···
Log in / Register

At how many kilometers does the Leiling Hybrid's spark plug need to be replaced?

1 Answers
VonEmersyn
08/31/25 6:46am
The replacement cycle for the Leiling Hybrid's spark plug is approximately 50,000 to 60,000 kilometers. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order, and then secure the cover.
Was this review help?
7
1
Share
More Forum Discussions

How to Start a Levin?

The method to start a Levin is: 1. Insert the key and turn it to ACC position; 2. Observe the instrument panel, after the vehicle completes the detection of airbag electronic components, turn the key to START position to ignite and start the engine; 3. Immediately return the key to its original position after successfully starting the engine. Taking the 2021 Levin as an example, it belongs to the compact car category, with body dimensions of: length 4640mm, width 1780mm, height 1455mm, wheelbase of 2700mm, fuel tank capacity of 43L, and curb weight of 1410kg. The 2021 Levin features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 98PS, maximum power of 72kW, maximum torque of 142Nm, paired with an electronic continuously variable transmission.
17
5
Share

What are the reasons why a car motor won't start?

Car motor won't start due to: severe wear of starter carbon brushes, malfunction of starter control mechanism, or damage to starter clutch. Reasons why a car won't start after being parked for long time are: 1. Car battery is dead; 2. Low temperature causes reduced viscosity and rotation speed of engine oil; 3. Ignition system malfunction; 4. Insufficient fuel level; 5. Excessive carbon deposits inside engine; 6. Damaged fuel pump preventing fuel supply from fuel tank for combustion. Solutions include: 1. Check if battery is dead; 2. Inspect fuel pump for damage; 3. Verify sufficient fuel level; 4. Examine engine sensors for faults; 5. Check ignition system for issues; 6. Use heating rod to warm up engine oil.
8
2
Share

What is the width of the Mercedes-Benz E300L?

The dimensions of the Mercedes-Benz E300L are as follows: length 4609mm, width 1796mm, height 1460mm, and wheelbase 2789mm. Exterior Design: The sedan version of the Mercedes-Benz E300L shares the same design as the hatchback, featuring Mercedes' latest design language. With its low-slung body, the overall style appears more aggressive. Additionally, the wheelbase is 60mm longer than the hatchback, providing more spacious interior room. Interior Design: The interior instantly sets it apart from competitors. It's hard to imagine Mercedes offering such an interior at this level. The signature steering wheel is very premium, and the large central display and instrument cluster share the same LCD screen, which is a significant advantage in its class. The air vents still feature the circular design typical of C-segment cars, stylish and refined.
1
3
Share

What is the method for removing the cabin air filter of a Volvo XC60?

Volvo XC60 cabin air filter removal method is as follows: 1. After removing the clips located in the front part of the engine compartment on the passenger side, take out the sound insulation cotton; 2. Remove the cover plate, take out the old cabin air filter, and replace it with a new one. Taking the 2020 Volvo XC60 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4688mm, width 1902mm, height 1658mm, and a wheelbase of 2865mm. The curb weight is 1801kg. The 2020 Volvo XC60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 300Nm, paired with an 8-speed automatic transmission.
4
2
Share

Where is the cabin air filter located in the Mazda3 Xingcheng?

The cabin air filter of the Mazda3 Xingcheng is located inside the sound insulation panel above the coolant reservoir. It can be accessed by removing the four rivets on the insulation panel. Taking the 2015 Mazda3 Xingcheng as an example, it belongs to the compact car category with body dimensions of 4505mm in length, 1755mm in width, and 1470mm in height, featuring a wheelbase of 2640mm. It has a fuel tank capacity of 55 liters and a curb weight of 1246kg. The 2015 Mazda3 Xingcheng is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.6L naturally aspirated engine delivering a maximum horsepower of 107PS, a peak power output of 79kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
1
Share

What is the solution if a car exceeds its first maintenance period?

The solution for a car exceeding its first maintenance period is to negotiate with the 4S dealership. The main tasks during the first maintenance include: 1. Changing the engine oil, oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying whether all switches and lights in the car are working properly. Precautions for the first car maintenance are: 1. Make an appointment in advance; 2. Record any malfunctions or questions encountered while driving and inform the staff during the maintenance registration.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.