At What RPM Should You Release the Foot Brake When Starting on a Slope?

1 Answers
GiaRose
07/30/25 2:48am
Release the foot brake when the tachometer reaches 8 during slope starting. Below is an introduction to the relevant content of Subject 2: 1. Test requirements: The test requirement for parallel parking is that the driver must park the vehicle in the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Content and requirements of Subject 2: The five test items are reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Subject 2 requires 26 class hours, including 2 hours of theoretical knowledge, so in practice, it is 24 class hours.
Was this review help?
16
2
Share
More Forum Discussions

What is the normal tire pressure for cars?

Car tire pressure is normally between 2.4 and 2.5 bar. There is usually a tire pressure standard label next to the driver's door, which should be followed when driving normally in the city. Some labels also differentiate between tire pressure for unloaded and loaded conditions, so it's important to refer to the pressure indicated on the label. For long-distance driving, the tire pressure can be slightly increased. During high-speed driving, tire temperature tends to rise, and higher tire pressure results in less deformation and therefore less heat generation. Tire pressure is actually related to the car's shock absorption—if you feel the shock absorption is poor, you can slightly reduce the tire pressure. Here is some additional information: Tire pressure standards: Tire pressure standards also depend on the type of tire and the vehicle model, as different models have different weights, heights, and tire sizes. Seasonal factors: Additionally, tire pressure is significantly affected by seasonal changes, with higher temperatures in summer.
8
2
Share

Can a car with tire pressure of 2.2 still drive on the highway?

Tire pressure of 2.2 is acceptable for highway driving, but it's important to control the speed, which should be maintained between 80-100km/h. According to the international GBT2978-2008 standard requirements, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.
17
5
Share

How Many Years Can a Car Be Driven Before It Must Be Scrapped?

If the car is well maintained and passes the annual inspection, it is possible to drive it for 20 years. However, if the car does not participate in the annual inspection on time, it may be forcibly scrapped in less than 10 years. According to the regulation "private cars over 15 years old must be inspected every six months," the annual inspection cycle for such a car is 0.5 years, and three inspection cycles would be 1.5 years. If the car has not undergone an annual inspection for 1.5 years, it will be forcibly scrapped. Below is relevant information: Vehicle Scrapping Age: The vehicle scrapping age refers to a safety inspection system based on the number of seats and the period of use of the car. The regulation states that small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special machinery vehicles have no usage age limit. New Scrapping Standards: According to the regulation, registered vehicles must be forcibly scrapped under the following circumstances: reaching the prescribed usage age; or failing to meet the national safety technical standards for in-use vehicles after repairs and adjustments.
12
2
Share

Can the spare tire be used if the front tire is flat?

If the front tire is flat, you can replace it with a spare tire. Below is a related introduction to car spare tires: Concept of spare tires: A spare tire refers to the backup tire of a car, and its specifications will be the same as the original ones. However, on some vehicles, to remind the owner to check and replace the faulty tire in time, spare tires with special color rims, compact spare tires, folding spare tires, run-flat tires, etc., are used. Types of spare tires: There are three types of spare tires: full-size spare tires, non-full-size spare tires, and run-flat tires. Full-size spare tires have the exact same specifications as the other four tires on the car and can replace any temporarily or permanently unusable tire. Non-full-size spare tires have slightly smaller diameters and widths compared to the other four tires, so they can only be used as a temporary replacement and are only suitable for non-drive wheels. Run-flat tires, also known as safety tires, are commonly referred to as "run-flat tires" in the industry, literally translated as "tires that can run without air."
12
5
Share

What are the differences between the Model 3 Standard Range and Long Range versions?

Both the Model 3 Standard Range and Long Range versions are primarily rear-wheel drive, with similar power outputs. However, the Long Range version features a higher battery capacity, which naturally results in a longer driving range. The Standard Range version has a range of 349 kilometers, while the Long Range version offers 499 kilometers. More details are as follows: 1. Exterior: The Model 3 not only continues the family's minimalist design style but also appears more futuristic and sporty as Tesla's latest model. Its 2875mm wheelbase and dual waistline design enhance its sense of layering. The rear styling bears a high resemblance to the Model S, with the slightly upturned ducktail spoiler helping to manage rear turbulence. 2. Interior: The Model 3 adopts a popular minimalist design, eliminating the dashboard on the center console, which gives it a modern and forward-looking feel, redefining innovation and imagination. The central touchscreen operates similarly to an iPad, with excellent logic and responsiveness.
12
2
Share

How to Turn on Audi Headlights?

Audi A5's headlight switch is located on the left side of the steering wheel. Turn the knob to the right. Adjust it to the automatic or headlight position. More relevant information is as follows: 1. Judgment: The most basic method to determine whether the headlights are functioning properly is to check if they are still emitting light. Whether it's the front headlights or rear lights, if they don't light up, it indicates that the bulb has burned out and must be replaced. However, if they are not completely broken but just dimmer, with a reddish and dull glow, you should not take it lightly, as this could be a precursor to a malfunction. Reduced lighting capability is also a major safety hazard for driving. 2. Inspection: If the front headlights are damaged, similar lamps are usually used for replacement. Additionally, check if the headlight lens has any cracks, because although surface cracks may not affect the lighting performance of the headlights, moisture can seep into the lamp along the cracks, significantly impacting the performance and lifespan of the bulb.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.