···
Log in / Register

Breath Test 92 Blood Test 79, Count as Drunk Driving or DUI?

4 Answers
LeQuinn
07/29/25 12:13am
Breath Test 92 Blood Test 79 counts as drunk driving. The principle of not driving after drinking: Normally, the human body can metabolize about 10 to 15 grams of alcohol per hour. A pound of liquor is 500 grams, with an alcohol content of approximately 200 grams. At a rate of metabolizing 10 grams of alcohol per hour, it would take at least 20 hours. To be on the safe side, and because the body contains a large amount of alcohol, reaction times are impaired. Forcing oneself to drive under these conditions can easily lead to traffic hazards or accidents. Penalties for drunk driving: In 2021, if caught driving under the influence, one will have 12 points deducted from their license, face a downgrade, have their vehicle impounded for six months, and be fined. For repeat offenders, there will be up to ten days of detention, fines, revocation of the driver's license, and a two-year ban from obtaining a new one. If driving a commercial vehicle under the influence, the penalty is 15 days of detention, fines, revocation of the driver's license, and a five-year ban from obtaining a new one. If a major traffic accident occurs due to drunk driving, constituting a crime, the driver will be banned from driving for life.
Was this review help?
15
1
Share
McJordan
08/12/25 3:25am
This sounds familiar, I've encountered a similar situation before. A blood alcohol level of 79 is below the standard threshold of 80, so it's definitely drunk driving (DUI) but not severe drunk driving (DWI). The breathalyzer reading of 92 might be slightly high because breath tests can be affected by mouth moisture or device errors. Ultimately, law enforcement relies more on blood tests for accuracy. Penalties for drunk driving usually involve fines and demerit points, which aren't too severe, but it's still better not to take chances. With over ten years of driving experience, I've seen too many people get into trouble because of a little alcohol. My advice is to wait at least two hours after drinking before driving, or simply use a ride-hailing app for peace of mind. Road safety starts with paying attention to details. By reminding each other and forming good habits, we can reduce accidents. Staying alert on the road is the most important thing.
Was this review help?
1
0
Share
Expand All
McBenjamin
10/01/25 7:05am
From a safety perspective, a blood alcohol level of 79mg/100ml falls under the category of drunk driving but does not reach the threshold for drunk driving, which is above 80. However, alcohol has already impaired reaction times, increasing the risk factor. Drunk driving can lead to criminal penalties such as license revocation, while drunk driving typically results in administrative penalties including fines. Data shows that even minimal alcohol consumption increases accident risks. I advocate for designated non-drinking drivers to take turns at gatherings to prevent accidents at the source. Individuals can carry portable alcohol testers to check their levels before deciding to drive. A culture of safe driving requires everyone's participation.
Was this review help?
17
1
Share
Expand All
VanMaria
11/15/25 2:04am
From a testing perspective analysis, the breathalyzer reading of 92 may be inaccurate, while the blood test result of 79 mg/100 ml is more reliable as evidence for drunk driving. In principle, blood sample testing has smaller errors, whereas breathalyzer devices sometimes overestimate. The standard directly uses blood test results as the basis, and since 79 is less than 80, it is determined as drunk driving. It is recommended that drivers avoid drinking and driving, opting for ride-hailing apps or walking for greater safety. Although technology has advanced, the human brain is prone to impairment.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Which has priority, right turn or going straight?

Going straight has priority. According to Article 51 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, at intersections with designated lanes, vehicles must enter the appropriate lane based on their intended direction of travel. When making a right turn, if the vehicle ahead in the same lane is waiting for the traffic signal, the following vehicle must stop and wait in turn. Relevant information about traffic lights is as follows: Introduction: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Control methods: The most basic control method is fixed-time control at a single intersection. Line control and area control can also use fixed-time control methods, also known as static line control systems and static area control systems.
12
1
Share

Can motorcycles be driven on the road in Wuhan?

Motorcycles cannot be driven on the road in Wuhan. Here are the relevant details: Motorcycle ban policy: Wuhan has banned motorcycles since 2004. According to regulations, motorcycles are not allowed to operate in urban areas, but they can be driven freely in suburban areas. Motorcycles purchased in Wuhan cannot be licensed. However, motorcycles bought in suburban areas can be registered with suburban licenses. Driver's license required: Motorcycles are classified as motor vehicles in China, and a driver's license is required to operate them. The standard C-class car license is not applicable for motorcycles. Riding a motorcycle without a license is considered unlicensed driving. Currently, there are three main types of motorcycle licenses: Class F (for light motorcycles), Class E (for regular two-wheel motorcycles and light motorcycles), and Class D (for regular three-wheel motorcycles, regular two-wheel motorcycles, and light motorcycles).
18
5
Share

What are the requirements for opening a charging station?

Opening a charging station requires two basic conditions: a fixed parking space and a power supply. The following is an introduction to charging stations: Procedures for opening a charging station: First, submit a letter of intent to the local government's development and reform commission planning department and wait for approval. Then, apply for the geographical location from the Land and Resources Bureau, and simultaneously submit a feasibility report to the Urban Planning Bureau of the Construction Committee, also waiting for approval. Once these departments agree to the plan and provide approval, the next steps involve the Industrial and Commercial Bureau, Taxation Bureau, Quality Inspection Bureau, Environmental Protection Bureau, Fire Department, and, most crucially, the Power Bureau. Once all these approvals are obtained, after the construction of the electric vehicle charging station is completed, an acceptance application can be submitted to the power supply company. Upon passing the acceptance inspection, the power supply company will complete the installation of meters and power connection, after which the station can naturally begin operations. Functions of a charging station: The charging pile (socket) can achieve timed charging, electricity metering, and amount calculation, serving as a terminal for citizens to purchase electricity. At the same time, to improve the efficiency and practicality of public charging piles (sockets), functions such as multi-charging from a single pile (socket) and charging for electric bicycles will be gradually added in the future.
9
0
Share

What is Fatigue Driving Warning?

Fatigue driving warning is a driver fatigue monitoring and early warning product based on the physiological response characteristics of the driver. Below is a detailed introduction to the relevant content: Warning System: The commonly equipped fatigue monitoring system is called the "Fatigue Driving Warning System". It is based on the driver's physiological image response and consists of two main modules, the ECU and a camera. The system uses the driver's facial features, eye signals, head movements, etc., to infer the driver's fatigue state and provides alarm warnings and takes corresponding measures. It offers active and intelligent safety protection for drivers and passengers. Safety Warning System: Additionally, some fatigue monitoring systems are referred to as "Driver Safety Warning Systems". This system is activated when the vehicle enters environments that are prone to making the driver relaxed, such as straight and flat roads, or situations that may cause the driver to become distracted or doze off. It also activates when the vehicle speed exceeds 65 km/h. The Driver Safety Warning System consists of a camera, several sensors, and a control unit. The camera is installed between the windshield and the rearview mirror inside the car and continuously measures the distance between the car and the lane markings. It monitors the vehicle's driving route through signals from the digital camera and data from the steering wheel movements.
6
2
Share

What is the function of paddle shifters?

The function of paddle shifters is: without the need to step on the clutch pedal, the driver can complete gear shifting operations without taking their hands off the steering wheel. Their characteristics are: convenient operation, high efficiency, and improved driver control. Paddle shifters are located on the left and right sides of the steering wheel arc. The operating steps are: 1. Press the car's brake pedal all the way down; 2. Start the car and let it idle; 3. Move the automatic gear lever to D mode, S mode, or manual mode; 4. Lift with the index and middle fingers towards the driver to upshift, and press down with the thumb towards the steering wheel to downshift. The types of paddle shifters are divided into: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate simultaneously with the steering wheel as a whole.
2
3
Share

How to Lift the Wiper Blades on a BMW X1?

To lift the wiper blades on a BMW X1, follow these steps: 1. Press the start button to turn on the power; 2. Wait for about 5 seconds and press the start button again to turn off the power; 3. Push the wiper control lever all the way up and hold it for 3 seconds. The BMW X1 is a compact 5-door, 5-seat SUV with body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, with a wheelbase of 2780mm. It is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 103 kW and a maximum torque of 220 Nm.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.