Automatic Transmission Car Start-Stop Procedure?

[MacAsher]

Automatic Transmission Car Start-Stop Procedure is introduced as follows: Automatic transmission starting procedure: 1. Ignition, for models with one-button start, press the one-button start three times. The first press turns on the ACC light (circuit connection), the second press is for vehicle self-check, and the third press requires stepping on the brake to ignite; 2. Step on the brake; 3. Shift to D gear; 4. Release the handbrake; 5. Slowly release the brake, step on the accelerator, and the start is completed. Automatic transmission stopping procedure is as follows: 1. Step on the brake; 2. Shift to N gear (this step can be skipped); 3. Pull up the handbrake. For automatic transmission models, always pull the handbrake first before shifting to P gear to protect the transmission; 4. Release the foot brake and ensure the vehicle does not move; 5. Shift to P gear; 6. Turn off the ignition.

[McJasmine]

When starting an automatic transmission car, I usually first sit in the driver's seat and fasten the seat belt, press the brake pedal with my right foot to prevent the car from sliding, shift to P or N position, and then turn the key or press the start button to start the engine. After all the dashboard lights go off normally, I shift to D gear and start driving. When parking, make sure the car is completely stopped and the brake is pressed, shift to P gear to stabilize the car body, pull up the electronic handbrake or traditional handbrake to lock the wheels, and then turn off the engine. Finally, check that the windows are closed before unfastening the seat belt and leaving. Remember to maintain the vehicle regularly, check the fuel gauge and water temperature before starting, especially in winter, warm up for 30 seconds to ensure even lubrication, which can extend the engine's life.

[AbigailDella]

From a mechanical perspective, starting an automatic transmission vehicle requires pressing the brake pedal to engage the safety lock system and prevent unintended movement. After turning the key, the engine operates via the starter. Once idle speed stabilizes, shift to D (Drive) gear to allow the transmission to control forward motion. The parking procedure similarly involves firmly pressing the brake to stop the vehicle completely, shifting to P (Park) gear to lock the gear selector, engaging the handbrake to prevent rolling, and then turning off the ignition. I often remind myself that pressing the brake is crucial—otherwise, the car might lurch forward during startup or gear changes, especially on slopes or in traffic jams. Always prioritize safety and avoid leaving the transmission in P gear for extended periods to prevent component wear. Maintaining proper daily usage habits helps minimize malfunctions.

[LaMaria]

When I first started driving, I was a bit nervous, but now I understand the steps are simple. First, sit properly and fasten the seatbelt tightly. Press the brake pedal firmly with your right foot and don't relax. Turn the key to ACC, wait for the lights to come on, then start the engine. Once the engine is running, slowly shift to D gear and gently release the brake to start moving. When parking, keep your foot on the brake, shift to P position, pull up the handbrake, confirm the lights are on, press the engine stop button to turn off the engine, and finally double-check everything. Beginners often overlook dashboard warnings or forget to pull the handbrake, leading to the car rolling. Practicing a few more times will make it smoother. Try practicing in an empty parking lot to reduce risks.