Are Weizhi and Vios the Same Car?

1 Answers
LaLilliana
07/29/25 4:27pm
Weizhi and Vios are not the same car. Vios: The Vios is a family-oriented entry-level model specifically designed and developed by Toyota for the Asian market. Based on the NBC platform and with an extended wheelbase, the Vios, developed on a small car platform, almost reaches the level of a compact sedan. It is highly dynamic yet robust; the interior space is exquisitely crafted, combining high-end design with cutting-edge technology. It is the unification of these characteristics at a high level that has created this Toyota sedan for the new century. Weizhi: The Weizhi is equipped with three engines, which cover the golden displacement range for current economical cars: 1.3L, 1.4L, and 1.6L. The first to be launched was the tested 1.3L displacement. Its engine is the Toyota 8A engine, which has been tested in China for over a decade. This engine is now widely praised for being 'tough and durable,' with durability and economy being its most convincing features. Additionally, it boasts low noise and low maintenance costs.
Was this review help?
19
1
Share
More Forum Discussions

Where is the license plate with Lu A from?

Lu A is the license plate of Jinan City, Shandong Province. Generally, the first character of a license plate is a Chinese character, which mainly represents the abbreviation of the province where the vehicle is located. For example: Hu represents Shanghai, Lu represents Shandong, etc. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered. Usually, A represents the provincial capital city, while B represents the second largest city in the province. More information about vehicle license plates is as follows: 1. A vehicle license plate is a plate hung on the front and rear of a vehicle, usually made of aluminum, plastic, or stickers. It displays the vehicle's registration number, registration region, or other basic information. 2. The license plate is a unique identifier for each vehicle. Its main function is to identify the province, city, or county where the vehicle belongs. The vehicle management office can trace the owner of the vehicle through the license plate.
9
2
Share

What are the steps for matching shock absorbers after replacement on a Mercedes-Benz?

Use a computer to access the vehicle's suspension control unit, first activate the height adjustment, then perform manual adjustment, and finally carry out height matching, marking the angle values. More relevant information is as follows: 1. Configuration: Mercedes-Benz combines air springs with the Adaptive Damping System (ADS), which comes as standard equipment in the new S-Class. The Adaptive Damping System continuously adjusts the damping force according to requirements, taking into account factors such as road conditions, driving style, and vehicle load. Under normal driving conditions, the system sets the shock absorbers to a soft setting. 2. Damping Force: In more dynamic driving conditions, such as when the car suddenly swerves around an obstacle or during sudden braking, the system can respond within 50 milliseconds to adjust the damping force for each wheel. This way, the "Skyhook" algorithm regulates the damping force, thereby reducing the forces exerted on the body caused by wheel movement.
20
0
Share

Why won't the parking heater ignite?

Parking heater failure to ignite indicates either the parking heater is malfunctioning or the car battery's charging capacity has declined. The parking heater is an onboard heating device for the car engine, equipped with its own fuel pipeline, electrical combustion heating system, etc. It can preheat and warm up a parked car engine in cold winter conditions without starting the engine, preventing cold-start wear on the vehicle. Common parking heater fault analysis: 1. For indicator light flashing situations, check the flashing frequency against the fault code table to identify the faulty component. If the indicator light stays on constantly, it may indicate control circuit failure or unconnected ground wire - repair or replace corresponding parts. 2. If the glow plug is damaged, use a multimeter to check the resistance value between the two leads of the glow plug. The resistance should be between 0.6-1.2 ohms. If it's outside this range, replace the glow plug.
4
1
Share

Where is the cabin air filter located in a 2016 Elysee?

The cabin air filter in a 2016 Elysee is located in the glove compartment under the front windshield on the passenger side. Steps to replace the cabin air filter: 1. Open the glove compartment and pull down the small hook on the right side. 2. Squeeze both sides of the glove compartment inward to remove it. 3. The cabin air filter compartment is inside. Release the clips on both sides to pull it out. 4. Remove the filter frame, install the new filter, and reinstall the glove compartment. Additional information: The activated carbon filtration function of the cabin air filter diminishes after prolonged use. Therefore, you can purchase a compatible cabin air filter from the auto parts market for replacement. Generally, it should be replaced monthly during summer. In seasons when the air conditioning is not in use, replacement may not be necessary. If the air conditioning is occasionally used, replacement can be done based on actual usage conditions.
20
2
Share

What should I do if there is a small bulge on the tire? Is it dangerous?

A small bulge on the tire indicates a safety hazard, as it can easily lead to a tire blowout. Especially if this occurs on the front tire, it should be replaced immediately. A blowout can cause the vehicle to lose control, leading to a safety accident. Here are some methods to prevent tire bulges: 1. Tires become thinner with prolonged use, making them more prone to bulging. When the tire wear reaches the level of the tread wear indicator, it should be replaced. 2. Avoid driving at high speeds on rough roads or over speed bumps, as this can impact the wheel rims and tires. If a bulge is not detected in time, further impact may directly cause a blowout. 3. Check tire pressure regularly. If the pressure is low, inflate it promptly, as prolonged low-pressure driving can lead to bulging. 4. When parking, ensure the vehicle is on a flat surface to avoid squeezing the tire sidewalls, which can damage the internal cords.
5
5
Share

How to Steer Through an S-Curve?

When driving through an S-curve, keep the left front corner of your car aligned with the right edge line and the right front corner aligned with the left edge line while steering. Here’s an introduction to S-curve driving techniques: 1. Test Criteria: If any wheel touches the road edge line, 100 points will be deducted (previously, squeezing the edge line resulted in a 20-point deduction, while crossing it led to a 100-point deduction. The new standard raises the penalty for squeezing the edge line to 100 points as well.) Stopping midway also results in a 100-point deduction. 2. Technique: When approaching the entrance of the S-curve, position your vehicle in the center of the road. As you enter the curve, stay close to the right edge line. When the gap on the left side of the engine hood aligns with the right yellow line, turn the steering wheel one full rotation to the left. For the first curve, straighten the wheel by turning it one full rotation to the right.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.