At what speed will the airbag deploy?

What is the displacement of the Audi 30fsi?

The displacement of the Audi 30fsi is 2498 milliliters. Information about car displacement is as follows: Car displacement refers to the size of the engine: Displacement is an important structural parameter for measuring a car. It represents the size of the engine more accurately than bore diameter and the number of cylinders. Many indicators of the engine are closely related to displacement. Smaller car displacement is considered the golden displacement: It's not always the case that smaller displacement is better, as displacement affects the power output. The so-called golden displacement refers to achieving relatively high power with a smaller displacement. In principle, this is true, but with technological advancements, automakers are keen on researching cars with small displacement, low fuel consumption, and sufficient power. In the future, the golden value will change as technology develops.

9

3

Share

Is Running a Red Light Photographed from the Front or the Back?

Electronic cameras capture three photos to determine a red light violation. The first photo shows the vehicle crossing the stop line at the intersection, including the red light signal and license plate number. The second photo shows the vehicle completely crossing the stop line, also including the red light signal and license plate number. The third photo shows the vehicle continuing to move, mainly by comparing the position change from the second photo, again including the red light signal and license plate number. Capturing these three photos confirms a red light violation. Running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits it, and a yellow light serves as a warning. Driving through an intersection during a red light constitutes a traffic violation. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: There are two types of traffic lights: arrow signals and circular signals. When an arrow signal is present, drivers should observe the arrow light first and then the circular light to avoid violations. Note: A circular red light allows right turns unless prohibited by signage. However, if the right-turn arrow is red, turning right is prohibited and will be penalized as a red light violation. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it as a violation. If the front wheels have just crossed the stop line when the light turns red, wait for the next green light before proceeding. Check the green light countdown: If the green light is flashing with a countdown, use it to judge whether to proceed. Without a countdown, if the vehicle is close to the intersection and moving quickly, it may pass to avoid a last-minute stop. If the vehicle is slow or far from the intersection, brake immediately to prevent a violation. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct pedestrians or straight-moving traffic. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without separate pedestrian or non-motorized traffic signals, pedestrians and non-motorized vehicles must follow the motor vehicle signal. During a red light, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not penalized in the following situations: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles may result in a captured violation, but manual review will exclude it from records. If recorded, drivers can appeal to the traffic police. Extreme weather: If visibility is too low for even electronic cameras to clearly capture the traffic light, violations due to mistaken red light running will not be penalized. Emergency situations: Transporting a critically ill patient to the hospital may involve multiple red light violations. After delivering the patient, the driver can provide hospital or patient documentation to the traffic police for verification and violation removal. If possible, calling an ambulance is recommended to avoid accidents. Police direction: During peak hours, traffic police may manually direct traffic at key intersections. Drivers must follow their gestures. According to Article 26 of the "Regulations for the Implementation of the Road Traffic Safety Law," vehicles that have crossed the stop line during a flashing yellow light may continue. However, if a driver speeds through a yellow light, it may still be considered a red light violation if captured.

7

3

Share

What is the difference between Porsche Carrera and 911?

There is no difference between Porsche's Carrera series and the 911 series, as Carrera is a model within the 911 series (essentially the entry-level 911). The Porsche 911 lineup includes models such as the Carrera, Carrera S, Carrera 4, Carrera 4S, Carrera GTS, Turbo, Turbo S, GT3, GT3 RS, GT2 RS, and more. Introduction to the Porsche 911: The Porsche 911 is a sports car manufactured by Porsche in Stuttgart, Germany, designed by Ferdinand Alexander Porsche. Since its evolution in 1964, the 911 has gained international acclaim for its unique style and excellent durability. Introduction to Carrera: The English name for Carrera is 'carrera,' and more accurately, Carrera is a transliteration of 'carrera.' Carrera (carrera) and the 911 are not the same car; rather, the Carrera is a model within the 911 series.

20

2

Share

Can a car worth 110,000 yuan be scrapped with a damage assessment of 40,000 yuan?

It can be scrapped. Below are the specific details about scrapping: Regulations: According to the "Mandatory Scrapping Standards for Motor Vehicles," registered motor vehicles that have reached the prescribed service life; still fail to meet the national safety technical standards for in-use vehicles after repair and adjustment; or still fail to meet national standards for pollutant emissions or noise from in-use vehicles after repair, adjustment, or control technology application, should be mandatorily scrapped. Damage assessment: After a vehicle is scrapped, the insurance company will conduct a damage assessment to determine the remaining value of the legal documentation. Generally, in such cases, the vehicle damage is significant. If the vehicle is covered by collision insurance, the insurance company will first deduct the claim expenses. The insurance compensation amount after scrapping is calculated based on a monthly depreciation rate of 0.6% after determining the insured amount.

4

3

Share

What is the correct operation method for a manual transmission car?

The correct operation method for a manual transmission car is: 1. When starting, press the clutch pedal all the way down, shift into first gear, release the handbrake, slowly release the clutch, and lightly press the accelerator while releasing the clutch; 2. Shift gears quickly and avoid looking down during gear changes; 3. Do not skip gears when shifting. Always shift up or down one gear at a time. Skipping gears during shifting can cause discontinuous power delivery; 4. Do not coast in neutral when going downhill, as it reduces the engine braking effect; 5. Drive at a slower speed in rainy or snowy conditions. The principle of a manual transmission is to manually move the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed changes. Precautions for starting a manual transmission car: 1. Do not release the clutch too quickly; lift it slowly; 2. Press the accelerator only after the engine and drive shaft are connected; 3. Lightly press the accelerator during the semi-engagement phase, then release the clutch.

20

5

Share

How to Cancel the Maintenance Reminder on Lavida?

To cancel the maintenance reminder on Lavida, follow these steps: 1. Turn off the ignition switch. 2. Press and hold the "0.0" button on the instrument panel. 3. Turn on the ignition switch while continuing to hold the "0.0" button. 4. Release the "0.0" button, and the message "Confirm to reset maintenance service data" will appear on the instrument panel display. Press the "0.0" button again to confirm and cancel the maintenance reminder. Here is some additional information about Lavida: 1. Lavida is a compact car under SAIC Volkswagen, with a length, width, and height of 4670mm, 1806mm, and 1474mm respectively, and a wheelbase of 2688mm. 2. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension, with a front-wheel drive system.

7

3

Share

At what speed will the airbag deploy?

What is the displacement of the Audi 30fsi?

Is Running a Red Light Photographed from the Front or the Back?

What is the difference between Porsche Carrera and 911?

Can a car worth 110,000 yuan be scrapped with a damage assessment of 40,000 yuan?

What is the correct operation method for a manual transmission car?

How to Cancel the Maintenance Reminder on Lavida?

Do I need to change back to the original lane after changing lanes in Subject Three?

How to resolve the C1201 fault code?

Why is there water in the car?

Why are the brake lights of the Teana not working?