Are Venucia Car Engines Made by Nissan?

1 Answers
RafaelLynn
07/30/25 3:53am
All car engines under the Venucia brand are Nissan engines. This engine performs exceptionally well in terms of power and torque, standing out as a top-tier engine among its peers. Here is an introduction to Venucia cars: 1. Venucia is a new brand launched by Dongfeng Nissan to adapt to the times and trends. It carries the industrial aspirations of Dongfeng Nissan, integrating world-class advanced technology with an approachable attitude and a spirit of excellence, aiming to fulfill the brand dream of bringing joyful and high-quality car life to mainstream Chinese consumers. 2. The Venucia D50 is the first mass-produced model with independent intellectual property rights from Dongfeng Nissan. It shares the same platform as the Tiida, namely Nissan's global B platform. 3. The Dongfeng Nissan Venucia D50 has three core advantages: "spacious and comfortable interior space surpassing its peers, efficient and energy-saving powertrain derived from Nissan, and worry-free global benchmark quality." 4. The Venucia D50 offers a spacious interior, especially the largest rear knee room in its class. 5. Powertrain: The Venucia D50 is equipped with the same Nissan HR16DE engine as the Tiida, with multiple optimizations, achieving a combined fuel consumption of only 6.4 liters per 100 kilometers, the lowest in its class. 6. Quality: The Venucia D50 follows Nissan's global quality assurance system and is produced on the same assembly line as Nissan's mid-to-high-end SUVs, the X-Trail and Qashqai, representing the highest quality in its class.
Was this review help?
18
5
Share
More Forum Discussions

How to Start a Car with Push Button Ignition?

First, press the start button once to turn on the ACC light. Then press the start button again, at which point the push-button ignition will turn green, and the vehicle will begin self-check. Allow the vehicle about 5-8 seconds to complete the self-check. Once the self-check is done, press the brake and press the push-button ignition once more to start the car. Here are some precautions for push-button ignition: 1. In case of an emergency while driving, you can turn off the vehicle by either holding down the push-button ignition or pressing it three times consecutively. 2. If you accidentally press the push-button ignition once while driving, the car will not shut off due to built-in safety mechanisms. 3. Although push-button ignition is convenient and eliminates the need for a physical key, always remember to turn off the engine when exiting the vehicle.
7
0
Share

Where is the air conditioning filter of Haima Premacy located?

Haima Premacy air conditioning filter: The air conditioning filter of this model is located behind the glove box, which needs to be removed for access. Generally speaking, the replacement interval of the car air conditioning filter depends on the usage conditions. For urban family cars, it is usually replaced every six months or once a year. More detailed information is as follows: 1. When the car is driving with the air conditioning on, it inhales external air into the cabin. However, the air contains various particles such as dust, pollen, soot, grinding particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. 2. Without the air conditioning filter, these particles can enter the cabin, not only polluting the car's air conditioning and reducing the performance of the cooling system but also causing allergic reactions, lung damage, and irritation from ozone, affecting driving safety. A high-quality air filter can absorb fine particles, reduce respiratory pain, minimize irritation to allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. There are two types of air conditioning filters: one without activated carbon and another containing activated carbon (please confirm before purchasing). The activated carbon filter not only has the above functions but also absorbs a large amount of odors. The general replacement cycle for an air conditioning filter is every 10,000 kilometers.
3
3
Share

What are the differences between independent suspension and semi-independent suspension?

Here are the differences between independent suspension and semi-independent suspension: 1. Comfort. Non-independent suspension connects both wheels with a rigid axle, so when one wheel encounters bumps, the other wheel is also affected, resulting in poorer vehicle comfort. In contrast, independent suspension allows the left and right wheels to operate independently. When one wheel encounters road irregularities, it does not affect the other wheel, providing better vehicle comfort. 2. Handling. Independent suspension offers better handling, with the front suspension having a greater impact on the vehicle's handling performance, while the rear suspension has a slightly smaller effect. 3. Cost and cabin space. Compared to non-independent suspension, independent suspension, although not necessarily high-tech, has a more complex structure and higher manufacturing costs. While it improves comfort, it also increases the vehicle's price. Additionally, the complex suspension structure may occupy some cabin space, making the already limited interior space of compact cars even more cramped. Therefore, most compact cars use non-independent rear suspension.
14
3
Share

How to distinguish the 2019 Envision?

Before the 2019 model, the Envision only had a 1.5T variant, and the 2.0T model used a 6-speed automatic transmission. The 2019 Envision offers both 1.5T and 2.0T variants, with the 2.0T model featuring a new 9-speed automatic transmission. Below is more information about the Envision: 1. The Envision is a midsize SUV under the Buick brand, equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers a maximum power of 124 kW and a maximum torque of 250 Nm, with peak power at 5,600 rpm and peak torque between 1,700 and 4,400 rpm. This engine features direct fuel injection and an aluminum cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine produces a maximum power of 191 kW and a maximum torque of 400 Nm, with peak power at 5,500 rpm and peak torque between 3,000 and 4,000 rpm. This engine also features direct fuel injection and an aluminum cylinder head and block. It is paired with a 9-speed automatic transmission. 4. The Envision uses a MacPherson strut front suspension and a multi-link independent rear suspension. The Envision also offers all-wheel-drive (AWD) models, which come with an on-demand AWD system and a multi-plate clutch central differential.
15
5
Share

What does the '4S' in a 4S store mean?

Automobile 4S store's '4S' refers to Sale (whole vehicle sales), Sparepart (spare parts), Service (after-sales service), and Survey (information feedback). Advantages of automobile 4S stores: 1. Service. Generally speaking, the staff in 4S stores have undergone systematic training, providing relatively comprehensive services. 2. Brand. Each 4S store represents a car brand, and the store basically covers all models under its brand, so consumers can have a more comprehensive selection when choosing a car. 3. Interaction. Automobile 4S stores will regularly hold various activities and interact with customers, integrating automobile enterprises and brand culture into the customer base. Disadvantages of automobile 4S stores: 1. High cost. 2. High risk.
17
0
Share

How Many Colors Does FAW-Volkswagen Jetta VS5 Offer?

Jetta VS5 offers a total of five color options: Lemon Gold, Incense Gray, Moonlight Silver, Polar White, and Agate Red, with Lemon Gold being the signature color. Below is the relevant introduction of Jetta VS5: 1. In terms of body dimensions, the car has a length of 4419mm, a width of 1841mm, a height of 1616mm, and a wheelbase of 2630mm. 2. It is equipped with a 1.4T L4 turbocharged engine, model EA211-DJS. This engine has a maximum horsepower of 150PS, a maximum power of 110kW, a maximum power speed range of 5000-6000rpm, a maximum torque of 250N.m, and a maximum torque speed range of 1750-3000rpm. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The drivetrain is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.