At what temperature does the Crown thermostat open?

1 Answers
SanLaura
07/29/25 12:35pm
The Crown thermostat opens at approximately 87 degrees Celsius. The Toyota Crown thermostat is located near the water pump, at the upper radiator hose connection. The thermostat is a valve that controls the flow path of the coolant, functioning as an automatic temperature-regulating device. It typically contains a temperature-sensitive component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The Crown is a mid-to-large-sized car brand under the Toyota Group. In terms of body dimensions, the Crown measures 5020mm in length, 1805mm in width, and 1480mm in height. The Crown comes in four models with seven trim levels, all equipped with a 3.0L dual VVTI engine and a 6-speed automatic transmission. It utilizes an FR (front-engine, rear-wheel-drive) platform, combining smooth handling with abundant driving power.
Was this review help?
4
4
Share
More Forum Discussions

How to Replace the Air Filter on a Buick Excelle

Open the glove box to see how it is secured. It is held in place by clips on both sides, which can be pried outward to release. After removing the glove box, you will see the installation slot for the cabin air filter. Press the clips on both sides to release it. Install the new cabin air filter, paying attention to the direction of installation. Generally, the white side should face upward, and the yellow side should face downward.
15
0
Share

Can 95 and 92 gasoline be mixed?

95 and 92 gasoline cannot be mixed. The following are the characteristics of gasoline: 1. Volatility: In the engine cylinder, it quickly vaporizes and forms a uniform combustible mixture with air; 2. Stability: The ability to resist oxidation under normal temperature and liquid phase conditions is called stability; 3. Anti-knock: Refers to the ability of gasoline to resist detonation combustion under various usage conditions; 4. Corrosiveness: Sulfur compounds in gasoline can cause corrosion to objects. Additional information: The reason why different grades of gasoline cannot be mixed is that it affects the normal operation of the engine, causing car noise, weak driving, and engine damage. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum and can be used as fuel.
4
2
Share

How to Replace the Small Oil Window on the Brake Master Cylinder?

After removing the top cover and sealing gasket, use a syringe to extract the brake fluid from the oil reservoir, then cover the inside of the reservoir with plastic film. Use a flat-head screwdriver (or an 8mm steel rod) to tap out the old window and remove the old O-ring. Clean the mounting hole thoroughly, insert the new O-ring, and press in (requires a pressing tool) or tap in the new window (interference fit installation, which is quite tight). Remove the plastic film, refill with brake fluid, and reinstall the sealing gasket and top cover.
1
5
Share

How to Start the Engine with One-Button Start in Winter?

Here are the steps for starting the engine with one-button start in winter: 1. The driver sits in the cockpit and presses the start button for the car to perform a self-check; 2. Press the brake pedal and then press the one-button start button to ignite the engine; 3. Press the foot brake, shift to D gear, and release the handbrake to start moving. The functions of one-button start include: 1. Multiple start modes; smart card backup key; 2. Stable and reliable performance; intelligent silent car wash mode; 3. Smart entry via sensing; dual-mode free switching for smart keys. Additional information: The one-button start device is part of a smart car, serving as a button device to simplify the starting process, and it can also be used to turn off the engine.
14
3
Share

What are the impacts of a faulty brake light switch in a car?

Here are the impacts of a faulty brake light switch in a car: 1. The brake light remains constantly illuminated; 2. Cruise control fails to function properly; 3. The battery may drain after parking; 4. For automatic transmission vehicles, the brake indicator light does not illuminate and no sound is heard when pressing the brake; 5. Cruise control often fails to shift gears automatically when activated. The method for replacing the brake light is as follows: 1. Use a Phillips screwdriver or socket to remove the bolts; 2. Pull the light assembly out from the rear pillar; 3. Rotate the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one. Additional information: The brake light is installed at the rear of the vehicle, with a red main body color. Its purpose is to enhance the penetration of the light source, allowing vehicles behind to detect the vehicle ahead in low visibility conditions, thereby preventing rear-end collisions.
11
2
Share

What is the difference between compact cars and subcompact cars?

Subcompact cars differ from compact cars in terms of body size, wheelbase, and generally have weaker power output compared to compact cars. Here are the key differences: 1. Most compact cars have a wheelbase ranging between 2500mm to 2750mm, with body lengths typically between 4100mm to 4700mm. Subcompact cars usually feature a wheelbase of 2350mm to 2600mm and lengths between 3650mm to 4450mm. 2. Common compact car models include the Volkswagen Golf, Volkswagen Lamando, Volkswagen Sagitar, Volkswagen Jetta, Volkswagen Santana, Audi A3, and BMW 1 Series. 3. Subcompact cars offer less interior and trunk space than compact cars, but they are generally more affordable in price.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.