At how many kilometers is the second maintenance for Mercedes-Benz?

2 Answers
OAmir
07/28/25 10:19pm
Generally, the second maintenance for a car is at 10,000 kilometers. Below are the contents of the second maintenance and the functions of car maintenance: Items for the second maintenance: Replace the three filters: oil filter, air filter, and cabin air filter; check fluids: inspect whether brake fluid, transmission fluid, and power steering fluid need replacement; inspect external components: check brake pads, tires, suspension, etc.; inspect internal components: examine spark plugs, throttle body, fuel delivery system; other checks: rotate front and rear tires, inspect conventional lights, battery, etc. Note that for the second car maintenance, no additional replacements or cleaning, such as engine cleaning, are required. Functions of car maintenance: The purpose of car maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
Was this review help?
3
5
Share
KarterAnn
08/12/25 2:50am
The second maintenance for a Mercedes-Benz is generally recommended between 15,000 to 25,000 kilometers. When I first helped someone with maintenance, I noticed significant variations between different models. For C-Class or E-Class, around 20,000 kilometers might be appropriate, but if you drive a performance AMG version, the interval may need to be shortened to 15,000 kilometers. I always emphasize checking the owner’s manual because the manufacturer’s recommendations are the most reliable. Driving habits also play a role; for example, frequent city traffic jams or long highway drives can increase wear, requiring adjustments to the maintenance schedule. Timely maintenance can extend engine life and save money by preventing minor issues from turning into major repairs. I’ve seen many people delay it too long, leading to problems like faulty spark plugs or oil filters, which ended up costing them unnecessary repair expenses. So, keep an eye on the odometer and stick to the schedule—your car will run smoother that way.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

Should I go to a 4S shop or an outside repair shop for tire patching?

For tire patching, you can choose to go to a 4S shop or an outside repair shop. Here are some relevant precautions for car tire patching: 1. Pay attention to patching vs. replacing tires: If there is a wound larger than 6cm on the tire wall (i.e., the side of the tire), it is best to replace the tire with a new one. 2. Pay attention to the tools used: If you choose to use an automatic tire repair agent for patching, be sure to carefully read the instruction manual.
9
1
Share

What materials are required for the 6-year driver's license review?

The materials required for the 6-year driver's license review include: ID card and its copy; driver's license; physical condition certificate issued by a county-level or above medical institution or a military medical institution at the regiment level or above; two one-inch white background color photos; filling out the "Motor Vehicle Driver's License Application Form" and paying the processing fee. The following are the notes for driver's license review: 1. Review system: The vehicle annual review implements an expiration review system, requiring the owner to conduct the review before the expiration of the "Road Transport Permit" review period. 2. Procedures: County-level or above (including inter-county) passenger vehicles, tourist passenger vehicles, and hazardous goods transport vehicles must be reviewed and approved by the Passenger and Freight Management Section of the Municipal Transport Management Office and signed before proceeding to the Transport Management Window at the Administrative Service Center for the annual review procedures. 3. Penalty: For any overdue review, the Municipal Transport Management Office will impose administrative penalties in accordance with the "Road Transport Regulations" and related supporting rules.
5
5
Share

Can the Subject 3 Test Be Scheduled Four Days in Advance?

Whether the Subject 3 test can be successfully scheduled four days in advance depends on the number of people applying for the test. If you're lucky and there are fewer applicants, it might be possible to secure a spot. Here are some details about Subject 3: 1. Scheduling: You can apply to schedule the Subject 3 test approximately ten days in advance. If the application is successful, the vehicle management office or test center will send a message within about a week notifying the examinee of the test time and location. Generally, the results will be announced two days before the scheduled date, and you will receive a confirmation message. However, if the test falls on a weekend, the notification may be issued four days in advance. 2. Content: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive.
6
5
Share

Can a Spare Car Key Start the Vehicle?

Spare keys can start the vehicle. Cars are usually equipped with two keys: a primary key and a spare key. Although there is a distinction between primary and spare, both keys can start the vehicle. Additional information: The differences between a car's spare key and primary key are as follows: 1. Different appearance: The primary key is of the button type, allowing the car door to be opened by pressing the corresponding button on the key. The spare key has a traditional appearance and needs to be inserted into the keyhole on the car door to unlock it. 2. Different types: The primary key is remote-controlled, enabling remote unlocking of the car door and opening of the trunk with the press of a button. The spare key is mechanical, functioning as a standard unlocking key. 3. Different functionalities: The primary key can wirelessly control the car's unlocking feature through a transmitter inside the key, offering powerful capabilities. The spare key requires insertion into the keyhole to unlock the car door.
7
4
Share

What are the three essential insurances for a car?

Here is a detailed introduction to the three essential insurances for a car: 1. Compulsory Traffic Accident Liability Insurance (CTPL): The first insurance to purchase for a car is CTPL, and the law also mandates that this insurance must be obtained when buying a car. Otherwise, new drivers cannot register their cars, and experienced drivers cannot drive on the road. Driving without CTPL can result in severe penalties. 2. Third-Party Liability Insurance: Third-Party Liability Insurance primarily covers the compensation for personal injuries or direct property damage caused to others in accidents involving the insured car. Accidents are the last thing anyone wants during driving, as they not only damage your beloved car but also require a significant amount of money to compensate others. 3. Vehicle Damage Insurance: Commonly referred to as comprehensive car insurance, this insurance differs from vehicle downtime loss insurance. It covers the losses incurred by the insured car due to natural disasters or accidents within the scope of insurance liability. However, it does not include losses caused by earthquakes.
14
3
Share

What causes both the ABS and tire pressure lights to illuminate simultaneously?

The illumination of both the ABS and tire pressure monitoring system indicator lights indicates that the sensors in the vehicle's braking and steering systems have detected a malfunction, triggering the corresponding warning lights. A comprehensive inspection at a 4S shop is required to determine the exact cause of the vehicle's issue. Driving is not recommended when the ABS light is on: An illuminated ABS light signifies a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety risks. Method to reset the tire pressure light: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until a "beep" sound is heard before releasing. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clearing the previous data. Finally, the dashboard warning light will turn off, completing the tire pressure reset process.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.