At what water level should a car not be driven?

1 Answers
VonDaniela
07/29/25 6:26pm
When the wading water level reaches two-thirds of the bumper or tire height, continuing to drive through water poses certain risks. Higher speeds can increase the actual water depth the car passes through, causing rainwater to enter the cabin from the engine compartment or chassis. Generally, a water depth up to half the height of the wheels is manageable, approximately 30 centimeters. It is advisable not to proceed if the depth exceeds this level. Methods for handling water ingress in a car are as follows: 1. If there is only slight water ingress inside the car with mildly damp floor mats, simply open the doors, remove the mats, and allow them to air dry in the sun. 2. For a parked car, some vehicles have lower engine air intakes, allowing water to enter the intake ducts. Since the engine is not running in this scenario, simply remove the damp air filter and replace it.
Was this review help?
15
0
Share
More Forum Discussions

What kind of suspension does the new Excelle use?

The new Excelle uses a MacPherson strut independent suspension at the front and a compound torsion beam non-independent suspension at the rear. The suspension refers to all the force-transmitting connection devices between the car's frame and axle. Depending on the type, car suspensions are categorized into independent and non-independent suspensions. Different suspension types affect the car's comfort and handling differently. The new Excelle is a compact sedan produced by SAIC-GM Buick, equipped with a 1.3-liter turbocharged engine across the lineup. Transmission options include a 5-speed manual and a CVT continuously variable transmission. The vehicle features multiple body reinforcement measures, which not only enhance safety but also significantly increase chassis rigidity, improving the sporty feel and providing better road feedback for the driver, thereby enhancing the driving experience.
8
0
Share

What is the role of seat belts during a vehicle collision?

During a vehicle collision, the role of seat belts is to reduce the likelihood of death or serious injury in traffic accidents by minimizing the secondary impact forces that pose internal collision risks. They ensure proper occupant positioning to maximize the effectiveness of airbags and prevent occupants from being ejected from the vehicle or experiencing rollover. Seat belts are a vehicle safety device designed to protect occupants from harmful movements caused by collisions or sudden stops. The correct way to use a seat belt is: 1. First, adjust the height of the seat belt. If it is too high, it may tighten around the neck during an emergency, and if it is too low, it may not fully restrain the body from moving forward. 2. After fastening the seat belt, it should not be too loose or too tight—approximately leaving space for two fingers ensures safety without causing discomfort.
10
4
Share

How Many Years of Driving Experience Are Required for Ride-Hailing Services?

Ride-hailing services require drivers to have at least 3 years of driving experience. Below is relevant information about ride-hailing services: 1. Definition of Ride-Hailing Services: Ride-hailing, short for online car-hailing services, refers to business activities that utilize internet technology to build service platforms, integrate qualified vehicles and drivers, and provide non-cruising taxi services by consolidating supply and demand information. 2. Passenger Safety Measures for Ride-Hailing Services: On May 24, 2018, the Deputy Director of the Transportation Service Department of the Ministry of Transport stated that the Ministry is closely monitoring the ride-hailing market. To effectively ensure passenger safety, three key tasks must be prioritized: strengthening pre-entry qualifications; implementing the primary responsibility of platform companies as carriers; and enhancing mid- and post-event supervision.
13
3
Share

How often should the battery of a new energy vehicle be replaced?

With reasonable usage, the battery of a new energy vehicle can last for 8 years. After 8 years, the battery needs to be replaced. The lifespan of a new energy vehicle's battery is not a fixed value; different battery models will have varying service lives. Precautions for new energy vehicles: 1. Before daily use, check the vehicle's battery level and performance, such as braking performance. Ensure that commonly used configurations are functioning properly and that there are no faults before driving; 2. If the charging part of the vehicle requires repair or fuse replacement, unplug the power plug first. Never perform maintenance while charging, as it lacks safety guarantees and may lead to more severe accidents, causing unnecessary losses.
20
4
Share

How can beginners judge the width of the car when parking?

Methods for beginners to judge the width of the car when parking: You can use some reference points, such as the raised points on the car's wipers and the lines on the road. When the raised point of the left wiper coincides with the line on the road, the left tire will press on the line on the ground. Similarly, when the raised point of the right wiper coincides with the line on the ground, the right tire will press on the line on the ground. Driving safety comes first, and you should not have a 'give it a try' mentality. If driving in poor road conditions, be sure to get out of the car and check to ensure safety before proceeding. Try to keep the left side of the car close to obstacles, as it is very easy to observe the position of the left side of the car.
9
3
Share

What is the D gear in a car?

D gear stands for Drive, also known as the forward gear, which is the gear position to engage when driving. The driver's task is to control the throttle and brake, pressing the throttle to accelerate and the brake to decelerate. Additional information about D gear: 1. In this gear position, the transmission automatically shifts between 1st gear and overdrive (equivalent to 1st to 4th gear) based on speed and throttle conditions. This gear is used for normal road driving. 2. Due to different designs in various countries' car models, the "D" gear generally includes gears from 1st to high gear or from 2nd to high gear, and it automatically shifts gears according to changes in speed and load.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.