At what age can you get a driver's license?

1 Answers
MaximusMarie
07/29/25 2:41pm
Generally, individuals aged 18 to under 70 can apply, but they must also meet other specified conditions. For motorcycle licenses (Class D, E), if applying for only Class D or E motorcycle licenses, the age requirement is 18-60 years. For small vehicle licenses (Class C1, C2, C5), if obtaining a C1, C2, or C5 license, the age requirement is not very strict; the law stipulates that anyone aged 18-70 can apply. Additional details are as follows: 1. Truck licenses (Class A2, B2): To apply for a B2 license, the age must be 20-50 years. For an A2 license, the driver must be 24-50 years old and must have held a B1 or B2 license for more than 3 years. 2. Bus licenses (Class A1, A2, B1): Bus licenses are the most difficult to obtain due to the large passenger capacity, long-distance travel, and high requirements for drivers. To apply for a B1 license, the age must be 21-50 years, and the applicant must have held a Class C license for more than 3 years. The age requirement for an A3 license is also 21-50 years. For an A1 license, the applicant must be 24-50 years old and must have held a B1 or B2 license for more than five years or an A2 license for more than two years.
Was this review help?
10
3
Share
More Forum Discussions

How to Adjust a Car Odometer?

Car odometer adjustment methods vary by type: 1. Mechanical type: Remove the instrument panel and manually rotate the mechanical gears; 2. LCD display type: Modify the corresponding mileage data in the microcontroller. The odometer consists of a speedometer and a mileage counter, located directly in front of the driver's position. Methods to identify actual mileage when purchasing a car include: 1. Check the vehicle's production date; 2. Examine tire wear patterns; 3. Inspect interior condition; 4. Listen for engine sounds; 5. Test drive performance. To read a car odometer: 1. The upper number displays total mileage; 2. The lower number shows trip mileage.
1
3
Share

What Causes Car Shaking and Lack of Power During Acceleration?

Car shaking and lack of power during acceleration can be caused by: 1. Poor fuel quality; 2. Cracked engine intake pipe; 3. Incorrect ignition timing; 4. Fuel injection system malfunction; 5. Faulty throttle position sensor; 6. Catalytic converter failure; 7. Spark plug issues; 8. Slow response from transmission computer. Solutions for car shaking and lack of power during acceleration include: 1. Replace engine intake pipe; 2. Adjust ignition timing; 3. Replace fuel injection system; 4. Replace throttle position sensor; 5. Inspect catalytic converter; 6. Use higher-grade fuel; 7. Replace spark plugs; 8. Replace transmission computer.
19
5
Share

What are the self-rescue methods when a motor vehicle accidentally falls into water?

Here is an introduction to the self-rescue methods when a motor vehicle accidentally falls into water: 1. When the vehicle door cannot be opened after the motor vehicle accidentally falls into water, the self-rescue method is to break the glass to allow water to enter the cabin. This balances the pressure inside and outside the cabin, making it easier to open the driver's door. Once the door is opened, you can enter the water and easily swim to the surface, avoiding danger. 2. When a motor vehicle accidentally falls into water, the water pressure is greater than the air pressure inside the cabin. Therefore, the driver's door cannot be opened. Only when the pressure inside and outside the cabin is equal can the door be opened. The only method at this time is to use a hammer to break the glass and allow water to enter. Hence, it is advisable to keep such tools handy in the cabin for emergencies.
9
1
Share

How Long is a Car Considered Stock?

6 months to 12 months or more is considered stock. Here are the methods to identify stock cars: 1. Check the production nameplate: The vehicle nameplate is located below the B-pillar on the right side of the vehicle, indicating the production date and engine parameter information; 2. Check the glass: The production date and year of the glass are marked on the car windows; 3. Check the tires: Determine the production time by the tire production date; 4. Check the engine compartment: Open the engine and inspect if the engine compartment is clean. Extended content: Potential issues with stock cars: 1. Various fluids, electronic components, batteries, rubber seals, and tires may experience moisture and aging due to prolonged storage without periodic inspection and maintenance; 2. Periodic inspection and maintenance measures are rarely performed.
19
2
Share

What Causes the Pulsating Sound When Opening the Rear Car Window?

This is caused by the resonance between the air vibration frequency after opening the window and the characteristic frequency of the car body. Closing the window can resolve the issue. Below are relevant explanations: 1. Car Windows: Car windows are an essential component of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Windows are categorized by their installation positions: front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics. 2. Resonance: Resonance is a frequently used technical term in physics, referring to a phenomenon where a physical system vibrates with greater amplitude at specific frequencies and wavelengths compared to others.
12
1
Share

How to Remove the Evaporator Box of a Camry?

To remove the evaporator box of a Camry, follow these steps: 1. Remove all components including the dashboard, inner beam, steering wheel, blower assembly, and wiring harness. 2. Take out the evaporator box assembly. 3. Disassemble it and remove the evaporator box. The Camry is a mid-sized 4-door, 5-seater sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.0L naturally aspirated engine and a CVT transmission, delivering a maximum power of 131 kW and a maximum torque of 210 Nm. The Camry features front-wheel drive, with a front MacPherson strut independent suspension and a rear E-type multi-link independent suspension.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.