At What Temperature in Winter Can You Turn On the Air Conditioning?

1 Answers
MacLevi
07/30/25 2:40am
You can turn on the air conditioning for heating when the indoor temperature is below 20℃. Here are some relevant tips for using car air conditioning in winter: 1. Optimal Temperature: The best temperature setting for winter air conditioning is 20℃. A moderate indoor temperature is not only beneficial for health but also prevents the air conditioning from overworking. When heating, start with a low fan speed and switch to medium speed after half an hour. 2. Precautions: For car owners who prefer higher indoor temperatures, be cautious not to set the temperature at the extreme 30℃ that the air conditioning can handle in winter. Otherwise, it may cause the air conditioning to start frequently or run non-stop, increasing power consumption and potentially damaging the air conditioning compressor in severe cases.
Was this review help?
15
5
Share
More Forum Discussions

What to Pay Attention to When Buying a Used Tesla

Here are the considerations when buying a used Tesla: 1. Pay attention to the exterior: Some used cars have been involved in accidents. To increase the value of the used car, dealers may refurbish it, repaint the car to make it look newer. Therefore, when purchasing a car, pay attention to the exterior, observe every corner and component of the car for signs of repainting, and check if there is any wear on the tires, headlights, or bumper. 2. Pay attention to the chassis and frame: After a car has been in an accident, even if the exterior is well repaired, its frame and chassis are difficult to restore. If you find any deformation or bending, be cautious as the car may be an accident vehicle.
9
4
Share

What to do if the tire goes flat with a loud bang after hitting a pothole?

The tire goes flat with a loud bang after hitting a pothole, and it needs to be replaced. Below is relevant information about tires: 1. Service Life: Both overinflation and underinflation can shorten the service life of a tire. Underinflation increases tire body deformation and the contact area of the tire. The sidewall is prone to cracks, excessive heat, and other conditions, accelerating rubber aging and shoulder wear. 2. Increased Load: Overinflation causes excessive stretching deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the car while driving. 3. Follow Recommended Values: The correct tire pressure should be based on the manufacturer's recommended values. The recommended pressure can usually be found in the following places: the vehicle user manual, the label near the driver's door (B-pillar), the drawer next to the driver's seat, or the fuel tank cap door.
15
0
Share

What Causes the Clicking Noise When Reversing a Car?

Introduction to the causes of clicking noise when reversing a car: 1. Damaged car tires: If the car tires have bulges or are punctured by nails or other foreign objects, it can cause abnormal noises when reversing or moving forward. Solution: Simply repair or replace the tires. 2. Faulty car shock absorbers: When the car's shock absorbers malfunction, the car may also produce abnormal noises when turning or driving on bumpy roads. Solution: The shock absorbers need to be replaced at a repair shop or 4S store. 3. Faulty car transmission: If the car's transmission malfunctions, such as damage to the reverse gear, friction can cause abnormal noises. Solution: The transmission needs to be opened to inspect and replace the gears. 4. Faulty car brake pads: Brake pad issues are a common cause of abnormal vehicle noises. Problems include improper installation, severe wear, or foreign objects stuck between the brake pads and calipers. Solution: The specific situation requires removing the car tires to inspect the brake pads before repairs, and replacement may be necessary in some cases.
20
4
Share

What are the hidden features of the Tiggo 8 PLUS Luxury Edition?

Tiggo 8 PLUS Luxury Edition hidden features introduction: 1. Navigation: The navigation can be activated by voice or manually opened. 2. USB ports: Two USB ports can be used simultaneously. 3. Key functions: With the car locked, long-pressing the unlock button lowers all four windows; with the car unlocked, pressing the lock button closes all four windows; with the car locked, long-pressing the lock button starts the engine. Below is an introduction to related content about the Chery Tiggo: 1. Model: The Tiggo 8 PLUS is a mid-size SUV under Chery Automobile. 2. Design: The Tiggo 8 PLUS features a dual-screen design and offers optional 1.5T/1.6T engines. The 1.5T engine + 48V mild hybrid system is one of the highlights of this model, with a maximum horsepower of 156. 3. Transmission: It is paired with a CVT continuously variable transmission, with a combined fuel consumption of 6.4L per 100km. The 1.6T engine is paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 197 and a combined fuel consumption of 6.87L per 100km.
19
0
Share

How to Identify Tire Quality?

You can distinguish the quality of car tires by examining the tread pattern, color, hardness on both sides, the joint between the tread and sidewall, elasticity, and brand. Here are the details: 1. Tread Pattern: Generally, inferior retreaded tires are processed irregularly, resulting in relatively shallow and less smooth tread grooves. 2. Color: Inferior retreaded tires often appear brightly colored and shiny, while genuine tires look relatively dull. 3. Hardness on Both Sides: Pinch both sides of the tire; inferior retreaded tires feel softer. 4. Joint Between Tread and Sidewall: The joint between the tread and sidewall on retreaded tires is less smooth and rounded compared to new tires. 5. Elasticity: Genuine new tires usually have good rubber elasticity. Gently scratch the tire surface with a key, and the scratched area will quickly return to its original state without leaving marks. In contrast, retreaded tires, due to longer usage, have poorer rubber elasticity, and scratching with a key will leave marks. 6. Brand: The brand of the tire is also important. Car owners should choose tire products from well-known brands with good reputations.
19
4
Share

What does the C gear mean in trucks?

C gear is the climbing gear, also known as the half gear. Below is the relevant introduction about the C gear in trucks: 1. Concept: The C gear is the climbing gear, also known as the half gear. For example, when driving on muddy roads or climbing slopes, the half gear comes into play. 2. Application: It is mainly used in heavy-duty trucks when carrying heavy loads and under poor road conditions. It can reduce speed and increase torque, meaning the forward traction is enhanced, improving the passability of heavy-duty vehicles in poor road conditions. The gear ratio of the half gear is the largest among all gears, hence it provides the strongest traction. When making a left turn, try to make the turn as wide as possible. This is because some vehicles might be coming out of the road you intend to turn into. To avoid obstruction or collisions and other hazards, you should try to turn into a spot further away.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.