At What Voltage Will a Car Battery Fail to Start the Engine?

1 Answers
LeviRose
07/29/25 8:18pm
When a car battery's voltage drops below 12V, it may result in failure to start or difficulty in starting the engine. Specific details regarding the voltage at which a car battery fails to start the engine are as follows: 1. If the car battery voltage is too low, there won't be sufficient starting current to power the starter motor. Without the starter motor functioning, the car will fail to start. 2. Each attempt to start the car should not exceed 5 seconds to avoid damaging the battery. If the car doesn't start after several attempts, check the ignition system and battery voltage instead of repeatedly trying to start it. 3. If the vehicle remains unused for an extended period, ensure the battery is fully charged beforehand. It's advisable to start the vehicle at least once a month.
Was this review help?
10
2
Share
More Forum Discussions

What types of motion does a moving car exhibit?

The motion of a car includes both (rotation) and (translation). Here is the relevant information: 1. Rotation: An object moves in a circular path around a point or an axis, such as the Earth rotating on its axis while also revolving around the Sun. This corresponds to the rotation of the vehicle's wheels. 2. Translation: Within the same plane, when all points of a figure move the same distance in a straight-line direction, this type of motion is called translational motion, or simply translation. This corresponds to the physical phenomenon of the vehicle's body moving forward. 3. Mechanical motion: One of the most fundamental forms of mechanical motion is rotation. On a rotating object, all points except those on the axis of rotation move in circular paths of varying sizes around the same axis. This motion is called 'rotation.' The trajectories of all points on the object are concentric circles centered on the axis of rotation. At any given moment, the linear velocity and linear acceleration of different points on the rotating object vary.
16
4
Share

Can You Continue Driving with Engine Knocking?

Once engine knocking is detected, you must not continue driving, as it may lead to seizure at any moment, damage the crankshaft and connecting rods, and affect the engine's lifespan. Here are the reasons for engine knocking: 1. Severe piston knocking noise occurs when the engine is cold-started, and the noise diminishes after the engine warms up. This phenomenon is caused by excessive piston clearance or piston deformation. When the engine is cold, the piston clearance is larger, resulting in more pronounced knocking noise. As the engine temperature rises, the piston expands, reducing the clearance and thus lessening the knocking noise. 2. The engine operates normally when cold, but knocking occurs during acceleration when hot. This issue might seem contradictory to the first type of piston knocking. As the engine temperature increases, the combustion speed of the air-fuel mixture also accelerates. If the ignition timing is too advanced, the peak combustion pressure in the cylinder will occur earlier, increasing the force on the cylinder walls and causing knocking noise.
6
4
Share

What are the interior space dimensions of the 6-seater JMC Transit?

JMC Transit 6-seater is available in long-wheelbase and short-wheelbase versions. Long-wheelbase version: length 5418mm, width 1974mm, height 2228mm, wheelbase 3570mm. Short-wheelbase version: length 4666mm, width 1974mm, height 2200mm, wheelbase 2835mm. Below is additional information: 1. Brand: JMC Motors is the abbreviation of Jiangling Motors Co., Ltd. and also an automobile brand under the company. The company evolved from Jiangxi Automobile Manufacturing Plant established in 1968. In 1997, JMC/Ford successfully launched China's first jointly developed Sino-foreign vehicle - the Transit. 2. Transit: JMC Transit is the first independently developed European-style light passenger vehicle launched by JMC. It is a reliable, durable, and cost-effective European-style multi-purpose commercial vehicle with upgraded configurations based on the JMC Ford Classic Transit product platform.
9
0
Share

How to Solve the Oil Burning Issue in Tiguan?

Here are the solutions: 1. Use high-quality engine oil: Engine oil is prone to corrosion and aging under prolonged high temperatures, causing the oil film to thin and more likely to enter the combustion chamber. Using high-quality engine oil can delay this phenomenon. 2. Pay attention to the cleanliness of the fuel system: Carbon deposits are generated during fuel combustion, which are the root cause of various car problems, such as aging of valve seals and increased piston-cylinder wall gaps. Maintaining the cleanliness of the fuel system is very helpful in solving and preventing oil burning issues. 3. External assistance: The cleanliness of the fuel system and the anti-aging properties of the engine oil are key factors in solving and preventing oil burning issues. This requires the use of high-quality engine oil and fuel additives.
11
3
Share

What Causes Unstable Idle Speed When Starting the Car in the Morning?

Unstable idle speed when starting the car in the morning can be caused by the following reasons: Intake Manifold Leak: When unauthorized air, gasoline vapor, or combustion exhaust enters the intake manifold, it can cause the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. Excessive Carbon Buildup in the Throttle Body: Too much carbon buildup in the throttle body and surrounding intake passages changes the cross-sectional area of the air channel, preventing the control unit from precisely regulating the idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. Faulty Intake System Actuators: The engine's intake system has many actuators, such as the throttle motor, idle speed control motor, duty cycle solenoid valve, mass airflow sensor, and intake pressure sensor. Malfunctions or damage to these components can lead to unstable idle speed.
11
4
Share

How to Charge a Hybrid Electric Vehicle?

Hybrid electric vehicles are currently divided into two main categories: plug-in and non-plug-in. Plug-in hybrid models can be charged via external power sources, while non-plug-in hybrid models cannot be charged externally. More details are as follows: 1. Plug-in hybrid models can be charged using external charging equipment (such as charging stations or ordinary household power sources) or through automatic charging while driving with fuel. The characteristic of plug-in hybrid models is that when fully charged, the car can generally travel a longer distance in pure electric driving mode. If the usage intensity is not very high, it can basically achieve zero fuel consumption, offering significant advantages in energy saving. 2. Non-plug-in hybrid models cannot be charged externally and can only be charged by operating the vehicle. Their energy source comes from storing the energy wasted by conventional vehicles in the form of electricity. Therefore, ultimately, all their energy still comes from gasoline, making them less efficient in terms of energy saving.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.