Beginner's Motorcycle Riding Tutorial?

2 Answers
AlessandraFitz
07/28/25 10:09pm
The beginner's motorcycle riding tutorial is as follows: Tutorial: First, familiarize yourself with the motorcycle by getting on and adjusting to it. Check the brakes, clutch, transmission, and other essential components. Next, learn how to start the motorcycle. Electric start makes it much easier, but if not available, master kick-starting the motorcycle—always ensure it's in neutral before starting. Once the motorcycle is running, slightly rev the throttle to prevent stalling. Then, hold the clutch (do not release it yet), shift into gear (beginners should start in first gear), gently apply throttle while slowly releasing the clutch to complete the motorcycle's takeoff. After starting, hold the clutch again to shift gears for acceleration, then release the clutch and apply throttle. Beginners should avoid high speeds initially and focus on getting comfortable. Motorcycle Introduction: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and as sports equipment. Broadly, motorcycles are categorized into street bikes, sport bikes, off-road bikes, cruisers, and touring bikes.
Was this review help?
17
2
Share
Valarie
08/12/25 2:42am
As a beginner who just started learning motorcycles a few months ago, I felt both excited and nervous. I remember the first step was finding a safe place to practice, like an empty parking lot or open space. It's best to wear full gear—a helmet is mandatory. I bought a high-quality full-face helmet, along with gloves and knee guards, so I wouldn't get hurt in case of a fall. Then, I started with basic operations: learning how to start, shift gears, brake, and turn. It's advisable to begin with a small displacement bike—I chose a 150cc one for easier control. Having a friend or experienced coach guide you is helpful; they can correct your posture, like leaning slightly to maintain balance. I practiced for 30 minutes daily, only on sunny days, avoiding rain or nighttime. After a few weeks of consistent practice, I gained enough confidence to start riding on roads. The key for beginners is to focus on mastering the basics—don’t rush onto highways. Prioritizing safety helps avoid unnecessary detours.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What are the car brands starting with the letter Z?

Zhonghua, Zotye, and Hybrid Kinetic are some of the brands that start with the letter Z. Here are the details: Zhonghua Auto is a sedan brand under Brilliance Auto Group, which is part of the Brilliance Group. Zhonghua offers more than ten models across two series: sedans and SUVs. Zotye Auto is a large privately-owned enterprise group focused on the R&D and manufacturing of complete vehicles, engines, transmissions, and other key components. It currently has two vehicle production bases in Zhejiang and Hunan, and two vehicle brands: Zotye Auto and Jiangnan Auto. The company is equipped with advanced stamping, welding, painting, and assembly production lines, as well as vehicle dynamic performance testing lines. Hybrid Kinetic Motors is a new energy-efficient and environmentally friendly automotive company engaged in vehicle development, manufacturing, and sales. Its products are characterized by high efficiency, low emissions, excellent performance, and high cost-effectiveness. Hybrid Kinetic Motors is registered in Delaware, USA, with its headquarters located in Pasadena, California. It has multiple manufacturing bases in the United States and China. The company aims to become one of the world's leading manufacturers of clean-energy hybrid vehicles.
7
5
Share

How to Start the Touareg When the Remote Control Battery is Dead?

Locate the hidden mechanical keyhole. Some push-to-start models are designed with a keyhole for using a metal key. Relevant details are as follows: 1. The hidden mechanical keyhole is usually located behind the push-to-start button, and you need to pry off the plastic button to see it. 2. Every remote key comes with an attached metal key blade. Insert this key blade directly into the door's keyhole to unlock or lock the door.
5
5
Share

Can Red and Green Car Antifreeze Be Mixed?

Red and green car antifreeze cannot be mixed. For antifreeze of different colors, there may be differences in chemical properties and components. Even if the main ingredients are the same, the secondary ingredients may vary, and the formulation ratios can differ. Mixing them can easily lead to chemical reactions, causing hazards such as sedimentation, scaling, and corrosion, thereby affecting the engine's lifespan. How to choose antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in several specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, though it could also be caused by excessively high cylinder temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. To determine if antifreeze is low, check the markings. If the antifreeze level is below the minimum mark, it indicates a shortage.
16
3
Share

Can a sedan take the Sichuan-Tibet 318 route?

The Sichuan-Tibet 318 route is accessible by sedan. Out of the total 2,146 kilometers of the Sichuan-Tibet route, over 500 kilometers are now covered by highways, including the Ya'an-Kangding Expressway and the Lhasa-Nyingchi Expressway. Here are some considerations for traveling the Sichuan-Tibet route: Choose the right time and season: Although the road conditions on the Sichuan-Tibet route have improved significantly, natural disasters such as mudslides, landslides, and road collapses still occur annually, necessitating frequent repairs. If driving a sedan to Tibet, it is crucial to avoid the rainy season, which is the peak period for accidents. Sedans have limited ability to handle rough road conditions and poor passability compared to SUVs and off-road vehicles, making them less suitable for this route during the rainy season. Avoid venturing onto small paths or uninhabited areas: Sedans are far less capable than off-road vehicles in handling all types of terrain. It is difficult to predict whether a dirt road might conceal deep pits or water holes. Once a sedan gets stuck, the chances of self-recovery are almost zero, leaving no option but to call for rescue.
7
0
Share

What is the lifespan of an Aisin 6AT transmission?

The lifespan of an Aisin 6AT transmission is approximately 200,000 kilometers, but this is under the condition that the vehicle is driven properly. For most Aisin 6AT transmissions, the transmission fluid should be replaced after the car has been used for 3 years or driven about 60,000 kilometers. If the car frequently operates in congested environments, the transmission fluid can be replaced at 50,000 kilometers. If the car is often driven on highways, the transmission fluid can be replaced at 80,000 kilometers. Methods for replacing transmission fluid: Flush method: The flush method is performed while the car is running, using specialized equipment to replace the fluid without lifting the car. This method maintains fluid circulation within the transmission, flushing out sludge and impurities deposited at the bottom of the transmission, resulting in a cleaner internal transmission. In most cases, the flush method can replace about 10 liters of fluid. Gravity drain method: The gravity drain method is performed when the car is turned off. In this method, the car is lifted, and the transmission fluid naturally flows out under gravity. This is the most common fluid replacement method, though it is less effective than the flush method. Sludge inside the transmission cannot be completely removed, and only 4-6 liters of fluid can be replaced.
4
4
Share

What are the methods to deal with a flat tire?

If a car tire is flat due to a sharp object like a nail piercing it, do not remove the nail. Simply replace it with the spare tire. If there is no spare tire or you are unable to change the tire, control your speed and drive slowly to the nearest gas station or repair shop for assistance. Methods to repair a flat tire: Using a "strip-type" tire repair patch: This method is commonly used for small punctures caused by objects like nails, glass, or sharp objects while driving. It is quick and saves time, but its durability is not very long. Using a "patch (sticker)" type tire repair patch: Remove the damaged tire from the rim, locate the damaged area, and clean it properly by removing foreign objects and dust. Apply special tire repair glue, then stick on the special tire repair patch. Wait for a certain time, such as a few minutes, and it will be ready. Using a specialized tool for "hot vulcanization" repair: This method involves using a special "rubber material" and a tire repair "heater" to press it tightly against the damaged area of the tire. After heating for a certain period, the rubber material will fuse with the tire surface and "bond" together. Hot vulcanization repairs generally do not crack or come apart easily, last a long time, and can withstand high temperatures.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.