pressure tires. The BYD F6 has a maximum speed of 175km/h and a fuel consumption of 8.2L per 100km. In addition to the model, the following common data are also marked on the tire: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
Was this review help?
9
1
Share
NorahAnn
08/11/25 10:44am
I drove a BYD F6 for several years, and the original tire size was 205/60 R16. This size provides excellent stability, especially during lane changes on the highway, thanks to its strong grip. In the tire specification, 205 indicates a tread width of 205 millimeters, 60 is the aspect ratio percentage, and 16 is the wheel diameter in inches—a balanced, comfort-oriented design suitable for daily commuting. Personally, I’ve replaced the tires twice: the first time with the factory Goodyear tires, which felt durable but a bit noisy; the second time, I upgraded to Michelin Energy Saver series, which, though more expensive, offered better fuel efficiency and quieter performance. For maintenance, I recommend checking the tire pressure monthly and keeping it around 2.3 bar to avoid uneven shoulder wear. During the rainy season, pay extra attention to the tread depth; if it’s below 3mm, it’s time to replace them—safety first. Overall, these tires are quite economical and practical, so avoid upsizing unnecessarily to prevent increased fuel consumption.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

How many kilometers can Chaowei Battery run?

Chaowei Battery has a theoretical driving range of approximately 56 kilometers. Below is relevant information about Chaowei Battery: Introduction: Chaowei Battery is a product under Chaowei Group. Its product line includes batteries for electric power-assisted vehicles, electric road vehicles, electric vehicles, solar and wind energy storage batteries, lithium batteries for electric bicycles, and Jin Chaowei batteries. Features: Ultra-long range, new processes and formulations with high utilization rate of active materials, substantial weight; rapid start-up, patented direct-connection cast-welding technology that reduces internal resistance and improves heat dissipation; cadmium-free formulation, patented colloidal electrolyte technology that improves sulfuric acid stratification and lead ion dissolution; ultra-high cold resistance, enhanced negative electrode process with significantly improved low-temperature performance.
2
3
Share

What Causes Water in the Jetta Trunk?

Jetta trunk water causes are detailed as follows: Damaged Sealing Strip: The waterproofing of various parts of the car body is ensured by sealing strips. These rubber strips have a certain degree of strength and hardness, and do not deform under certain pressure conditions. However, prolonged exposure to external air can cause natural aging of the rubber, and high frequency of use can lead to wear and tear. Once the sealing strip is damaged, water can easily seep in. Trunk Deformation: The design of the car trunk follows specific rules, with corresponding drainage curvature designs in the A, B, C, and D zones. If the trunk's shape is compromised, severe water leakage can occur during rain.
20
2
Share

What to Do When the Other Party at Fault in a Rear-End Collision Keeps Avoiding Responsibility?

Here are the steps to take when the other party at fault in a rear-end collision keeps avoiding responsibility: Call the police: Traffic police will investigate the scene and issue an accident liability determination report. It doesn't matter if the other party signs it or not, but you must obtain this document. Have both insurance companies involved: If the other party refuses to compensate, the simplest method is to use the insurance company's subrogation service. In short, you can ask your own insurance company to advance the repair costs, and then the insurance company will sue the other party. You only need to cooperate by providing evidence. The prerequisite is that you must have purchased vehicle damage insurance; otherwise, you cannot enjoy the subrogation service. Using subrogation will not be counted as a claim and will not affect next year's premium.
11
3
Share

Is the BMW X5 a Joint Venture or Imported Vehicle?

BMW X5 is an imported vehicle. BMW X5 Introduction: This is a mid-to-large-sized SUV under the BMW brand, with a wheelbase of 2975 mm, and dimensions of 4930 mm in length, 2004 mm in width, and 1776 mm in height. The vehicle is equipped with two engines: a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. X5 Engine Introduction: The BMW X5's 2.0-liter turbocharged engine is codenamed B48, delivering 265 horsepower and a maximum torque of 400 Nm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
20
0
Share

What is the normal sleep current for a Mercedes-Benz S350?

Mercedes-Benz S350 normal sleep current should not exceed 20.0mA. Introduction to sleep current: Sleep current refers to the weak current that still exists when the ignition switch is in the off position. It is precisely because of these sleep currents, along with the natural discharge of the battery, that vehicles are prone to being unable to start due to insufficient battery power after long-term parking. Reasons for sleep current: The existence of sleep current is because some control units must maintain power supply to preserve data memory functions. For example, the audio system needs to remember the last listened frequency band, the air conditioning system needs to remember the air direction and speed settings, and some sensors of the anti-theft system also require continuous power supply to ensure 24/7 monitoring functionality. This portion of sleep current discharge is considered normal external discharge for the battery.
5
1
Share

What Causes the Engine Abnormal Noise When Accelerating in a Hot Geely Boyue?

Geely Boyue hot car acceleration engine abnormal noise reasons are as follows: Engine carbon deposits: Carbon deposits can cause incomplete combustion of gasoline, making the engine shake. The impact of engine carbon deposits on the car is significant, first by reducing engine power, meaning the power output becomes uneven and gradually diminishes, in other words, the car becomes increasingly less powerful. Transmission overload operation: Overloading the transmission can degrade the quality and frictional characteristics of the transmission oil, increasing friction and wear, leading to transmission noise. At the same time, sludge (impurities or dirt) can also form inside the transmission (such as in the valve body), causing the transmission to jerk, slip out of gear, experience shocks, slip, make abnormal noises, delay, overheat, or leak oil.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.