At what level of tire wear should they be replaced?

1 Answers
DeKatherine
07/30/25 10:25am
Tire tread groove depth remaining reaches or falls below 1.6 millimeters. The service life of car tires is four years or eighty thousand kilometers, whichever comes first. If there are damages exceeding five locations, early replacement is required. If there is damage on the sidewall, even one instance necessitates replacement. Below is relevant information about tires: Tire lifespan: The wear lifespan of tires is between 30,000 to 50,000 kilometers. If tires haven't reached the wear limit or mileage but have been in use for five years or developed significant cracks on the sidewalls, they should be replaced. Tire material: The main component of tires is rubber. The maximum storage and anti-aging duration for rubber, from natural latex to EPDM and nitrile, does not exceed ten years. The average service life for various rubber products in use is three to five years.
Was this review help?
11
5
Share
More Forum Discussions

What does the maximum speed of a car mean?

Car maximum speed refers to the highest driving speed that a car can achieve on a well-leveled road surface (concrete or asphalt), which is the speed when the driving resistance and driving force are balanced under windless conditions on a flat road surface. The maximum speed is measured in the last 500 meters of a 1.6-kilometer-long test section, with four round trips conducted to obtain the average value. A car is defined as a non-track vehicle powered by an engine, equipped with four or more wheels, primarily used for transporting people and/or goods, towing vehicles that carry people and/or goods, and for special purposes.
17
0
Share

What type of adhesive is used for car windshields?

Polyurethane sealant is used for the installation of car windshields. Polyurethane sealant is a high-strength, high-modulus, adhesive-type polyurethane multi-purpose sealant. It is a single-component, room-temperature moisture-curing adhesive with high solid content, excellent weather resistance, and good elasticity. During and after the curing process, it does not produce any harmful substances and does not contaminate the substrate. If the windshield is not installed properly, the adhesive on both sides of the windshield may not bond tightly with the glass. For example, during high-speed driving, wind may enter the gap between the windshield and the car body, leading to increased noise inside the vehicle. Additionally, when driving on bumpy roads, you may feel a rattling or impact sound from the front of the car. After replacing the windshield, it takes one to three days for the adhesive to fully cure. During this period, to prevent air or water leaks, avoid washing the car for three days. After three days, remove the tape securing the windshield position. Drive smoothly, avoid sudden braking or rapid acceleration, and try to avoid excessively bumpy roads to prevent the windshield from shifting. Keep the maximum speed below 80 km/h. For the first three days after replacing the rear windshield, do not open the windows to prevent the rear windshield from shifting due to wind pressure. Also, avoid inserting parking permits or other cards into the gap between the front windshield and the dashboard.
13
5
Share

What is the horsepower of the Yuchai 4105 engine?

Yuchai 4105 engine has 136 horsepower. Advantages of Yuchai engines: The advantages of diesel engines are high torque and good economic performance. The working process of a diesel engine is similar to that of a gasoline engine in many ways, with each working cycle also going through four strokes: intake, compression, power, and exhaust. However, since diesel engines use diesel fuel, which has higher viscosity than gasoline and is less prone to evaporation, and its auto-ignition temperature is lower than that of gasoline, the formation of the combustible mixture and the ignition method are different from those of gasoline engines. Principle of diesel engines: Diesel engines generally use turbocharging technology. Turbocharging technology can increase the intake air volume of the engine without increasing the engine displacement, thereby enhancing the engine's power. Turbocharging technology has been widely applied in automotive engines. A turbocharged engine has a turbocharger, which consists of two parts: a compression turbine and an exhaust turbine. The compression turbine and the exhaust turbine are connected by the same shaft. The compression turbine is connected to the intake manifold, and the exhaust turbine is connected to the exhaust manifold. When the engine reaches a certain speed, the exhaust gas has sufficient energy to drive the exhaust turbine to rotate. As the exhaust turbine rotates, the compression turbine also rotates, compressing air and delivering it into the engine cylinders. The increased air volume in the cylinders, combined with a corresponding increase in fuel injection, enhances the engine's power.
2
3
Share

What are the types of car paint?

There are two types of car paint: solid paint and clear coat paint. Here is the relevant introduction about car paint: 1. Overview: Car paint is a protective film sprayed on vehicles, a type of coating that makes the car body less susceptible to corrosion and gives an aesthetic impression. Different car paints produce different effects, and the quality of the paint itself, along with the technology and a good painting environment, are crucial. Most car owners invest more effort into beautifying their vehicles, as it is a way to express individuality. 2. Advantages: The paint film has excellent fullness, high gloss, high hardness, and good adhesion. It possesses superior mechanical properties, outstanding gloss retention, weather resistance, and abrasion resistance, as well as good resistance to acids, alkalis, alcohol, and gasoline.
10
1
Share

What does the circle with an R in the car dashboard represent?

The circle with an R in the car dashboard indicates wear on the right brake shoe. Below is relevant information about the dashboard: 1. Concept: The car dashboard is a device that reflects the working status of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front/rear fog light indicators, and warning lights. 2. Speedometer and odometer: The speedometer actually consists of two gauges. One is the speedometer, and the other is the odometer. The odometer is a digital instrument that operates through the engagement of the counter drum wheel's transmission gear with the worm gear on the speedometer's drive shaft, causing the counter drum wheel to rotate. Its characteristic is that the upper-level drum wheel completes a full rotation.
12
1
Share

Will points be deducted if lane markings are invisible on snowy days?

Generally, no points will be deducted if lane markings are invisible on snowy days. Relevant regulations: Traffic police departments have stated that exposure photos of unclear lane markings due to snow coverage on the road will not be used as evidence. Drivers need not worry, but they are advised to drive at low speeds and follow the instructions of traffic officers during snowy conditions. However, this does not mean drivers can disregard traffic laws and drive recklessly in the snow. Intentional traffic violations, such as illegal U-turns or driving in the wrong direction, will still be penalized according to relevant standards. Tips for driving in snowy conditions: Before heading out, check the vehicle's safety conditions to prevent breakdowns that could affect road traffic. The significant temperature difference between the inside and outside of the car on snowy days can cause fogging on the windows, leading to blurred vision. In such cases, promptly activate the window defogging function or turn on the air conditioning, or use a towel to wipe the windows dry to ensure clear driving visibility. Reduce speed and avoid sudden braking or acceleration. Increase the following distance between vehicles. On snowy days, the following distance should be 2-3 times greater than on dry roads. Drive straight as much as possible and avoid unnecessary lane changes. Generally, avoid overtaking. When driving on icy curves or slopes, reduce speed in advance and pass through smoothly.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.