Buick Excelle Maintenance Schedule?

1 Answers
Bustamante
07/30/25 12:02am
Buick Excelle minor maintenance is recommended every 5,000 kilometers or 6 months of vehicle use, while major maintenance should be performed every 10,000 kilometers or 1 year of vehicle use. Below is relevant information about vehicle maintenance: 1. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as vehicle servicing. 2. Vehicle maintenance primarily includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other components. 3. The purpose of vehicle maintenance is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration processes, and extend the service life. Routine maintenance includes replacing engine oil and oil filter, replacing the three filters (air, cabin air, and fuel filters), as well as checking and replenishing brake fluid, coolant, and power steering fluid.
Was this review help?
14
3
Share
More Forum Discussions

What Causes the Hissing Sound in a Volkswagen Engine at Idle?

Volkswagen engine has a hissing sound at idle for the following reasons: Worn Balance Shaft: The balance shaft is used to reduce vibrations generated during engine operation. If the oil passage of the balance shaft is blocked, it will increase wear on the shaft neck and bearings, leading to a hissing sound. Use of Inferior Engine Oil: If the vehicle is filled with inferior engine oil, excessive sludge can form and block the lubrication oil passages, preventing the oil from reaching components that require lubrication and cooling. This can cause wear on the camshaft, crankshaft, and connecting rod bearings, resulting in abnormal noises. Increased Timing Variable Wheel Clearance: If the internal rotor of the variable timing wheel is stuck or the oil chamber is worn, it will lead to increased clearance and abnormal noises. Excessive Valve Clearance: The rocker arm is the lever mechanism that presses the valve, and the size of the valve clearance is mainly controlled by the hydraulic lifter. Damage to either component will cause valve noise.
12
0
Share

What does the front of the Geely Binyue look like?

As the first SUV model under Geely's BMA architecture, the Binyue exudes a highly fashionable and sporty design. Its front grille features a smoked black treatment and incorporates an all-new black logo. The waistline extends from the front fender all the way to the rear, creating a muscular appearance. The floating roof gently slopes downward to connect with the rear spoiler, resembling a lion ready to pounce. Binyue's body dimensions: The Binyue measures 4330x1800x1609mm in length, width, and height, with a wheelbase of 2600mm. Geely Binyue's powertrain: The Binyue is equipped with 1.0T and 1.5T engines, both being three-cylinder units. The 1.0T engine delivers a maximum power of 100KW and peak torque of 205Nm, paired with a 6-speed manual transmission exclusively available on the entry-level model. All other variants come with the 1.5T engine, which produces 130KW maximum power and 255Nm peak torque, mated to a 7-speed dual-clutch transmission, achieving 0-100km/h acceleration in just 7.9 seconds.
7
2
Share

At what tire pressure level should the Haval F7 not be driven?

Haval F7 should not be driven when the tire pressure is below 1.7 bar. The optimal tire pressure should be maintained between 2.3-2.5 bar. Hazards of low tire pressure: The tires become softer, increasing the friction coefficient between the tires and the road surface, leading to higher fuel consumption. The part of the tire in contact with the ground deforms significantly, which over time can cause fatigue in the tire rubber and internal cord layers, affecting the tire's service life. It can also result in a heavy steering wheel and abnormal pulling, among other factors detrimental to driving safety. Hazards of excessive tire pressure: Vibration and pulling of the steering wheel, reduced ride comfort, decreased tire friction and adhesion, affecting braking performance. It accelerates localized wear on the central tread pattern of the tire, reducing the tire's lifespan.
7
2
Share

Which Generation is the BMW 7 Series?

BMW 7 Series is the seventh generation. Introduction to BMW 7 Series: The BMW 7 Series is a high-end luxury sedan produced by German automaker BMW, exclusively manufactured in Germany with no domestically produced 7 Series models currently available. Powertrain Configuration: In addition to featuring BMW's Double-VANOS dual overhead camshaft variable valve timing system, the new engine also incorporates the continuously adjustable Valvetronic electronic valve drive mechanism, significantly reducing fuel consumption and emissions. The engine delivers a maximum power output of 225 kW and peak torque of 390 Nm, accelerating from 0 to 100 km/h in just 4.6 seconds.
2
5
Share

Is the Mercedes-Benz AMG S65L Final Edition Sold Out?

The Mercedes-Benz AMG S65L Final Edition has been discontinued. Exterior Design: The Mercedes-Benz AMG S65L features minor updates on the front face, with the main changes concentrated on the bumper and front apron. The headlights and the family-style pan-shaped grille retain the signature Mercedes-Benz design. The bumper is more prominent, and the three air intakes on the flared front apron, along with the two round chrome fog lights, are very eye-catching. The round fog lights embedded in the front bumper also stand out. Interior: The interior of the Mercedes-Benz AMG S65L builds upon the S-Class foundation, elevating it further. The new model features Nappa leather upholstery and offers a variety of color options, including satin black, beige, coffee brown, nut brown, black, and crystal gray.
2
0
Share

What is the current value of the Audi S3 after locking?

Audi S3's current value after locking should be within 0.05 to be considered normal. Definition of current value: When a direct current and an alternating current pass through resistors of the same value, if the heat generated by the two currents through the resistors is the same within the same period of time, the current value of the direct current is said to be the effective value of the alternating current. The effective value of the current is not the same as the average value of the current. The effective value of the alternating current is defined based on the thermal effect of the current, while the average value of the alternating current refers to the magnitude of the average current over a certain period of time. Car battery maintenance: Avoid parking the car in an open parking lot for a long time. If it needs to be parked for an extended period, the battery should be removed and taken away to prevent damage from freezing.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.