At What Age Can You Sit in the Front Passenger Seat?

1 Answers
HeidiMarie
07/30/25 7:42am
There are no specific laws or regulations in China regarding the minimum age for sitting in the front passenger seat. For safety reasons, it is recommended that children under the age of 14 should sit in the back seat and use a child safety seat. Regardless of who sits in the front passenger seat, wearing a seat belt is mandatory to ensure safety. Below are detailed explanations about car seat belts: 1. Ensuring Passenger Safety: Car seat belts play a crucial role in protecting passengers, especially on highways where rear seat passengers are also required to buckle up. A seat belt buckle is a device that can be inserted into the car's seat belt socket to prevent the alarm from sounding when the driver is not wearing a seat belt. 2. Ensuring Driving Safety: Seat belts are the primary safety measure for drivers, providing active protection. Even when driving at relatively low speeds, a collision or sudden braking can generate enough inertia to cause passengers to lose control of their bodies, potentially leading to injuries from hitting hard components like the steering wheel or windshield.
Was this review help?
9
4
Share
More Forum Discussions

What is the One-Touch Window Lift Function?

One-touch window lift function is a system that allows the car window glass to be controlled to rise or fall into position with a single button press. Below is a related introduction: How to use the one-touch window lift function: There are two control methods: You can use the unlock and lock buttons on the car's remote key. Press and hold the lock button to raise and close all windows with one touch, or press and hold the unlock button to lower and open all windows with one touch. Alternatively, you can use the button panel on the left handle of the driver's seat. The first gear controls the degree of window opening or closing, while the second gear allows the window to fully open or close. Functions of the one-touch window lift: Generally, mid-to-high-end car models are equipped with the one-touch window lift function, mainly for the convenience of drivers and passengers, avoiding distractions caused by manually operating the windows, and improving safety. One-touch windows usually come with an anti-pinch function to prevent the risk of pinching hands. Only the driver's seat has the one-touch window lift function, which is also a consideration for safety.
5
2
Share

What are the tire specifications for the Dongfeng Honda XR-V?

Dongfeng Honda XR-V uses Bridgestone Turanza ER370 tires with a size of 215/55R17. Below is an introduction to the tire pressure content: 1. The standard tire pressure for Honda XR-V is 2.3-2.5 Bar. 2. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and damage to the engine will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. Extended content: Tire pressure is an indicator of the car's load capacity. The size of the car's load depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.
5
0
Share

What does it mean that you cannot obtain two driver's licenses in one year?

What does it mean that you cannot obtain two driver's licenses in one year? It means that you can only apply for an additional driver's license after the one-year probationary period. Below is relevant information about driver's licenses: 1. Laws and regulations: According to Article 40 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' for first-time applicants or those applying to add a permitted vehicle type, the applicant must schedule the subject two test. 2. Application conditions: To apply for an additional permitted vehicle type, if the original permitted vehicle types are C1, C2, C3, or C4, you need at least 3 years of driving experience and no full-point records in the last 2 scoring cycles to upgrade to a B1 license. For those with B1 or B2 as their permitted vehicle types, at least 3 years of driving experience and no full-point records in the last 2 scoring cycles are required to upgrade to an A2 license. For upgrading to an A2 license with an A1 license, you need at least 1 year of driving experience and no full-point records in the last scoring cycle.
19
0
Share

Is It Safe to Keep Medical Alcohol in the Car?

It is not safe to keep medical alcohol in the car. The hazards of keeping medical alcohol in the car are as follows: 1. It can easily cause spontaneous combustion and explosion: Medical alcohol left in the car during summer can self-ignite. The common 75% medical alcohol has a flash point of 20 degrees Celsius. In summer, outdoor temperatures can reach over 40 degrees Celsius at noon, and after the car is parked outside under the sun for a period, the interior temperature can rise to over 50 degrees Celsius, making it very easy to trigger spontaneous combustion and explosion of the alcohol. 2. Ensure timely ventilation: Since the flash point of alcohol is only 20 degrees Celsius, if the interior temperature of the car is too high, it may cause combustion. Therefore, it is best not to keep alcohol in the car. If disinfection is needed, find an open area to wipe the car interior with alcohol for disinfection, and ensure proper ventilation inside the car for a period afterward. 3. Do not use alcohol on leather seats: When using alcohol inside the car, if the seats or steering wheel are made of leather, directly spraying alcohol on the leather can cause damage. Alcohol itself is an organic solvent, and on cars with lower-quality leather, it may change the originally smooth and uniform color into a texture resembling that of a jaguar.
9
4
Share

Does the ETC card need to be removed?

It can be removed, but the ETC device will not function without it. According to the "Rules for the Use of Non-Stop Fast Pass Systems," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, a prompt sound will indicate that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so the card should be reinserted when needed. ETC is a non-stop electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's on-board electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system uses computer networking technology to settle payments with banks. This allows vehicles to pass through toll stations without stopping, operating on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by enabling vehicles to pass toll stations without stopping. Cost-saving: Reduces wear and fuel consumption by minimizing frequent starts and stops. Improved efficiency: ETC lanes can theoretically increase traffic flow by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: In addition to improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-to-infrastructure coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage.
12
5
Share

Where to Stick the ETC?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for an ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection seal. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by a malfunctioning ETC device in the vehicle ahead, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour. Driving too fast may prevent the system from reading the vehicle's device information, leading to toll deduction failure. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.