At what position should the pointer be during semi-engaged clutch start?

What are the new regulations for motor vehicle exhaust emission testing in 2021?

Here is an introduction to the new regulations for motor vehicle exhaust emission testing in 2021: 1. Exemption scope: Previously, private vehicles with 7 seats or fewer were exempt from inspection within 6 years. After the reform, the exemption has been extended to vehicles with 9 seats or fewer. Many 7-seat SUVs and MPV models have benefited from this reform. For vehicles aged 6-10 years, the inspection cycle was once a year but has now been changed to once every two years. 2. Addition of tire tread depth inspection: Tires are crucial for vehicle safety. Severely worn tires can significantly impact driving safety. 3. Wheelbase inspection: Ordinary car owners can generally ignore this, as it mainly targets modified vehicles and trucks. 4. Vehicle lift inspection: The vehicle is lifted to inspect the chassis for oil leaks, water leaks, or any dents and deformations. Many ordinary car owners might not inspect their chassis even once a year, so this inspection undoubtedly provides a strong safeguard for vehicle safety.

1

Share

How wide can a 3.00-10 tire be replaced with?

A 3.00-10 tire can be replaced with a 3.50-10 tire. Here are the situations regarding tire replacement: 1. Severe tire wear: Before traveling, you can judge the degree of tire wear by observing the tire wear marks. The wear marks are generally located in the tire drainage grooves and are trapezoidal rubber protrusions. 2. Severe tire aging: Generally, the tire replacement cycle is 3-5 years or 30,000-50,000 kilometers. Due to different usage environments, to determine whether a tire needs to be replaced, first check the wear and then the age. If cracks appear on the tire tread and sidewall, even if the tire has only been used for one year, it still needs to be replaced. Even if the tire wear is not obvious, it must be replaced after more than 5 years of use. 3. Tire bulging or deformation: Such conditions indicate that the internal metal coils of the tire have been deformed or broken, and the tire must be replaced immediately. Continuing to drive with such a tire may lead to a blowout. 4. Obvious scratches on the tire surface: If the tread is punctured by nails or other objects, holes smaller than 6mm can be repaired, but those larger than 6mm must be replaced.

6

5

Share

3.00-8 Tire Size?

300 indicates that the tire section width is 300mm, and the following 8 means the rim diameter is 8 inches. Tire size specification example (taking 195/55R15 as an example): The international standard tire code represents the section height and aspect ratio percentage in millimeters, followed by the tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code. For example, 175/70R1477H, where 175 means the tire width is 175MM, 70 indicates the tire's aspect ratio is 70%, meaning the section height is 70% of the width, the rim diameter is 14 inches, the load index is 77, and the permissible speed is H grade. Precautions for replacing car tires: When selecting tires, the specifications should be the same as the previous tires and must match the other tire on the same axle, such as speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. The valve should also be replaced because after changing the tire, the aging cycles of the new tire and the valve differ. During the new tire's cycle, the valve may develop issues, which are not easily noticeable, so it's best to replace the valve when changing the tire. Installation direction and inflation: If using the original equipment tire, follow the manufacturer's installation requirements. For non-original tires, generally, the side with the production date should face outward. If it's a directional tire, align the arrow on the wheel with the car's forward direction. When inflating, you can inflate to the maximum pressure allowed by the tire and then reduce it to the manufacturer's standard pressure.

14

1

Share

Does a 2016 car need an annual inspection in 2021?

A 2016 car does not require an annual inspection in 2021. According to regulations from the relevant authorities, new cars that meet national emission standards are exempt from inspection for six years. Below is an introduction to the 2021 vehicle annual inspection rules: 1. Non-commercial vehicles (excluding minivans): Starting from November 20, 2020, non-commercial vehicles (excluding minivans) aged between 6 and 10 years, which previously required an annual inspection, now only require an inspection every two years. This means vehicles within 10 years only need to undergo two on-site inspections—specifically in the 6th and 8 years. 2. Vehicles that have already reached six years: For vehicles that had already reached six years before November 20, 2020, they still require an annual inspection in 2021 after the expiration of their inspection validity period. After the new regulations take effect in 2021, 10-year-old vehicles will be inspected every two years. 3. Vehicles within six years: According to the new rules, vehicles still within six years can be exempt from inspection twice (requiring only an inspection mark application every two years without an on-site vehicle inspection). However, in the 6th and 8 years, the vehicle must undergo an on-site inspection. For private cars older than 10 years, the original inspection cycle still applies: annual inspections for vehicles aged 10 to 15 years, and semi-annual inspections for vehicles older than 15 years.

19

4

Share

How to Operate Push-Button Shifting?

Push-button shifting requires operations on the gear positions. Through a series of operations, push-button shifting can be achieved. Here are the specific methods: 1. P Gear Shifting: P gear stands for permanent parking, similar to the neutral gear in manual transmission vehicles. 2. R Gear Shifting: R gear represents the reverse gear. In this knob shifting system, simply rotate from P gear to R gear directly. 3. N Gear Shifting: N gear stands for neutral gear. Rotate from P gear to R gear and then to N gear. The N gear in automatic transmission is only for temporary parking and cannot represent permanent parking, etc.

3

4

Share

How to Fix a Twisted Seat Belt?

If your seat belt is twisted, you can try the following methods to fix it: 1. Pull it out completely: First, pull out the seat belt as far as possible—preferably all the way—then fold it in half and slowly retract it back. In most cases, this should resolve the issue. 2. Rotate it: Normally, the seat belt anchor point under the seat can be rotated. Simply turn it around the screw once. If there is a blocking plate covering the anchor point, rotation won't be possible. 3. Seek professional help: If you can't fix it yourself, take your car to a 4S shop or a professional auto repair shop to have the issue resolved by experts.

17

5

Share

At what position should the pointer be during semi-engaged clutch start?

What are the new regulations for motor vehicle exhaust emission testing in 2021?

How wide can a 3.00-10 tire be replaced with?

3.00-8 Tire Size?

Does a 2016 car need an annual inspection in 2021?

How to Operate Push-Button Shifting?

How to Fix a Twisted Seat Belt?

Can I Change a Spare Tire on the Highway Myself?

What are the penalties for driving in the wrong lane on highways?

Reasons for Shaking During Start-up of a 500-Kilometer Scooter?

Which cars have a 280 mph speedometer?