BMW 2 Series Gran Coupe Dimensions?

Why Downshift for Overtaking?

Downshifting for overtaking is done to obtain greater power. The moment the gear is downshifted, the engine speed immediately increases while the vehicle speed remains unchanged. Due to the increased transmission ratio, the torque output from the engine to the wheels also becomes greater. After completing the downshift operation, the vehicle typically decelerates by reducing the throttle (so-called deceleration downshifting). Because the torque output increases, continuing to press the accelerator will generate significant acceleration, allowing the vehicle to speed up quickly. Overtaking refers to the process where the following vehicle changes lanes to the rear side of the leading vehicle, passes it, and then returns to the original lane. The lane usually used for overtaking is the inner lane, which is closer to the center of the road and farther from the shoulder.

12

2

Share

How to Turn on the Fog Lights of the Volkswagen Tharu?

To turn on the fog lights of the Volkswagen Tharu, follow these steps: The switch is located below the left side of the steering wheel. First, turn on the headlight switch, then pull the knob outward. Pulling it once activates the front fog lights, and pulling it again activates the rear fog lights. Functions of fog lights: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear, serving to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot your car in low-visibility conditions. The Tharu features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of configuration, the Tharu comes standard with a tire pressure monitoring system, front and rear parking radar, drive mode switching, auto hold, and other features.

13

0

Share

What to Do When the Transmission Overheats?

Here are the reasons and solutions for transmission overheating: High temperature reason one: The engine and water temperature are too high, affecting the heat dissipation of the transmission. Solution: Repair the engine. High temperature reason two: The radiator grille is clogged. Solution: Clean the radiator. High temperature reason three: The transmission clutch is slipping, generating additional heat. Solution: Repair the coupler. High temperature reason four: Insufficient flow in the transmission cooling oil circuit. Solution: Repair the valve body or replace the oil pump. High temperature reason five: The thermostat is stuck. Solution: Replace the thermostat.

16

4

Share

What noise does a damaged inner CV joint make?

Noises caused by a damaged inner CV joint include: 1. A clicking sound from the transmission area when accelerating or driving on uneven roads, often accompanied by CV joint grease leakage. 2. In cases of severe damage, abnormal noises may also occur when turning the vehicle. Most CV joint failures produce clicking sounds primarily during acceleration, with rare occurrences during coasting. There are two common types of CV joints used in passenger vehicles: fixed-type CV joints, which allow only rotational movement between shafts without axial displacement during torque transmission; and plunging-type CV joints, which permit both rotational movement and axial displacement between shafts during torque transmission.

13

3

Share

Why is the car air conditioner not heating?

The reasons why the car air conditioner is not heating are: 1. Poor operation of the heating control mechanism leading to insufficient warmth; 2. Issues with the engine cooling system causing inadequate heating. The car air conditioner is a ventilation device that adjusts and controls the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to an optimal state, providing a comfortable environment for passengers and creating good working conditions for the driver, playing a crucial role in ensuring safe driving. Methods for maintaining the air conditioner include: 1. Regularly cleaning the surfaces of the condenser and evaporator; 2. Paying attention to the operation of the compressor; 3. Closing the external circulation when there is a lot of dust in the air to reduce contamination of the air filter; 4. Regularly cleaning the air ducts and replacing the air filter to maintain fresh air inside the car.

1

5

Share

How to Turn Off the Daytime Running Lights on a Hyundai Elantra?

The method to turn off the daytime running lights on a Hyundai Elantra is: 1. Turn the steering wheel to the left without starting the car; 2. Turn the key to open the door, and upon hearing a ding sound, the daytime running lights will turn off. Taking the 2020 Hyundai Elantra as an example, its body dimensions are: length 4610 mm, width 1800 mm, height 1450 mm, wheelbase 2700 mm, and fuel tank capacity 53 liters. The 2020 Hyundai Elantra is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 115 hp, with a maximum power speed of 6300 rpm and a maximum torque speed of 4500 rpm. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.

6

5

Share

BMW 2 Series Gran Coupe Dimensions?

Why Downshift for Overtaking?

How to Turn on the Fog Lights of the Volkswagen Tharu?

What to Do When the Transmission Overheats?

What noise does a damaged inner CV joint make?

Why is the car air conditioner not heating?

How to Turn Off the Daytime Running Lights on a Hyundai Elantra?

What is the difference between beamless and beam-type wiper blades?

What Types of Vehicles Can an A1 Driving License Drive?

Why does the car shake violently while driving?

How Heavy is the Counterweight of a 200 Excavator?