···
Log in / Register

At how many kilometers should the Jetta VS5 undergo its first maintenance?

3 Answers
DiTucker
09/04/25 7:08am
Jetta VS5's first maintenance is at 5,000 kilometers. The maintenance schedule for the Jetta VS5 is similar to that of regular cars, with the first maintenance recommended at 5,000 kilometers or approximately six months. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance scope of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The Jetta VS5 is the first SUV model under the Jetta brand, with a body length, width, and height of 4419mm, 1841mm, and 1616mm respectively, and a wheelbase of 2630mm.
Was this review help?
7
5
Share
StCollin
09/16/25 7:57am
I previously drove a Jetta VS5, and the recommended mileage for the first maintenance is between 5,000 to 10,000 kilometers, preferably around 7,500 kilometers. Remember, after buying a new car, once you reach this mileage, you should go to a 4S shop or a professional repair center to check the engine oil, filters, and key components. That time, I drove 6,000 kilometers before getting it serviced, and it turned out there was some engine oil consumption. The maintenance technician said that during the break-in period of a new car, you should be more diligent with maintenance; otherwise, it might harm the engine in the long run. When driving, always pay attention to the dashboard alerts and don’t delay too long—safety comes first. Developing a habit of regular maintenance can make your car run more smoothly and extend its lifespan.
Was this review help?
16
4
Share
Expand All
HarrisonDella
10/30/25 8:33am
As a seasoned car enthusiast, I know that the first maintenance standard for the Jetta VS5 is around 10,000 kilometers. I often discuss this in group chats—breaking in a new car properly is crucial. Remember to schedule maintenance when approaching this mileage, don't wait until the engine starts making strange noises. During maintenance, the technician will change the oil and check tire pressure. Last time I delayed until 11,000 km, and my car's fuel consumption became slightly higher—now I've learned to handle it proactively. In daily use, pay attention to the odometer and maintenance light reminders—it saves money and gives peace of mind.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What is the engine speed during startup?

Different vehicle models have varying startup speed values due to differences in engines. The cold-start engine speed typically ranges between 1000-1400 RPM. The general idle speed falls within the range of 500 to 850 RPM, while the instantaneous idle speed during a cold start is around 1500 to 2000 RPM. Once the engine coolant temperature returns to 90 degrees, the idle speed stabilizes within the specified range. After a cold start, there is a high-idle process, which is more noticeable in winter. This phenomenon is controlled by the vehicle's onboard computer (in vehicles with electronic throttle control systems). When the engine reaches a certain temperature, the idle speed returns to normal. This helps accelerate the engine temperature rise to normal operating conditions during a cold start. In colder seasons, the engine speed may be even higher because too low a speed could cause the vehicle to stall. A slightly higher speed helps warm up the engine faster. However, during a cold start, the speed should not be too high, as the lubricating oil cannot reach the upper part of the engine. To minimize wear, keeping the speed below 2000 RPM is ideal. The engine speed reflects its working condition at all times. If the speed is too low, fuel combustion in the cylinders may be incomplete, leading to carbon buildup in the engine over time, which can cause significant damage. Conversely, if the speed is too high, it can result in greater engine wear.
5
1
Share

What are the three major components of the Trumpchi Shadow Leopard?

Trumpchi Shadow Leopard's three major components are the engine, transmission, and chassis. Below is relevant information about the Shadow Leopard: 1. Dimensions: Measures 4700mm*1850mm*1432mm with a wheelbase of 2736mm, belonging to the standard A+ class. 2. Configuration of the three major components: Equipped with the all-new GPMA 3rd generation 1.5TGDI engine + 7WDCT transmission. 3. Driving modes: The Shadow Leopard offers four driving modes - Sport, Comfort, Eco, and Sport+ Extreme. 4. Styling: The Shadow Leopard has launched two mass-production models - Sport styling and Fighter Jet styling, catering to both performance-oriented and family-oriented user groups.
19
5
Share

Volvo XC60 Function Buttons?

1. The left side of the steering wheel features cruise control functionality: The XC60's steering wheel and instrument panel are identical to the S80's design. The layout of the function buttons in the 'T'-shaped control area, the floating center console, and the gear arrangement are also exactly the same as the S80. However, the multimedia display above the central air conditioning and the wood grain center console trim are unique to the XC60. 2. The buttons on the right side of the steering wheel allow for volume adjustment, song switching, and other functions, making them very convenient to use: The interior of the new XC60 is full of vitality. All passengers can sit comfortably in the newly designed seats. The stylish and slim center console features a fresh design and a new integrated display. The dashboard inside the car tilts toward the driver's side, embodying a fully driver-centric design philosophy that gives the driver a strong sense of control while driving.
18
0
Share

Where is the engine number located on the Maxus T60 engine?

The engine number of the Maxus T60 is located at the connection point between the engine and the transmission, typically consisting of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license contains the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production number of the engine, where each engine can only have one unique engine number, and no two engines share the same number.
16
1
Share

How many liters of engine oil should be added to a Volvo S90 T5?

Volvo S90 T5 requires 4.5 liters of engine oil. More relevant information is as follows: 1. In terms of power: The Volvo S90 is equipped with a 2.0T turbocharged engine, integrating a reversible electric motor (ISG) as part of Volvo's 48V mild hybrid system, paired with an 8AT transmission. 2. Design: The Volvo S90 is built on the SPA modular platform and comes standard with double-glazed side windows. The front side windows contain a plastic soundproofing material in the interlayer, effectively blocking noise and UV radiation, enhancing the glass's protection level, creating a private space, and optimizing cabin safety.
17
3
Share

Where is the USB port in Volvo?

Volvo XC60 USB port is located inside the center armrest box of the vehicle. The main functions of USB ports in cars are: utilizing the vehicle's standard power supply to charge electrical devices via USB interface, or serving as fixed power supply ports for electrical equipment. More relevant information is as follows: 1. USB Bus: As a high-speed serial bus, USB's extremely fast transmission speed meets the requirements of high-speed data transfer application environments. This bus also features simple power supply (bus-powered), easy installation and configuration (supporting plug-and-play and hot-swapping), simple port expansion (up to 127 peripherals can be connected via hubs), diversified transmission modes (4 transmission modes), and excellent compatibility (downward compatible with product upgrades). 2. Universal Serial Bus: Since its introduction, Universal Serial Bus (USB) has successfully replaced serial and parallel ports, becoming one of the standard and essential expansion interfaces for numerous computers and smart devices in the 21st century, now developed to USB 4.0 version. USB boasts advantages such as fast transmission speed, convenient usage, hot-swapping support, flexible connectivity, and independent power supply. It can connect various peripherals including keyboards, mice, and mass storage devices, and is also widely used in smartphones. Data interaction between computers/smart devices and external environments mainly relies on networks and USB interfaces.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.