At what temperature does the Nissan Tiida's water temperature gauge light up red?

1 Answers
DeIvan
07/29/25 11:25pm
Tiida's water temperature gauge: C represents 60 degrees, H represents 110 degrees. The red light will illuminate when the water temperature reaches 110 degrees. When starting the engine, the water temperature gauge should indicate no less than 50°C; during normal driving, the normal reading of the water temperature gauge should be between 70°C and 90°C. The following are the hazards of excessively high water temperature to the engine: 1. The expansion of engine components will reduce the clearance between parts, intensifying engine wear; 2. It will reduce the viscosity of engine oil, leading to increased wear of components and reduced engine lifespan; 3. Damage to the cylinder gasket may cause cross-flow between water channels, oil channels, and air passages on the gasket, allowing oil to enter the radiator and water to enter the engine oil.
Was this review help?
13
0
Share
More Forum Discussions

What does automatic clutch mean?

Automatic clutch refers to a system where the driver shifts gears by operating the gear lever to upshift or downshift without the need to press the clutch pedal. The functions of an automatic clutch are: 1. Liberating the left foot - after installing an automatic clutch, there's no need to press the clutch as the engagement and disengagement are entirely controlled by a microcomputer, reducing driving difficulty and enabling relaxed driving; 2. Effortless gear shifting - simply move the gear lever without worrying about clutch operation; 3. No more fear of traffic jams when driving a manual transmission vehicle equipped with an automatic clutch; 4. No stalling during starts or braking - the automatic clutch control system has stall protection function, allowing smooth starts in first gear; 5. Preserving the vehicle's original power - for low-displacement automatic transmission vehicles, installing an automatic clutch control system doesn't alter the original structure and maintains unaffected power performance.
17
1
Share

What is the ground clearance of the 2018 Camry?

The ground clearance of the 2018 Camry is 155mm. Ground clearance refers to the minimum distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Camry is a model under GAC Toyota. In terms of body dimensions, it measures 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. In terms of power, the Camry is equipped with 2.0L and 2.5L naturally aspirated engines as well as a 2.5L hybrid engine. The horsepower for the two naturally aspirated engines is 169 hp and 209 hp respectively, while the hybrid version's 2.5L engine delivers 178 hp.
5
2
Share

What are the functions of the Roewe 350 dashboard buttons?

From left to right, there are air conditioning controls (1234 indicates the fan speed). AC is the air conditioning switch, and the illuminated button in the middle controls the rear windshield. On the right side, there are temperature controls for adjusting between cool and warm air. The middle button on the right is used to switch between internal and external air circulation. Below is a detailed introduction: 1. Roewe 350: This is a compact sedan positioned in the A-segment market, launched by SAIC Motor following the Roewe 750 and Roewe 550. It is also the first Roewe model to incorporate 3G technology for family use. 2. Advantages: It is currently the most cost-effective mid-size car in China, offering spacious interiors, high safety standards, rich configurations, and sufficient power. Additionally, it can be equipped with the most advanced 3G intelligent in-car networking system in China, inkaNet, which supports navigation, music playback, and internet access.
10
0
Share

What are the dimensions of the Mercedes-Benz GLA?

The Mercedes-Benz GLA has a body length, width, and height of 4410/1834/1611mm respectively, with a wheelbase of 2729mm. Below are the detailed specifications of the Mercedes-Benz GLA: 1. Advantages: The Mercedes-Benz GLA features a very smooth and rounded design style, creating a rich sense of layering. It offers high cost-performance, very ample power, quick acceleration, and is also fuel-efficient. 2. Powertrain: It is equipped with two turbocharged engine options: a 1.6T and a 2.0T. The 1.6T engine delivers a maximum power of 156 horsepower and a maximum torque of 250 Nm. The 2.0T engine comes in different power outputs, with maximum powers of 184 horsepower and 211 horsepower, and maximum torques of 300 Nm and 350 Nm respectively.
2
2
Share

What is the minimum ground clearance of the Jeep Cherokee when fully loaded?

The minimum ground clearance of the Jeep Cherokee when fully loaded is 154mm. Taking the 2021 Jeep Cherokee as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of 4669mm in length, 1865mm in width, and 1691mm in height, a wheelbase of 2707mm, a fuel tank capacity of 60 liters, and a curb weight of 1875kg. The 2021 Jeep Cherokee features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 265PS, a maximum power of 195kW, and a maximum torque of 400Nm, paired with a 9-speed automatic transmission.
5
0
Share

How to Solve the Problem of Fogging on the Outside of the Glass When Using Air Conditioning in Summer?

The solutions to fogging on the outside of the glass when using air conditioning in summer are: 1. Turn on the defogging mode, set the fan speed to maximum, turn on the AC switch, and then adjust the temperature to low, and the fog will disappear; 2. Wiping the inside of the windshield with a cloth dipped in detergent or a special anti-fog agent can also effectively prevent glass fogging. The functions of air conditioning are: 1. Cooling, heating, ventilating, and purifying the air inside the car; 2. Providing a comfortable riding environment for passengers, reducing the driver's fatigue, and improving driving safety. The maintenance methods for air conditioning are: 1. Clean the air conditioning vents in time; 2. Maintain the air conditioning condenser in time; 3. Clean or replace the air conditioning filter element in time.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.